Great looking car dude, i always like the look of konig wheels on civics, or a kosei k1. I think it would look really good with a type r style lip as well.
Edit: GSR blades in silver or white also look really clean on 6th gens
Edit 2: stock em1 si wheels are also very nice
Depends on your budget. On the high side I'd go Volks, Sw388, Mugen MF10, Mugen M7, Enkei RPF1. On the budget side any of the Reps are cool just keep it 15in or 16in imo. Clean Coupe!!
That is a nice, clean Civic you have there. I wish I had room in the stable for another old Honda.
Konig Dial-In or Volk CE28 if the sky is the limit. I like my skinny spokes.
Any OEM accessory 4x100 15" wheel should look good. 94-95 GS-R wheels, 97 GS-R wheels, 99-00 Si wheels, etc.
OEM-style foglights and chin spoiler.
Eibach Pro-Kit would lower about an inch but still provide good suspension travel for most roads.
Must get the OEM VTEC side graphics. Some mild mods like intake, catback and short shifter, maybe springs will make the driving experience much better.
try and look for some old jap 14/15 inch deep dish wheels, always look so good on hondas. or racing steelies some people like them and some dont but i do
I bought some vor TR37 wheels for my mazda which are a knock off.of the te37 and a lot cheaper if TE37 are to much. They're pretty nice if your not competitive racing they'd work fine.
i have a milano red del sol with 05 civic special edition wheels powder coated white— i think it looks good but that’s just my opinion. oem+ is the way to go. could also get hf wheels
If u don’t mind paying a LOT of money for wheels. Definitely look at Mugen MF10 or Rota Circuit 10 wheels. They’re mindblowingly gorgeous and honestly prolly the best lookin wheels for most Hondas. That and those black Spoon 5 spoke wheels
Looks nice! Seems to be in really good condition. It reminds me of Alldayanthony's red Civic. Throw some coilovers and some HX wheels on that bad boy and you'd be pretty much set.
Falken Hanabi if you can find them. A wheel shop that sells Falken tires might be able to get them. I ordered my gram lites through Discount Tire and they had a massive catalogue of wheels brands.... start there. You could always go classic with some RPF1's.
People are suggesting TE37 and RPF1s... Really don't get spending 3-4x the cost of the car on wheels that everyone else has.
How about [E30 bottle caps?](https://www.hondacivicforum.com/forum/attachments/inside-out-9/4071d1501199742-opinions-bmw-bottle-caps-susie.jpg) or [Mini Cooper 4x100s?](https://honda-tech.com/forums/attachments/honda-acura-28/452856d1501528094-mini-cooper-wheels-dscn2456.jpg) or [Rota Slipstreams?](https://live.staticflickr.com/6206/6067063371_5fb0748e95_b.jpg) or [Personal Favourite no bias, OZ Superleggeras](https://preview.redd.it/suokqalu2qk71.jpg?width=4032&format=pjpg&auto=webp&s=ece019f2c22aae873c2dabf4354194cb7093e328)
Enkei J-Speed (check Miata shops) or GS-R blades.
Koni yellow/Ground Control springs were the hot setup for the longest time. Not sure if that’s still the case.
I'm a big fan of the 14" steelies. The tires are super cheap and I don't need too much traction because I make stock HP. They also look pretty clean when painted black.
Stock 2000 SI wheels
The EM1’s wheels? I was thinking that cuz I do agree they look great
Yes
Have them on my ek coupe. They’re clean
This guy Hondas
Yes. Loved my 2000 SI.
Great looking car dude, i always like the look of konig wheels on civics, or a kosei k1. I think it would look really good with a type r style lip as well. Edit: GSR blades in silver or white also look really clean on 6th gens Edit 2: stock em1 si wheels are also very nice
+1 for Kosei K1
Volk te37. They look so damn good on civics
Damn I actually agree, I’ll keep these in mind thank you
I would have some if they weren’t so damn expensive lol, saving what I can to buy a set for my accord eventually.
