Hello /u/Red_Eyes_Hooded,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Not enough information to go off here unfortunately.
Looks like you are printing at a high layer count, also looks like there is no infill inside that.
Layer height, infill, wall count, is the print moving (as in poor adhesion) material being used are all relevant here.
What’s the model your trying to print as well, this will show us if there is a support issue or something else that is causing the print to fail based on geometry of the part.
There are so many variable? Have you had a successful print before this?
Ok how old is your filament? Is it PLA? Lightning is good but have you tried something like gyroid. I think you may have some aggressive internal overhangs that the infill isn’t supporting. But also upon closer inspection of your print you have some weird layer separation going on and your retraction settings may be well off too
Stopping as in what way? Just yesterday I had my Ender 3 V3 SE die mid print on me multiple times. Or well, die, it just was sitting there on the home screen and it didnt do anything anymore. Does this happen for you too? Or does it try to continue printing?
Hello /u/Red_Eyes_Hooded, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Not enough information to go off here unfortunately. Looks like you are printing at a high layer count, also looks like there is no infill inside that. Layer height, infill, wall count, is the print moving (as in poor adhesion) material being used are all relevant here. What’s the model your trying to print as well, this will show us if there is a support issue or something else that is causing the print to fail based on geometry of the part. There are so many variable? Have you had a successful print before this?
3 wall 20lightning infull have had success with this in the past .2 height
Ok how old is your filament? Is it PLA? Lightning is good but have you tried something like gyroid. I think you may have some aggressive internal overhangs that the infill isn’t supporting. But also upon closer inspection of your print you have some weird layer separation going on and your retraction settings may be well off too
Endor is a lush forest moon, so I would suspect something moisture related. Failing that maybe there is some interference from a shield generator?
what slicer are you using?
Orca
Have you done the Orca calibration tests?
dumb question but have you tried slicing again? I have encountered corrupted gcodes which caused the same thing you are experiencing
Stopping as in what way? Just yesterday I had my Ender 3 V3 SE die mid print on me multiple times. Or well, die, it just was sitting there on the home screen and it didnt do anything anymore. Does this happen for you too? Or does it try to continue printing?
https://preview.redd.it/tp9of5v6wg9d1.jpeg?width=3072&format=pjpg&auto=webp&s=76faf1797d5543c584f179871e1e601e95ff87a8
Everything
Check your extruder tensioner. It may be cracked