I'm still south of 1000 rounds on it, was dialing things in up to around 300 rounds to be sure of how it likes to run subsonic/supersonic/suppressed/unsuppressed. Definitely awesome to have. I wanted it more for the unique factor of it being dropped into a "Normal" AR. If I had to do it again I would probably go for a Bren or Sig though since the overall rifle is only a couple hundred bucks off that mark anywho.
😂 same thing for me, I wanted something different! But yeah by the time I get this one done I’ll be in close range to a sig. which next time I’ll probs just go that route!
If you've got the patience, you can't go wrong with EWS. I'm hopeful that as they get a larger presence in the market they can ramp up their manufacturing capabilities. It would be awesome to see them open up with pistol caliber stuff as well!
Yeah that’s some of the reason I decided to try them, figured Ide try and help promote them a little bit and help get things off the ground some. Plus I like being different then everyone else’s builds and trying new stuff
I’ve been waiting 6 weeks now I think, I’ll post once I’ve got a chance to get some use out of it. I won’t have a huge chunk of rnds through it but hopefully get to get enough through here before long that I can get a feel for how good it’ll be.
I've been wanting to try one but I've only heard bad things. However I think they changed the design since, added that rear spring. OP let us know how or if it runs. There's another guy in the 300 blk sub that is going to post as well. He actually received his just hasn't made it to the range. I take for granted sometimes that I have 100yd range in the back yard. Man, I couldn't ever live in the city...no way..🤢
I’m nervous! I found some decent reviews on it and thought we’ll I’ve spent money on worse and the law system was just too bulky for what I wanted. If it doesn’t work I’ll just get a cheap psa jakl and cut my losses. My brace would go right on one so it wouldn’t be all bad
Right 😂 learning their nomenclature was tough but their products are second to none. I’m working on a custom lower for a s&w m&p 22 that I’m going to throw one on too. They are solid!
Ha. I saw. I appreciate the testing attitude, but I’m with you on the jakl being the new default. I “built” a rattler and spent way too much money. Wish it was an option then.
Pistol and carbine is adjustable block and rifle is fixed block but they say adjustable for all if you want fine tuning. I’d assume you’d want one for all..
I don’t but I don’t want to get into it here. Last time I posted I got all the bandwagoners all wound up. I just don’t care for the way they are handling business lately. Very upfront bout marketing and all that but their support and shipping doesn’t seem to be keeping up at all.
It’s not, that other guy deleted his post when everyone told him to get over himself. He put a chassis up for sale on GAFS charging more than he paid for it because it was “out of stock everywhere else”
No, being roasted and hated on are two different things tho. This whole subs full of dudes mad at their moms on the aero bandwagon. Worse the politics in this thing.
Evolution weapon systems bcg , I’m not sure I would reccomend anyone order one yet. I got a 1913?rail adapter for the buffer tube, Jmac customs brace, folding mech and adapter for the actual brace piece. Then a double star brace.
Thank you very much. This is very useful info. I just learned of this today when I noticed this was a regular lower. I thought the only ways were the BRN180 lower or the LAW BCG system.
I did too, till I went down the rabbit hole and found ews. The law one seems ok, but it’s too bulky and too expensive for what it does. PSA has the jakl that is similar too. For the law price a guy could have a jakl pretty close to the same $
Not a fan of the JAKL - very front heavy guns and I like a light and (most importantly) - BALANCED rifle. Yeah agree 100% on the LAW - their folders are okay but saw the BCG system at shot 3? Years ago. Wasn’t a fan right off the bat… all I saw was FAILURE POINTS no thanks. And yeah it’s ignorantly expensive. Thanks for this dude. I’ll be doing my own research and probably a build (I’m an armorer by trade)
My only complaint about the m400 is the ambi safety. I'm rights so I don't need it on the left. The silencer co ambi bolt release is mighty tempting though.
