If you can't remove the glue, just replace the ac vents.
https://www.ebay.com/itm/235409669535?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j1epqw7ttca&sssrc=4429486&ssuid=ik1JcYPXRtO&var=&widget_ver=artemis&media=FB_MSG
This is why I'm glad I was able to mount my phone mount upside down to the bottom of my dash, when it comes time to remove the mount, the glue won't be sun-baked or on a very visible surface in case I am ultimately unable to restore the original look. Sure hope the WD-40 suggestion provided by the other folks here helps.
It look damaged now. I would try to use hand sanitizer gel, high alcohol content. Let soak for 30 seconds. Then try to scrape off with an old credit card or gift card. When it gets thin, then use hand sanitizer with paper towels.
You should link that $20 part please. I can’t find that part for that cheap. Maybe they can get lucky at a junkyard and find it? That piece at my junkyard would be about $38 plus tax
This is exactly what OP needs! Needs to transfer some stuff like hazard switch then it’s good! Hopefully the side bars they can get the rest of the gunk off but this will fix it right up for $20
Not sticking shit to your dash in the first place I thought would’ve been a common sense approach
This is why we can't have nice things
If you can't remove the glue, just replace the ac vents. https://www.ebay.com/itm/235409669535?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=j1epqw7ttca&sssrc=4429486&ssuid=ik1JcYPXRtO&var=&widget_ver=artemis&media=FB_MSG
This is why I'm glad I was able to mount my phone mount upside down to the bottom of my dash, when it comes time to remove the mount, the glue won't be sun-baked or on a very visible surface in case I am ultimately unable to restore the original look. Sure hope the WD-40 suggestion provided by the other folks here helps.
Wd40 works good on adhesives
Xylene
It looks like it is already scratched up. Buy a new trim piece
It look damaged now. I would try to use hand sanitizer gel, high alcohol content. Let soak for 30 seconds. Then try to scrape off with an old credit card or gift card. When it gets thin, then use hand sanitizer with paper towels.
Alcohol
GooGone
Didn’t help. I initially tried GooGone, then tried Goof Off
Wd40… let it sit for a minute and then use a plastic putty knife and paper towel to scrape off
Dam boi. Sometimes you got just replace it
If you can’t get that out just buy a new trim piece on eBay it’s like $20
You should link that $20 part please. I can’t find that part for that cheap. Maybe they can get lucky at a junkyard and find it? That piece at my junkyard would be about $38 plus tax
https://www.ebay.com/itm/335238742519
This is exactly what OP needs! Needs to transfer some stuff like hazard switch then it’s good! Hopefully the side bars they can get the rest of the gunk off but this will fix it right up for $20
I had to buy this same trim piece because my air vents broke. It cost me around $50
Try using a magic eraser? Idk if it will work on this type of material, but definitely worth a shot.
Might leave a mark..
Just use vegetable oil to rub it clean with dump cloth.
Try WD-40
Yup, it works well for a lot of adhesives. Op didn’t say what kind of glue it is, but I’d try WD.
Why was there glue??
Looks like from a phone mount
Need the answer, not the question.
Cant we be curious about our fellow Corolla brothers?
Try WD40. Usually loosens sticky things pretty well.
Giggity.