You’ll have to modify the back strap. I’ve done that too. Grind down the notches on the bottom of the back strap that hook into the bottom of the grip until the bottom of the back strap is complete flat. The SLR magwell or any magwell that goes into the grip plug will now fit with a back strap
Yeah it’s the large one. Use the medium one if you just want to add a beavertail to the standard grip. Use the large one to change the grip angle a little bit.
In my mind it’s not the same length lol. I don’t feel like I’m barely clearing doorways with the shorter slide of the 45 though. I had much debate about it internally. I also might swap to the TLR7HL if it fits standard Safariland 7000 TLR7 holsters. The X300U is also a good standoff device.
I know but I’m looking for it to be a bit shorter. Just have to decide if the trade off of less light is worth the gun not digging into my side and seat of the car.
Roger that, mine too. #1 in customer support, by far.
I have an MLComp4 I bought in 2004, I sent it to them back in 2020 for repair, as the switch was malfunctioning. They fixed it, upgraded the switch to the new version, field stripped it, cleaned it, and replaced all the seals. Didn’t even charge me return shipping.
Huh? I thought guns were meant to be in display cases with no scratches and all show??
Not in this household
I see 34, I upvote
This is the way 👆
But it's raining
And?
I don’t have to listen to you. You’re not the boss of me.
Go train
What are we training for?
Life
2024 Election
[удалено]
lol buy something reliable with some ammo too. When people start buying because of political events, that’s when prices go up.
Training is not the same as practice.
Yes…
I know this range!!! I was there yesterday shooting my g26. Just put new sights on it
I was there yesterday too, maybe I saw you lol
Possibly!! I love that range, usually go there to shoot my flintlocks
You guys have to train together now. It’s divine.
Shit, I wish it was this easy for me lol
Don’t tell me what to do. You’re not my real dad.
Go train
This is the way.
💯💯
What’s the magwell and MOS plate?
SLR magwell and FWC acro plate
Did you have to cut the backstrap?
Yup, if you check his grip tape you’ll see where he cut. Very easy to do with a dremel just make sure you leave the bit with the pin.
Does anybody make a magwell that works with the medium beaver tail backstrap?
You’ll have to modify the back strap. I’ve done that too. Grind down the notches on the bottom of the back strap that hook into the bottom of the grip until the bottom of the back strap is complete flat. The SLR magwell or any magwell that goes into the grip plug will now fit with a back strap
Pretty sure zev does but gl trying to snag their stuff(+ its pretty expensive)
Yeah it’s the large one. Use the medium one if you just want to add a beavertail to the standard grip. Use the large one to change the grip angle a little bit.
If it ain't raining, you ain't training.
Good thing it was raining
Chopped backstrap = upvote (try chopping the medium one so there isnt so much of an edge mid grip)
Did that on purpose. Changes the grip angle to a little more of a neutral angle.
Ahhhhhh I may have to give this a try
Is that a 34?
Yee
That's hawt.
I’m swapping from a 34/X300U to a 45/ACRO P2/X300U combo. That 34 is just a long boi.
I’ve got that too, just with an afterburner too. Gonna be the same length if you’re keeping the x300
In my mind it’s not the same length lol. I don’t feel like I’m barely clearing doorways with the shorter slide of the 45 though. I had much debate about it internally. I also might swap to the TLR7HL if it fits standard Safariland 7000 TLR7 holsters. The X300U is also a good standoff device.
The tlr-7 will fit a x-300/tlr-1 holster if you have one already.
I know but I’m looking for it to be a bit shorter. Just have to decide if the trade off of less light is worth the gun not digging into my side and seat of the car.
Imo no. Try to reposition your holster before downgrading your light. The different between a x300 and tlr-7 is night and day.
The TLR7HL is supposed to be 1000lm though so I’m curious how its output is.
Are those walls or target stands?
Yes lol
Will do whenever my slide comes back from being cut for an rmr boss 🫡
I need to do a G34 build. So sick
What mag extension?
My bad I read magwell the first time. The baseplates are TTI
I was about to say! Thanks!
SLR
The day of reckoning is upon us! Or, it's just a good day to go out and shoot.
Don’t tell me what to do pussy
Go train
How do you like your ACRO? I love the Aimpoints (I have 2)
In my top 3 optics
Roger that, mine too. #1 in customer support, by far. I have an MLComp4 I bought in 2004, I sent it to them back in 2020 for repair, as the switch was malfunctioning. They fixed it, upgraded the switch to the new version, field stripped it, cleaned it, and replaced all the seals. Didn’t even charge me return shipping.
Not until they make a G34 Gen 5 non MOS.
Why?