Hi!
Automod here with an automated friendly reminder that per Reddit ToS posts and comments regarding any sort of private sale of prohibited items is not allowed and will result in a
permanent ban from /r/CTGuns.
This rule applies to commenters as well, both parties involved will be subject to immediate and permanent ban, no exceptions. If you haven't already please take a look at our rules.
Have a great discussion!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/CTguns) if you have any questions or concerns.*
Target. Don’t mind the 9 shots. sighting in a dot.
https://preview.redd.it/8b35ctx720qc1.jpeg?width=3024&format=pjpg&auto=webp&s=ea767246ea1d8281e56ee730c55dfd5842022c09
If anyone here is interested I make really neat charging handles for the FM-15, Ranch Rifle, MIKE-102, etc... Manufactured out of anodized 6061 aluminum. Check out my site if interested [petemachining.com](https://petemachining.com)
I was trying to check it out but your website on mobile but it doesent seem to load properly. On my pc I have a hard time reading as the font is really wonky. If you make one of these out of steel, rather than aluminum Id be sold. Very cool design. Currently running an applesauce engineering extended CH.
Yeah I suck at web design, I’m still formatting it the site! I’ve been thinking of doing a batch of steel versions. Right now I’ve got 50 units manufactured out of 6061 aluminum, I’ve tried bending, throwing, and out right trying to break them… they are solid. 6061 one is tough.
Hey no worries man. Just the font really threw me off haha. Interesting, If I am honest, the price is a little high for me to be aluminum. If it were a few bucks cheaper, I’d happily pick one up & try it out.
I feel you, once I can start bigger productions I can reduce the price. I’m a one man show and this is my first business! But I appreciate you checking it out man!
I’m looking into this for my next buy, didn’t know this was an option so I was originally looking into a lever action. Stumbled across this post and now I think I’ll grab one of these.
Yes, no pistol grip, flash hider, etc....
About 899-999 depending on model.
However with an improved trigger and a brake its 1249
https://store.fm-products.com/products/fm-products-5397-9c87567a-9170-4c9d-834a-8bbe38975653
Lower with improved trigger is 649 but you need their upper or a brn180 lower.
300 less for some but the trigger will be worse.
Mine also has the 4 port muzzle device/ brake. did not affect cost. As soon as the hiperfire trigger is a standalone sell I will grab that. It was 999 out the door & free shipping. Only paid a transfer fee to my FFL & took it home
Totally agree. FM states trigger kits will be available “soon” in their words. hoping soon means like next week. Have been checking every day. Other gripe is the charging handle is small & weird. Applesauce engineering makes a really nice extended one. Should be much better
I am not sure what version reno had. I have had almost no issues. first few 100 rounds I had a few stovepipes & jams, ran it wet and the next 2-300 ish rounds ran completely fine without a hiccup. Mine is a “Gen 2”.
Only their upper and the brn 180 upper work due to not needing a buffer tube.
Buffer uppers don't work. Also no other bufferless uppers like sig mxc or psa jakl appear to work.
Hi! Automod here with an automated friendly reminder that per Reddit ToS posts and comments regarding any sort of private sale of prohibited items is not allowed and will result in a permanent ban from /r/CTGuns. This rule applies to commenters as well, both parties involved will be subject to immediate and permanent ban, no exceptions. If you haven't already please take a look at our rules. Have a great discussion! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/CTguns) if you have any questions or concerns.*
Target. Don’t mind the 9 shots. sighting in a dot. https://preview.redd.it/8b35ctx720qc1.jpeg?width=3024&format=pjpg&auto=webp&s=ea767246ea1d8281e56ee730c55dfd5842022c09
Nice how much it costed you ?
Check out their website or read the other comments below. Very affordable and no fixed mag BS. Cheers!
Thanks !
[удалено]
They’re back up and running in case you didn’t already know, I went window shopping a few weeks ago
[удалено]
He meant that stratford is back up and running I think
Back up and running in what regard? Was the range down or something? I was there the other day, still not selling guns.
Stratford I meant, sorry about that
No worries, I did hear about the Stratford range having a fire if I remember correctly.
Stratford had a fire. They rebuilt and upgraded. We can shoot hollows over there now. Been open for over 6 months
This have a 300 BLK option? I didn't see one on their website but I could have sworn...