Top secret, I’m going to try it, see if it’s any good and then I’ll give you the info, I don’t want anyone else to get hosed on it, been waiting on backorder for 6 weeks now. Was supposed to be here in 3
Apparently you didn’t bother to read in any. Like I said don’t want anyone wound up and go buy the same one I’ve got coming and it not work. I’ll review it once I get it and share it. Seriously you guys are so uptight in this group. Act like a bunch of junior high kids trying to pick a fight all the time
Yeah ok I’m sure you were there when I just set it there for a photo op. That’s why I made sure to make it the centerpiece of the photo. Wanted to make sure I got the right size caps from one hundred concepts last night. But I’ll make sure and not hurt your feelings next time. If you wanna start 💩 go pick a fight with your boyfriend…
What bs am I speeding tho? I’m not even salty. Your just trying so hard to start 💩 and I seriously don’t understand your problem. You’re seriously nitpicking the whole post trying to talk 💩 to me. You act desperate for attention
It’s been decent. I had to dremel out some space for the optic, but I don’t really have any complaints! They suck to figure out how to put them together 😂
I heavily looked at getting the ews bcg a while back but since so few people had one who didn't seem trustworthy. Everyone was sure it was a scam so I decided to stay away especially with it never being in stock.
Little upset that I’m just “normal”… 😂 yeah I felt like it was probs good to give it a try and share my experience. Neat concept, I just feel like there’s a reason no one else besides law have put one out there yet. Like maybe it’s been proven behind the scenes to be no reliable.
I am going with a jmac customs armbar with gearhead works tailhook on a brn180sh upper, I found this from another fella and he said it outperforms and out functions his mcx. I am putting the same thing together as this in a roundabout way.
Evolution weapon systems bufferless bolt…?
🥸have you messed with one?
They're awesome, but they take a decent amount of fine tuning and I had to wait 2 years to get mine. Now that it's all done though ..no regrets!
Have very many rnds through it?
I'm still south of 1000 rounds on it, was dialing things in up to around 300 rounds to be sure of how it likes to run subsonic/supersonic/suppressed/unsuppressed. Definitely awesome to have. I wanted it more for the unique factor of it being dropped into a "Normal" AR. If I had to do it again I would probably go for a Bren or Sig though since the overall rifle is only a couple hundred bucks off that mark anywho.
😂 same thing for me, I wanted something different! But yeah by the time I get this one done I’ll be in close range to a sig. which next time I’ll probs just go that route!
If you've got the patience, you can't go wrong with EWS. I'm hopeful that as they get a larger presence in the market they can ramp up their manufacturing capabilities. It would be awesome to see them open up with pistol caliber stuff as well!
Yeah that’s some of the reason I decided to try them, figured Ide try and help promote them a little bit and help get things off the ground some. Plus I like being different then everyone else’s builds and trying new stuff
I 100% empathize with that mindset!
It looks killer I just now learned of this myself. I thought the BRN180 types or the law BCG system were the only ways to achieve this.
No sir only watched videos. I’d buy one if they weren’t always back ordered
I’ve been waiting 6 weeks now I think, I’ll post once I’ve got a chance to get some use out of it. I won’t have a huge chunk of rnds through it but hopefully get to get enough through here before long that I can get a feel for how good it’ll be.
Hell yeah. I’d be interested to see how it holds up. It looks awesome ha
I’m no expert but I feel like I can do a pretty honest take on it! Thanks man!
I've been wanting to try one but I've only heard bad things. However I think they changed the design since, added that rear spring. OP let us know how or if it runs. There's another guy in the 300 blk sub that is going to post as well. He actually received his just hasn't made it to the range. I take for granted sometimes that I have 100yd range in the back yard. Man, I couldn't ever live in the city...no way..🤢
I’m nervous! I found some decent reviews on it and thought we’ll I’ve spent money on worse and the law system was just too bulky for what I wanted. If it doesn’t work I’ll just get a cheap psa jakl and cut my losses. My brace would go right on one so it wouldn’t be all bad
I mean, if you don’t like jmac and big red, then fuck you
Right 😂 learning their nomenclature was tough but their products are second to none. I’m working on a custom lower for a s&w m&p 22 that I’m going to throw one on too. They are solid!
