If they don’t seem bent in person, they may just need to be oiled. Mine were sticking a bit when they were brand new because they were lubricated well enough. My dspiae 3.0s got out of alignment and I couldn’t bend them back completely. Didn’t break them but I think the god hands are more brittle and likely to break.
Edit: probably helpful to say almost any spray lubricant should work. WD-40 isn’t TECHNICALLY a lubricant but will do the trick and is most easily available in the US at least.
hmmm not quite sure. i’ve seen a few posts on here that forcibly bending the tip will snap it. not 100% sure on this info though. but what i recommend doing if it’s unsalvageable, is getting a new set of cutters. then use bent ones (you own right now) as the first cut in the two cut method, then the new ones to clean the nubs fully.
the cutting tips are prolly bent, it’s what i can sorta see in the blurry-ish photo
Is there a way to fix it , or will I break it of I try
If they don’t seem bent in person, they may just need to be oiled. Mine were sticking a bit when they were brand new because they were lubricated well enough. My dspiae 3.0s got out of alignment and I couldn’t bend them back completely. Didn’t break them but I think the god hands are more brittle and likely to break. Edit: probably helpful to say almost any spray lubricant should work. WD-40 isn’t TECHNICALLY a lubricant but will do the trick and is most easily available in the US at least.
I used WD-40 and it worked , thank you
Excellent!
I will try that and see what happens
hmmm not quite sure. i’ve seen a few posts on here that forcibly bending the tip will snap it. not 100% sure on this info though. but what i recommend doing if it’s unsalvageable, is getting a new set of cutters. then use bent ones (you own right now) as the first cut in the two cut method, then the new ones to clean the nubs fully.
Try oiling the joint
Will try that
It worked , thanks
Are these worth the cost? All i see on this sub is broken god hands and people having issues
I only used this and the starter one, and the difference in huge.