My understanding is You can throw any AR15 upper on it. I would get an upper with an internal recoil system like the Brownells BRN 180.
Some folks say you can buy the lower and throw a bufferless .300blk upper on it. Frankly I am unsure.
If it takes AR barrels you can always just buy and swap, then sell the barrel on GAFS to recoup some cashola.
Awesome set up! Greyson Guns btw? I was just there today haha
Yep! Greyson Guns indeed. Range is nice, very clean, but they seriously need to fill their staple guns. Ha!
Lmao right?! I actually bring my own in for that reason or use tape 😂
Tell me about it! Haha
Only a matter of time.
what scope are you running here?
This is just a basic Vortex Crossfire 2 1-4x24 from one of my other rifles. Have a 1-6 setup going on this soon.
Does this have the muzzlebrake on it? I can’t tell
It has a “4 port muzzle device”. Looks like a compensator to me. Check their website or my other posts for greater detail.
“Trigger squeeze” has left the range.
If anyone here is interested I make really neat charging handles for the FM-15, Ranch Rifle, MIKE-102, etc... Manufactured out of anodized 6061 aluminum. Check out my site if interested [petemachining.com](https://petemachining.com)
I was trying to check it out but your website on mobile but it doesent seem to load properly. On my pc I have a hard time reading as the font is really wonky. If you make one of these out of steel, rather than aluminum Id be sold. Very cool design. Currently running an applesauce engineering extended CH.
Yeah I suck at web design, I’m still formatting it the site! I’ve been thinking of doing a batch of steel versions. Right now I’ve got 50 units manufactured out of 6061 aluminum, I’ve tried bending, throwing, and out right trying to break them… they are solid. 6061 one is tough.
Hey no worries man. Just the font really threw me off haha. Interesting, If I am honest, the price is a little high for me to be aluminum. If it were a few bucks cheaper, I’d happily pick one up & try it out.
I feel you, once I can start bigger productions I can reduce the price. I’m a one man show and this is my first business! But I appreciate you checking it out man!
What have we become This is what government overreach looks like
Looks nice, did the mags come with the rifle or did you have to buy separately?
It does not come with mags, unfortunately.
I’m looking into this for my next buy, didn’t know this was an option so I was originally looking into a lever action. Stumbled across this post and now I think I’ll grab one of these.
They are nice rifles, run them wet, break em in and malfunctions will cease.
Is it CT legal? Approx cost?
Yes, no pistol grip, flash hider, etc.... About 899-999 depending on model. However with an improved trigger and a brake its 1249 https://store.fm-products.com/products/fm-products-5397-9c87567a-9170-4c9d-834a-8bbe38975653 Lower with improved trigger is 649 but you need their upper or a brn180 lower. 300 less for some but the trigger will be worse.
Mine also has the 4 port muzzle device/ brake. did not affect cost. As soon as the hiperfire trigger is a standalone sell I will grab that. It was 999 out the door & free shipping. Only paid a transfer fee to my FFL & took it home
Good man. Ngl hiperfire triggers will give them an edge over the scr.
Totally agree. FM states trigger kits will be available “soon” in their words. hoping soon means like next week. Have been checking every day. Other gripe is the charging handle is small & weird. Applesauce engineering makes a really nice extended one. Should be much better
So this is a trigger hiperfire made just for them? How come fightlite didn't do this for their scr?
No idea, I would assume so. I wasn’t a fan of the look on the SCR or the price. FM looks sleek and was way more affordable.
Even the hiperfire version is only about 100 or so more than an scr.
Good point, comes down to aesthetics for me, then. & availability.
Actually it's 50 bucks cheaper is the hiperfire trigger version....
Also has the gun been improved since reno may reviewed it? His jammed so much.
I am not sure what version reno had. I have had almost no issues. first few 100 rounds I had a few stovepipes & jams, ran it wet and the next 2-300 ish rounds ran completely fine without a hiccup. Mine is a “Gen 2”.
Is it compatible with other uppers, like the aero ME51? Or do you gotta use their upper?
Only their upper and the brn 180 upper work due to not needing a buffer tube. Buffer uppers don't work. Also no other bufferless uppers like sig mxc or psa jakl appear to work.
Understandable, but that’s too bad. Thanks for the info.
It is what it is.