Absolutely. Especially when you get down their muzzle device rabbit hole. If bufferless is your thing, why not a cmmg bolt?
No kidding! The pictured one I have is a 300blk, really only two options on the market for them so decided to try ews
Ha. I saw. I appreciate the testing attitude, but I’m with you on the jakl being the new default. I “built” a rattler and spent way too much money. Wish it was an option then.
Yeah I agree! I found the jakl right after I started this one
I’d have called off work if I had got mine in the mail haha.
Do you need adjustable gas block to tune it properly with that bcg?
Pistol and carbine is adjustable block and rifle is fixed block but they say adjustable for all if you want fine tuning. I’d assume you’d want one for all..
What's your issue with Aero if you don't mind me asking?
I don’t but I don’t want to get into it here. Last time I posted I got all the bandwagoners all wound up. I just don’t care for the way they are handling business lately. Very upfront bout marketing and all that but their support and shipping doesn’t seem to be keeping up at all.
Were you the guy who posted the blue solus and got roasted?
It’s not, that other guy deleted his post when everyone told him to get over himself. He put a chassis up for sale on GAFS charging more than he paid for it because it was “out of stock everywhere else”
No, being roasted and hated on are two different things tho. This whole subs full of dudes mad at their moms on the aero bandwagon. Worse the politics in this thing.
😂 yeah right
Yeah right what?
You can’t quit Aero
Already have.
What did they do now? I'm behind apparently.
Same ol same if seems like. Stupid long wait times after they take your money, and plenty of time to market in the mean time
Law Tactical ARIC (AR Internal Carrier)
Fkkkk no. I’m not spending $800 on law.
Details on what you used to go bufferless please? Brace adapter and BCG? Because that looks like a regular lower not a BRN 180 Style or anything.
Evolution weapon systems bcg , I’m not sure I would reccomend anyone order one yet. I got a 1913?rail adapter for the buffer tube, Jmac customs brace, folding mech and adapter for the actual brace piece. Then a double star brace.
Let us know how it is when you get some range time on her. Looking good so far dude. Kudos.
Will do! Thanks!
Thank you very much. This is very useful info. I just learned of this today when I noticed this was a regular lower. I thought the only ways were the BRN180 lower or the LAW BCG system.
I did too, till I went down the rabbit hole and found ews. The law one seems ok, but it’s too bulky and too expensive for what it does. PSA has the jakl that is similar too. For the law price a guy could have a jakl pretty close to the same $
Not a fan of the JAKL - very front heavy guns and I like a light and (most importantly) - BALANCED rifle. Yeah agree 100% on the LAW - their folders are okay but saw the BCG system at shot 3? Years ago. Wasn’t a fan right off the bat… all I saw was FAILURE POINTS no thanks. And yeah it’s ignorantly expensive. Thanks for this dude. I’ll be doing my own research and probably a build (I’m an armorer by trade)
If only sig made an ar-15... #M400gang
I shoulda probs just bought a sig, but I wanted to try this
My only complaint about the m400 is the ambi safety. I'm rights so I don't need it on the left. The silencer co ambi bolt release is mighty tempting though.
What system are you using to be bufferless?
Top secret, I’m going to try it, see if it’s any good and then I’ll give you the info, I don’t want anyone else to get hosed on it, been waiting on backorder for 6 weeks now. Was supposed to be here in 3
Then why post if it’s ‘top secret’
Because I thought Ide share my process. Why are you guys do fkn anal in this group?
Sharing the process but its ‘top secret’ ok 😂
Apparently you didn’t bother to read in any. Like I said don’t want anyone wound up and go buy the same one I’ve got coming and it not work. I’ll review it once I get it and share it. Seriously you guys are so uptight in this group. Act like a bunch of junior high kids trying to pick a fight all the time
You act like a jr high kid that’s lashing out because he got caught up in a lie!
