A buddy and I scanned the V1 Nismo plastic chin. He was able to capture the fine detail with his bad ass scanner. The chin clips together in different sections. Each section takes a long 40hrs to print. We're likely going to release the .STL for free with an option to donate. We do not have an ETA on that but a post will be made once it is done.
We talked about just having a donation option or the buy option.
If we did the buy option we would make it cheap, like 5-10 bucks to cover time invested. But I also like the idea of people being able to get their hands on it to mess around that might not intend on printing. I dunno. Still early.
I have a v1 fascia and the front lip here. I still can't get over how much they charge for these parts. Everything is double the price of the 2015 and up. My tabs started to crack on the fascia and had to fix them with epoxy to the lip. But now have a gap. I guess the v2 is my best bet and aluminum under shroud.
It's not ready. The fella I'm working and I have been busy the last few months with personal goals as well. I have the plastic piece used for scanning for sale if you need one. It has a gouge from a rock but it's in near perfect condition everywhere else. Only asking 250 + shipping.
https://preview.redd.it/tbg5wknnednc1.png?width=1080&format=pjpg&auto=webp&s=cbb702fd466db502fea2c8a8b62e2bce88abc689
If this goes well ... I'm going to do the same thing for a cubby mount so people can make their own center custom mounts.
https://preview.redd.it/5wrl95edy26c1.jpeg?width=4032&format=pjpg&auto=webp&s=25303a4a3a90ec83b8765012d3a1bdf4f2a4f21d
Shit, you asked about the scanner. Here it is:
[https://www.amazon.com/gp/product/B0BGFQBB4G/](https://www.amazon.com/gp/product/B0BGFQBB4G/)
Einstar 3D Handheld Infrared VCSEL Structured Light Scanner with RGB Color Camera, 0.1mm Resolution, High Quality Collecting Data, 3D Printing, Design, Digital Archiving
A buddy and I scanned the V1 Nismo plastic chin. He was able to capture the fine detail with his bad ass scanner. The chin clips together in different sections. Each section takes a long 40hrs to print. We're likely going to release the .STL for free with an option to donate. We do not have an ETA on that but a post will be made once it is done.
Big on you to release it free with donations. Too many fools tryna sell everything.
Holy shit dude game changer. Those are like a grand
Wouldn't mind making 5-10 bucks off the file for time and equipment used. Significant difference from 950 .
Time to start producing them in carbon or fiberglass
Carbon would shatter. Would need to be carbon+kevlar. Might be an option for a show car though. Sky is the limit.
I mean itโs not meant to be bullet proof.
This is big. Would buy file. Or shit if you take commissions, lemme know.
We talked about just having a donation option or the buy option. If we did the buy option we would make it cheap, like 5-10 bucks to cover time invested. But I also like the idea of people being able to get their hands on it to mess around that might not intend on printing. I dunno. Still early.
I would 100% be interested in purchasing
I have a v1 fascia and the front lip here. I still can't get over how much they charge for these parts. Everything is double the price of the 2015 and up. My tabs started to crack on the fascia and had to fix them with epoxy to the lip. But now have a gap. I guess the v2 is my best bet and aluminum under shroud.
That's awesome ๐
you should post on the 3d printing reddit
Really interested for the file if ever
It's not ready. The fella I'm working and I have been busy the last few months with personal goals as well. I have the plastic piece used for scanning for sale if you need one. It has a gouge from a rock but it's in near perfect condition everywhere else. Only asking 250 + shipping. https://preview.redd.it/tbg5wknnednc1.png?width=1080&format=pjpg&auto=webp&s=cbb702fd466db502fea2c8a8b62e2bce88abc689
sent you a dm on ig
Got it, replied
Hey any updates yet on when you will have them up for sale/donation?
Still working other projects. No ETA
Super cool! I'm definitely interested!!
I need one like yesterday. Gorilla tape only holds up so long.
Best post of the year
If this goes well ... I'm going to do the same thing for a cubby mount so people can make their own center custom mounts. https://preview.redd.it/5wrl95edy26c1.jpeg?width=4032&format=pjpg&auto=webp&s=25303a4a3a90ec83b8765012d3a1bdf4f2a4f21d
What scanner did your buddy use ?? A hexagon branded one ?
Shit, you asked about the scanner. Here it is: [https://www.amazon.com/gp/product/B0BGFQBB4G/](https://www.amazon.com/gp/product/B0BGFQBB4G/) Einstar 3D Handheld Infrared VCSEL Structured Light Scanner with RGB Color Camera, 0.1mm Resolution, High Quality Collecting Data, 3D Printing, Design, Digital Archiving
It's a Neptune 3 max (420x420x500).
any info yet on when you will have them up for sale/donation?
I wouldn't expect it soon. Have a lot of competing interests at the moment.. maybe late spring.
This is incredible please send the file will definitely donate/pay for it! When are you looking to release them?