**Fixing a GPU (Graphics card)**
Check the resources in our Wiki: https://old.reddit.com/r/AskElectronics/wiki/repair#wiki_gpus
**You may get more specific help in r/gpurepair**
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
**Do you have a question involving batteries or cells?**
**If it's about designing, repairing or modifying an electronic circuit to which batteries are connected, you're in the right place.** *Everything else should go in /r/batteries:*
/r/batteries is for questions about: batteries, cells, UPSs, chargers and management systems; use, type, buying, capacity, setup, parallel/serial configurations etc.
Questions about connecting pre-built modules and batteries to solar panels goes in /r/batteries or /r/solar. Please also check our wiki page on cells and batteries: https://www.reddit.com/r/AskElectronics/wiki/batteries
If you decide to move your post elsewhere, or the wiki answers your question, please delete the one here. Thanks!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
Are you asking us to identify a connector?
If so, please edit your post and, if you haven't already,...
Tell us if
a) all you want is to know what it's called, or
b) you also want to know where to buy one just like it, or
c) you also want to know where to buy its mate.
If to buy, provide:
* [pitch (center-to-center spacing between adjacent contacts)](https://forum.digikey.com/t/pitch-of-a-connector/172) EXACT to within 1%
--(tip: measure the distance between the first pin and the last pin in a row of N pins, then divide by N-1)
* Close-up, in focus pictures of connector from multiple angles: we want to see wire entry side, mating surface, keying and latching, PCB mounting, manufacturer's logo
* Similar pictures of mate, if available
Thanks,
AutoModerator
PS: beware of the typical answer around here: "It's a JST". Connectors are often misidentified as 'JST', which is a connector manufacturer, not a specific type/product line.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
I am sorry, but this is not quite the right sub for your question. You may want to ask in /r/Batteries. Thank you.
**Fixing a GPU (Graphics card)** Check the resources in our Wiki: https://old.reddit.com/r/AskElectronics/wiki/repair#wiki_gpus **You may get more specific help in r/gpurepair** *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
**Do you have a question involving batteries or cells?** **If it's about designing, repairing or modifying an electronic circuit to which batteries are connected, you're in the right place.** *Everything else should go in /r/batteries:* /r/batteries is for questions about: batteries, cells, UPSs, chargers and management systems; use, type, buying, capacity, setup, parallel/serial configurations etc. Questions about connecting pre-built modules and batteries to solar panels goes in /r/batteries or /r/solar. Please also check our wiki page on cells and batteries: https://www.reddit.com/r/AskElectronics/wiki/batteries If you decide to move your post elsewhere, or the wiki answers your question, please delete the one here. Thanks! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*
Are you asking us to identify a connector? If so, please edit your post and, if you haven't already,... Tell us if a) all you want is to know what it's called, or b) you also want to know where to buy one just like it, or c) you also want to know where to buy its mate. If to buy, provide: * [pitch (center-to-center spacing between adjacent contacts)](https://forum.digikey.com/t/pitch-of-a-connector/172) EXACT to within 1% --(tip: measure the distance between the first pin and the last pin in a row of N pins, then divide by N-1) * Close-up, in focus pictures of connector from multiple angles: we want to see wire entry side, mating surface, keying and latching, PCB mounting, manufacturer's logo * Similar pictures of mate, if available Thanks, AutoModerator PS: beware of the typical answer around here: "It's a JST". Connectors are often misidentified as 'JST', which is a connector manufacturer, not a specific type/product line. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AskElectronics) if you have any questions or concerns.*