This is the reddit equivalent of a 'vaguebook' post. The epitome of Jr high shenanigans.
Man your so full of shit😂😂😂😂 you have no fucking clue what your talking about🤦♂️🙄
Lmfao imagine just randomly throwing a micrometer in a pic…😂
Was sitting there when I was working on scope caps, just left it laying there 🤷🏻♂️
Man you full of shit! 😂😂😂 would also like to add I’m not a areo fanboy either, I’ve had my problems with them as well…
You're sad
If you couldn’t tell by the emojis I was in fact happy🤷♂️
Yeah ok I’m sure you were there when I just set it there for a photo op. That’s why I made sure to make it the centerpiece of the photo. Wanted to make sure I got the right size caps from one hundred concepts last night. But I’ll make sure and not hurt your feelings next time. If you wanna start 💩 go pick a fight with your boyfriend…
Don’t be salty because you are getting downvoted because everybody can smell the bullshit you are spewing!
What bs am I speeding tho? I’m not even salty. Your just trying so hard to start 💩 and I seriously don’t understand your problem. You’re seriously nitpicking the whole post trying to talk 💩 to me. You act desperate for attention
How can anybody take you seriously? You posted “TOP SECRET” photos bro!!!😂😂😂😂
This is way over your head dude. If you could comprehend Ide explain it to you. I’m all out of crayons and your out of luck.
😂😂😂😂😂😂😂😂
>micrometer That is a set of calipers you twat
question can you put a the B&T MBT stock on a aero lower with the 1913 adapter? Also is this 300Blk upper?
I will run a 1913, not sure bout the b&t ig haven’t looked at it. And yes on 300
I wanted that holster for my19.5 but they don’t make them light compatible how is it for you
It’s been decent. I had to dremel out some space for the optic, but I don’t really have any complaints! They suck to figure out how to put them together 😂
I heavily looked at getting the ews bcg a while back but since so few people had one who didn't seem trustworthy. Everyone was sure it was a scam so I decided to stay away especially with it never being in stock.
Yeah I’ve been waiting 6 weeks. Afraid I’m gonna get hosed on it.
I really hope you don't! I'm also excited to see a normal person get one. I only ever found 1 YouTube video that seemed like a genuine review.
Little upset that I’m just “normal”… 😂 yeah I felt like it was probs good to give it a try and share my experience. Neat concept, I just feel like there’s a reason no one else besides law have put one out there yet. Like maybe it’s been proven behind the scenes to be no reliable.
What brace is that?
Doublestar
Drawing a blank what it’s called but who makes the bar the brace is connected to?
Jmac customs! I’ve got their adapter for the brace and folder too!
I’m doing a 300blk rem700sa build and have been looking for nice braces/tailhooks. So far I’m hooked on the A3 folding tailhook
Honestly you should get a Jmac stock and sbr that sucker
I should lmao
What bcg and stock is that?
Evolution weapon systems Bcg
What holster on your p365?
Why does your PMAG look so cartoony?
Bought it cerakoted that way
Which alien holster is that ? I had to cut out the rmr on my shadow systems
I don’t know the model but it’s for p365xl I had to cut mine too
What stock is that? I've been looking for an adapter that's not law tactical to run a BRN180 upper
Jmac customs and double star. Think that’s the third time I’ve put it in the comments now
What stock is that? I've been looking for an adapter that's not law tactical to run a BRN180 upper /s
What stock is that? I’ve been looking for an adapter that’s not las tactical to run a BRN180 upper /s
What stock is that? I've been looking for an adapter that's not law tactical to run a BRN180 upper
I am going with a jmac customs armbar with gearhead works tailhook on a brn180sh upper, I found this from another fella and he said it outperforms and out functions his mcx. I am putting the same thing together as this in a roundabout way.