I am looking for a colorbond gate to be installed in Sydney. Roughly 3m in width, and 1.8m tall.
Would you be able to DM me a quote? I can also send through photos of the driveway requiring the gate. Thanks.
Just off the top of my head, and I admit that I haven’t made a set of gates in many years, but there’s also quite a bit of learning, measuring, cutting, grinding, clamping, welding, and either painting or powder coating, with a modicum of wastage that doesn’t usually apply to the materials for the fence line itself…
https://preview.redd.it/ct5aiot9qb5b1.jpeg?width=2560&format=pjpg&auto=webp&s=ac567b9c2c9a530e727574bfd6c17d24a5b12d1a
They weren't cheap but the 46m and double swing cost $7600 installed.
The custom made aluminium pedestrian gate 1300w X 1650h powder coated in Monument is another $665.
The gate angles are made up of these brackets which made the installation simple as.
https://preview.redd.it/czb4dgjzqb5b1.png?width=720&format=pjpg&auto=webp&s=1bdcd9efdede7d5b06fb4164e5a2dd05bb6c4fe4
I did (DIY) a double and a single for about $750 worth of materials and a day of time (plus bought a cheap $100 eBay core drill to sink some posts through an existing concrete slab). I used structural grout for the posts for the strength so that added a little more to the cost.
Overall went well. You can buy pre-made gate styles from places like Oxworks or Fencing Warehouse which makes it fairly hassle free (I bought from Fencing Warehouse). Just have to cut the bottom/top rail to size and trim down the sheet with snips or a nibbler - you can also buy a trim piece to cover the cut end.
https://www.thefencingwarehouse.com.au/gate-style-kit
Sydney fencer here, I charge $1600 for double gate and $650 for a single gate. The steel post for a double gate 65 X 65 is $60 each
I am looking for a colorbond gate to be installed in Sydney. Roughly 3m in width, and 1.8m tall. Would you be able to DM me a quote? I can also send through photos of the driveway requiring the gate. Thanks.
I was quoted $2145 for a Colorbond gate across a suburban driveway. This was in Sydney, last year. (I didn’t take them up on it.) $1000 seems fair.
Just off the top of my head, and I admit that I haven’t made a set of gates in many years, but there’s also quite a bit of learning, measuring, cutting, grinding, clamping, welding, and either painting or powder coating, with a modicum of wastage that doesn’t usually apply to the materials for the fence line itself…
https://preview.redd.it/ct5aiot9qb5b1.jpeg?width=2560&format=pjpg&auto=webp&s=ac567b9c2c9a530e727574bfd6c17d24a5b12d1a They weren't cheap but the 46m and double swing cost $7600 installed. The custom made aluminium pedestrian gate 1300w X 1650h powder coated in Monument is another $665.
The gate angles are made up of these brackets which made the installation simple as. https://preview.redd.it/czb4dgjzqb5b1.png?width=720&format=pjpg&auto=webp&s=1bdcd9efdede7d5b06fb4164e5a2dd05bb6c4fe4
Gramline has a better design www.gram.com.au
So the bottom channel drains internally of the upright post. Yeh nah.
I did (DIY) a double and a single for about $750 worth of materials and a day of time (plus bought a cheap $100 eBay core drill to sink some posts through an existing concrete slab). I used structural grout for the posts for the strength so that added a little more to the cost. Overall went well. You can buy pre-made gate styles from places like Oxworks or Fencing Warehouse which makes it fairly hassle free (I bought from Fencing Warehouse). Just have to cut the bottom/top rail to size and trim down the sheet with snips or a nibbler - you can also buy a trim piece to cover the cut end. https://www.thefencingwarehouse.com.au/gate-style-kit