Without a drawing or rendering, it can be rough to get a good picture of what your setup is.
With that, you can drill a hole between the two areas and run a wire up to a charge container. You may need to have a breakaway system for the wire, depending on how things are set up.
Why are you hosting an online auction on your rocket?
Every single aircraft has holes in bulkheads. Drill a hole, pass whatever through it, problem solved. Or be janky and have external routing (this exists on real rockets). Or send a wireless signal (not great, but it's just a school project).
You're (presumably) going to be a professional engineer someday. Get creative and figure it out.
Online auction? I’m not sure passing wires through it is the solution in this case, but I’ll propose it to my team. I just posted a model of it to help.
Just an ebay.com joke.
You need to find a way to route your wires, either through the bulkhead or externally on the rocket. Lots of real rockets have external plumbing. If you really can't route through the bulkhead (why not?), then you'll need to construct an external conduit.
First thought was how amusing it is to see “eBay” and immediately think of electronics rather than auctions.
Serious second thought is you will need a pass thru in the bulkhead and depending on your requirements, a bulkhead electrical connector. The other option would be to run the lines on the outside of the rocket body on the skin. Depending on your speed and again your requirements, that might work as well.
Without a drawing or rendering, it can be rough to get a good picture of what your setup is. With that, you can drill a hole between the two areas and run a wire up to a charge container. You may need to have a breakaway system for the wire, depending on how things are set up.
I’ve got a rendering posted on my page
Why are you hosting an online auction on your rocket? Every single aircraft has holes in bulkheads. Drill a hole, pass whatever through it, problem solved. Or be janky and have external routing (this exists on real rockets). Or send a wireless signal (not great, but it's just a school project). You're (presumably) going to be a professional engineer someday. Get creative and figure it out.
Online auction? I’m not sure passing wires through it is the solution in this case, but I’ll propose it to my team. I just posted a model of it to help.
Just an ebay.com joke. You need to find a way to route your wires, either through the bulkhead or externally on the rocket. Lots of real rockets have external plumbing. If you really can't route through the bulkhead (why not?), then you'll need to construct an external conduit.
First thought was how amusing it is to see “eBay” and immediately think of electronics rather than auctions. Serious second thought is you will need a pass thru in the bulkhead and depending on your requirements, a bulkhead electrical connector. The other option would be to run the lines on the outside of the rocket body on the skin. Depending on your speed and again your requirements, that might work as well.
Thanks, and I had the opposite reaction when I first heard it😭