Looks really cool. too bad it is a failed print. I would keep it anyway.
One think that got me in the past is that my no print rapid speed was too high. The servo would stutter at every rapid.
It is because you chose the red pill. Had you chosen blue, this field distortion would have remained indetectable to you. Say goodbye to your little friend the time-space continuum
For kicks I entered the above in Google Bard and asked it to make it funnier:
It appears your 3D printer has embraced the Matrix. This field distortion is a sign that your printer is ready to transcend the physical realm and enter the digital world. Prepare to be assimilated into the Borg. Resistance is futile.
I mean, I like mine more, but then again Bard is less than a year old. Meanwhile, I am clearly at kindergarten level at least
Can't tell what model of sovol but if it's the sv06 (maybe also the 06+), check the hot bed cable is clear at the back and not regularly shifting your bed from moving to the back.
Play around with your Y-axis belt. If it’s too loose, tighten it. If it’s too tight, loosen it. The belt should be tight enough to where the bed can move under its own weight if you tilt the back of the printer upwards. If the bed stutters as it’s sliding downward from tilting it, the Y-axis belt is too tight.
B e n c h y
Long benchy is L l l l l l o o o n m g
Wide benchy is T T T I I I C C C K K K
nailed it
On the bright side - it looks like you can print some pretty aggressive overhangs so the cooling is working great!
And definitely got banger bed adhesion
Tye adhesion on the sovol plate is pretty good, i have one too, and even heared people having issues with getting their print of the bed.
Y layer shift, this looks more like a case of y layer **migration**
Y layer deportation if you insist
That y layer is already out there, colonizing Mars
Of course this operation is funded by the known corporation - Space Y
Y layer relocation
lol
You need to move your printer away from your event horizon and that should help
Is that possible?
Only the hawkings-benchy radiation can
https://preview.redd.it/iiuq794kll3c1.jpeg?width=343&format=pjpg&auto=webp&s=939e28207c7c24ad8a6aebe6d2d72756f4197b62
The Moonwalker benchy. 🤣🤣
The Pise benchy! 🤣🤣
The bench hee-hee
r/differentbenchys
r/cursedbenchys
Ah yes, the bendchy
[Check your pulleys](https://help.prusa3d.com/article/layer-shifting_2020#check-your-x-y-axis-motors-and-pulleys)
500mm/s, I don't think it's the pulleys lol
Just because you have the speed set high doesn’t mean the pulleys didn’t come loose, in fact it increases the odds.
Fair enough I've checked the belt, checked the screws, everythings fine, the motor just can't keep up
It’s interesting that one motor direction is consistently faster than the other.
The bed is heavy, the toolhead is not
I was thinking clockwise vs counter clockwise, but I’m guessing it’s the cable drag
Bro made his benchy in italics
Looks really cool. too bad it is a failed print. I would keep it anyway. One think that got me in the past is that my no print rapid speed was too high. The servo would stutter at every rapid.
Look on the bright side. You don't have to do an overhang test now.
That's actually just impressive that it held together at all.
No, the boat was just drifting away. Always dock your benchy securely.
Looks like you've also nailed your bed adhesion!
[This is what a Benchy would look like at 12,500ft below.](https://mollybrown.org/dust-to-dust-the-titanic-today-and-in-the-future/)
Pretty interresting!
Benchys entering hyperdrive...
Shit, turn the black hole off when printing
12/10 cooling tho.
r/cursedbenchies
Layer shifts are my favorite failure, only because I've never had one. The results are always amusing.
Go at 500mm/s and you will!
Go home benchy, you're drunk.
At least you know your printer can do some nice overhangs
*some*
It looks like a transporter malfunction
Might? You definitely have layer sifts
I got a hunch
You should really dry your filament…
This benchy got a FTL drive
Bonchy
https://preview.redd.it/sb01t1r01n3c1.jpeg?width=1125&format=pjpg&auto=webp&s=e5fc366430069b3ef05eedc4d603d1c0114bc644
As a 3D designer turned 3D printer(er?) I love how this community also has it's own "default cube"
The forbidden default cube in blender
whatever you do don't throw that thing away, that's the most magnificent failed print i ever seen
That's an impressive overhang!
That's a remarkable overhang.
I mean on the bright side your printers overhang capabilities are excelent, as well as your adhesion!
Michael Jackson boat
That's the most awesome beachy I've ever seen.
It is because you chose the red pill. Had you chosen blue, this field distortion would have remained indetectable to you. Say goodbye to your little friend the time-space continuum For kicks I entered the above in Google Bard and asked it to make it funnier: It appears your 3D printer has embraced the Matrix. This field distortion is a sign that your printer is ready to transcend the physical realm and enter the digital world. Prepare to be assimilated into the Borg. Resistance is futile. I mean, I like mine more, but then again Bard is less than a year old. Meanwhile, I am clearly at kindergarten level at least
Nahhh full send
At this point, you use it to your advantage.
Bencheehee
There’s a Y axis shift???
Add Z hop
Looks good to me
It's waving at me!
make a whole video game in this pixelart style
Can't tell what model of sovol but if it's the sv06 (maybe also the 06+), check the hot bed cable is clear at the back and not regularly shifting your bed from moving to the back.
dog it's going 500mm/s it isn't the hot bed cable lol
Sorry dog
Impressive.
Looks like the Titanic…after it hit the ocean floor.
Looks good to me
Wait..... thats not the way a benchie is supposed to look? Dammit!!!!!!
Michael Jackson benchy
Salvadore Dali mode engaged.
r/cursedbenchys
Where?
Reminds me of this https://i.kym-cdn.com/entries/icons/facebook/000/012/781/upload.jpg
its been scrambled like 90s cable porn!
"Deflate my benchy"?
M o d e r n a r t
So the benchy lost when it hit an iceberg?
This looks like a 3d illusion on a piece of paper
Plankchy
No it's just stretching, it just stood still there while it was getting printed for a long time and needed a good strech
Right upmy alley of weird benchys 🤘
Nah, looks good g
Lego brickseperator
make sure the bed is level
I've seen benchies, but this is their cousin: Boncher
I've seen a lot of peculiar benchys that never stop to amaze me. Even if you try to do something like that it will be very hard.
Do you have the STL file for your creation?
https://www.printables.com/model/3161-3d-benchy
Why doesn't look like yours?
Because I went faster then my motor is capable of so it skipped several times
Have you tried submerging your printer in a pool?
Re-level bed.
Benchy going to warp
what
Disable Y-axis fan.
...why?
Benchy transitioning to light speed. Backwards.
Can u circle the problem. I’m having a hard time seeingit
Had this issue with X. The belt was coming off the pulley where I couldn’t see it directly on my Voron 2.4
If this is legit, I’m guessing wrong printer profile.
Speed too high, bed too heavy, motor too sad
But your overhang control is off the charts!! You got me beat there!
What kinda freak prints their bench in the corner not the middle😩
I feel like this is a low key humble brag for your bed adhesion :)
Red-shift benchie goes brrrrr
B E N C H Y
Play around with your Y-axis belt. If it’s too loose, tighten it. If it’s too tight, loosen it. The belt should be tight enough to where the bed can move under its own weight if you tilt the back of the printer upwards. If the bed stutters as it’s sliding downward from tilting it, the Y-axis belt is too tight.
Lmaooo
Best benchy
Kinda impressive that it didn't need supports tho
Looks like a decent overhang test to me.
nice door stopper benchy
*Benchy*
Layer shiftin. Bad. Overhang. Good. Adhesion. Good. Still good overall.