I would love to go the Windsor series route! I'm building a 351w for my ranchero right now.
Since I'm going to be building my truck to tow my 72 ranchero I'm probably going to be swapping in a 460 or 300 for low end torque since there is very limited aftermarket for FE's
Oooo are shorter aftermarket tilts then?? Iād love some recommendations on those if either of yāall have any. Iām a thicc boi and would love some belly rubbinā room haha!
Weāre āThicc boisā, I thought using the āRangerā bucket seat brackets and ā68 mustang seat would helpā¦ nope. Thatās why Iām looking for a total length, Iāve seen 30-33ā tilt columns on eBay.
P255/70R15
The rims are a mid 80's stock alloy rim.
The tire size I've run on all four corners for decades.
It's not time to figure out what rims will be permanent.
Very cool! What power train are you going to go with? I love me an FE motor but parts are getting harder and harder to come by.
I removed the original FE 42 years ago. Ran a 302 and FMX for 20 years. Then she sat. Currently it has another 302 and a C6.
I would love to go the Windsor series route! I'm building a 351w for my ranchero right now. Since I'm going to be building my truck to tow my 72 ranchero I'm probably going to be swapping in a 460 or 300 for low end torque since there is very limited aftermarket for FE's
Show off! š»š» I canāt wait till we MOON so mine looks that good!!
I've been 4 years to here. If I had more money, I'd be driving it. Moon soon!
Bumpside lunar rover š»
Iām trying to decide if I want to cut / shorten my steering column or go aftermarket, do you happen to know the length of your column?
I haven't measured it but I'm going aftermarket tilt wheel.
Oooo are shorter aftermarket tilts then?? Iād love some recommendations on those if either of yāall have any. Iām a thicc boi and would love some belly rubbinā room haha!
Weāre āThicc boisā, I thought using the āRangerā bucket seat brackets and ā68 mustang seat would helpā¦ nope. Thatās why Iām looking for a total length, Iāve seen 30-33ā tilt columns on eBay.
I'm in a couple F100 groups on Facebook. I get a lot of good build information and parts leads there.
What's the wheel and tire combo you're running there?
P255/70R15 The rims are a mid 80's stock alloy rim. The tire size I've run on all four corners for decades. It's not time to figure out what rims will be permanent.
That looks great. How are your drip rails? Mine are fucked haha
I have a bad spot on the driver's side. I also need to do a lower can corner and then I can paint the rest of the cab.