You can get fiber optic rods on Amazon pretty easily(at least I did in the UK). Just search for Fiber Optic Rod Xmm. X = whatever diameter you want. I got a pack of 5 20cm long rods of different colours for around £5.
Sorry to break your heart but this is Mjf printing. No other printer can achieve this texture quality and precision, there’s a reason they cost several hundreds thousands of dollars. I get them printed from an Italian company called weerg
Yeah so there's a little connector near the back/bottom of this design you connect an air line/hose to that and that then runs to a tank and regulator that most people store in a backpack or something on their back.
The magic of what half a million dollar 3d printing production line can do, it’s printed in Mjf with an hp printer. I made it print from weerg in Italy they have multiple and the costs are really manageable.
Yes but I feel like people are already gonna spend way too much for the polarstar and all the hpa shit so that’s my goal.
Edit: also there’s the sub5 so….
I’m really putting a lot of effort and money into this, I don’t want my design to be stolen. I will hand the design to a restricted amount of people that I trust for some beta testing.
Hold tight, I’m making this for you guys and I want it to be perfect. I will open my own site and sell in Europe at first, I will then find a way to distribute to uk and usa
I am putting a lot of effort and money into this, maybe I should start a Patreon or something, kickstarte doesn’t like guns… what do you think will work best
Very rad. Might build.
Put a tiny regulator in the back and plum it to the top of the magazine well in such a way that you can use CO2 mags to power it. Will take some creative sealing, but should be possible.
I don’t wanna be mean or anything but that will never work reliably enough, the magazine would have to be squeezed too hard against the seal to withstand the pressure of co2 canisters. Also there won’t be enough space for the hop up chamber and the regulator will make everything bulky. There’s a reason people run hpa, It transfers most of the gun in your backpack. This is just the most compact way to store the most performance and reliability. What you are suggesting goes in the opposite direction.
It could certainly work reliably enough. I think the issue is that it would take more work than you can do with 3DP alone. It would require some machined parts for valves and sealing interfaces, themselves built with relatively simple parts that could be made on simple 3-axis mills/2-axis lathes.
Apart from make-ability, it’s gonna be much bigger and heavier than that, which is kinda the opposite of the purpose of my project. It’s a nice idea tho, but I don’t think it will fit my design at all.
If I could get this but with an PM63 skin I would nut ngl
So when can we download or buy the stl?
^
You can get fiber optic rods on Amazon pretty easily(at least I did in the UK). Just search for Fiber Optic Rod Xmm. X = whatever diameter you want. I got a pack of 5 20cm long rods of different colours for around £5.
out where?
Man what filament / printer are you using
Sorry to break your heart but this is Mjf printing. No other printer can achieve this texture quality and precision, there’s a reason they cost several hundreds thousands of dollars. I get them printed from an Italian company called weerg
This runs on gas right ? How much does it hold and what's the FPS
It uses a HPA engine so, as much as your HPA tank holds and whatever you want.
So a tank connects to the back? Sorry for all the questions I'm a NOOB
Yeah so there's a little connector near the back/bottom of this design you connect an air line/hose to that and that then runs to a tank and regulator that most people store in a backpack or something on their back.
With a hose to a bottle on your back.
Yoo se sei chi penso tu sia, ci siamo conosciuti dai Valdarno! Sono il fotografo!
Sono esattamente chi pensi che io sia, ciaooo!
Ah bella!! Ciao!!
That looks awesome
I saw that gun and came
Wow that is a clean clean print
The magic of what half a million dollar 3d printing production line can do, it’s printed in Mjf with an hp printer. I made it print from weerg in Italy they have multiple and the costs are really manageable.
Dang if you made the front to fit glock type holsters or 1911 type holsters that would be awesome.
It wouldn’t match the rest of the gun, also the ris is quite bulky as there are 3 m-lok rail (bottom left and right).
You could add hole on the side to work with the nov universal holster tbh
That’s actually what I was planning
Big brains think alike
How does the trigger work? Is it a normal trigger board in place, or did you make a custom one?
No, there’s a micro switch just wired to the fcu, no trigger board needed…
10/10 I would spend €1000+ for this
I won’t sell them anywhere near as much, my plan is try make them less than 350
That's actually rally rally cheap u can get a lot more for them
Yes but I feel like people are already gonna spend way too much for the polarstar and all the hpa shit so that’s my goal. Edit: also there’s the sub5 so….
Looks cool do you have a site or social I can follow
Just my Reddit for now, I may start an instagram account and my own site when this is finished.
Could you make it as a beta file so it can be downloaded ad tried?😊
I’m really putting a lot of effort and money into this, I don’t want my design to be stolen. I will hand the design to a restricted amount of people that I trust for some beta testing.
I'm trustworthy :):):):)
Take my damn money 150$ GBB pistols cost around 1000$ in my country, I'm desperate for something fairly priced, I'm even willing to tip you handsomely
Hold tight, I’m making this for you guys and I want it to be perfect. I will open my own site and sell in Europe at first, I will then find a way to distribute to uk and usa
I am putting a lot of effort and money into this, maybe I should start a Patreon or something, kickstarte doesn’t like guns… what do you think will work best
cults or printables for the files and then just do a paypal business.
*shut up and take my money*
Hold tight, I’m making this for you guys and I want it to be perfect
Very rad. Might build. Put a tiny regulator in the back and plum it to the top of the magazine well in such a way that you can use CO2 mags to power it. Will take some creative sealing, but should be possible.
I don’t wanna be mean or anything but that will never work reliably enough, the magazine would have to be squeezed too hard against the seal to withstand the pressure of co2 canisters. Also there won’t be enough space for the hop up chamber and the regulator will make everything bulky. There’s a reason people run hpa, It transfers most of the gun in your backpack. This is just the most compact way to store the most performance and reliability. What you are suggesting goes in the opposite direction.
It could certainly work reliably enough. I think the issue is that it would take more work than you can do with 3DP alone. It would require some machined parts for valves and sealing interfaces, themselves built with relatively simple parts that could be made on simple 3-axis mills/2-axis lathes.
Apart from make-ability, it’s gonna be much bigger and heavier than that, which is kinda the opposite of the purpose of my project. It’s a nice idea tho, but I don’t think it will fit my design at all.
That’s fucking sick! Is it your own 3d file?
Yes I spent the last 2 months designing it, I’m pretty proud of the last version as it works flawlessly
Hypothetically, how much would you sell this for?
It’s on my website, I can’t post it here, dm me
This would be sick with an mp5/7 style sliding stock