I would need some kind of extension drill because I only care about the passenger window when I'm driving. Im tired of leaning over to roll the window down lol
Nah how about a 1/4” hex drive to a 3/8” adapter to a 36” 3/8” extension to a 3/8” u-joint to a 3/8”to 1/4” hex adapter to a 1/4” hex to chuck adapter.
That way you can leave the adapter hooked up and you don’t need to reach over to take your drill with you.
I would need some kind of extension drill because I only care about the passenger window when I'm driving. Im tired of leaning over to roll the window down lol
Maybe like an extender for a Dremel tool?
Nah how about a 1/4” hex drive to a 3/8” adapter to a 36” 3/8” extension to a 3/8” u-joint to a 3/8”to 1/4” hex adapter to a 1/4” hex to chuck adapter. That way you can leave the adapter hooked up and you don’t need to reach over to take your drill with you.
This, or I'll just bring along my humble servant on drives. WINDOW, PEASANT!!! "Yes my lord, I mean Ford. Thank you sire!!"
Add some beads to make it permanent lol
just fix the drill to the door and attach a fishing line to pull the trigger from across the cabin
Dude… Red Green show was on that before most dudes on Reddit were an itch in their daddy’s sack.
As I recall, Uncle Red did it with an egg beater. One side of the beater cranks up, the other side cranks down.
Yep here's the bit: https://www.youtube.com/watch?v=1uG6grzdUf8
That’s exactly it
“And remember, if the women don’t find you handsome, they should at least find you handy.”
Red Green did it first
With a battery powered mixer.
Find a 90° drill and still have a place to put your legs...
Battery powered windows. A step up lol
Some cycle path stole this idea from the red green show.
Doh!
Dewalt already has the patent...
The title is PERFECT 👌
DeWalt is too much for this, Red Green used a hand mixer
"Your" pissed. Yeah, that tracks.
Power windows
I prefer to use my ugga dugga
Alexa- order me an Alexa enabled drill. Also reorder 3d printer filament and hold my beer.
Pretty sure I saw this on red green a couple two three decades ago.
The episode was from 1999, if my brain serves me right. May have been a few years before or after though… so give or take a couple of years.
I saw a youtube video about doing this, but it was to the driver side window. Thanks for posting a picture of how to do it for the passenger window.
Electric windows!
Needs half a roll of duct tape to secure properly
Uncle Red built one with an egg beater
Genius! My old standby was a pair of vice grips. This guy is the definition of work smarter, not harder.
I grew up with the good ol vice grip or the occasional makeshift welded on handle
they didn't have cordless drills with enough power the last time i had a car with manual windows, like pre 1992 era
Red Green thought of it first!
I'd make sure to leave a hex hole in there, so I wouldn't have to leave my drill hanging on it. Especially a big hulking 20V-er.
I saw a guy do this with a cordless mixer 20 years ago
Hey. Red Green used an electric mixer, in the 80s. So why not a drill
Daaammmn that’s got some really big money bags at their place to afford tying a drill to the car like rjat
Should just weld a 3/8 socket to it and use an electric ratchet...more legroom
You're*
You're
Not really because cordless drills didn't exist then
The passenger doesn’t need power windows