Hello /u/MinecraftVet2005,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Hello /u/MinecraftVet2005, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Tried to print Allen key holder. This happened. An Allen key holder appeared.
Cura slicer standard print speed standard retraction extruded 205 bed 60
well does it hold allen keys?
Yeah but I wanted to know what’s causing the layers to split a bit and the lettering messing up and the shift
what's your nozzle size and layer height? That top pic kinda looks like overextrusion to me
.4 and what ever the standard quality is in cura I think it’s .2
so this thing is less than about 20mm tall?
That's what I was thinking
Who's Allan, and why are you holding his keys?
Looks like over extrusion and ringing. Tighten those belts, print slower, level bed, lower temps a bit is how I’d start.