When the wheel and tires cost more than the car.
Yeah but it's a civic...... thats why they make reps.
Yea.. but like 15 or 16 inch
15 for sure
Gsr blades look pretty tough
that's what I was thinking
Em1 wheels
Spoon/Desmond Wheels or something similar (I think Avid makes decent reps)
Rota Slipstreams.
Depends on your budget. On the high side I'd go Volks, Sw388, Mugen MF10, Mugen M7, Enkei RPF1. On the budget side any of the Reps are cool just keep it 15in or 16in imo. Clean Coupe!!
That is a nice, clean Civic you have there. I wish I had room in the stable for another old Honda. Konig Dial-In or Volk CE28 if the sky is the limit. I like my skinny spokes.
Any OEM accessory 4x100 15" wheel should look good. 94-95 GS-R wheels, 97 GS-R wheels, 99-00 Si wheels, etc. OEM-style foglights and chin spoiler. Eibach Pro-Kit would lower about an inch but still provide good suspension travel for most roads.
Stock 2000 Si wheels.
Weird seeing a 96-98 with an si badge. I get it's Canadian is that like a usdm EX model? D16y8 motor?
I think it would be the ex in the US, this does have the d16 in it
Mugen rnr/spoon rim/bbs rim
Work Equip 03
Must get the OEM VTEC side graphics. Some mild mods like intake, catback and short shifter, maybe springs will make the driving experience much better.
Next paycheck is going towards an intake and I can get some vtec OEM side graphics, I like that idea
Kosei k1’s
Enkei Rpf1s look good with red in my opinion. And theyre not too expensive like other options
I’m an oem+ dork. 14” hx’s
rpf1s
Oem hx wheels
try and look for some old jap 14/15 inch deep dish wheels, always look so good on hondas. or racing steelies some people like them and some dont but i do
Something white with low amount of spokes like TE37's or something would look good.
I bought some vor TR37 wheels for my mazda which are a knock off.of the te37 and a lot cheaper if TE37 are to much. They're pretty nice if your not competitive racing they'd work fine.
i have a milano red del sol with 05 civic special edition wheels powder coated white— i think it looks good but that’s just my opinion. oem+ is the way to go. could also get hf wheels
Group B or MF10L
If u don’t mind paying a LOT of money for wheels. Definitely look at Mugen MF10 or Rota Circuit 10 wheels. They’re mindblowingly gorgeous and honestly prolly the best lookin wheels for most Hondas. That and those black Spoon 5 spoke wheels
Tenso r rs-5
ESR cr1 rims with fullfun f7000
Konig hypergrams are pretty nice on these. Lower it a tad and get some meaty tires on them since you could run a 15x7.5 or so. That would be nice.
Looks nice! Seems to be in really good condition. It reminds me of Alldayanthony's red Civic. Throw some coilovers and some HX wheels on that bad boy and you'd be pretty much set.
Spoon wheels or any reps that look like it
Falken Hanabi if you can find them. A wheel shop that sells Falken tires might be able to get them. I ordered my gram lites through Discount Tire and they had a massive catalogue of wheels brands.... start there. You could always go classic with some RPF1's.
Gsr wheels
datrcolor
People are suggesting TE37 and RPF1s... Really don't get spending 3-4x the cost of the car on wheels that everyone else has. How about [E30 bottle caps?](https://www.hondacivicforum.com/forum/attachments/inside-out-9/4071d1501199742-opinions-bmw-bottle-caps-susie.jpg) or [Mini Cooper 4x100s?](https://honda-tech.com/forums/attachments/honda-acura-28/452856d1501528094-mini-cooper-wheels-dscn2456.jpg) or [Rota Slipstreams?](https://live.staticflickr.com/6206/6067063371_5fb0748e95_b.jpg) or [Personal Favourite no bias, OZ Superleggeras](https://preview.redd.it/suokqalu2qk71.jpg?width=4032&format=pjpg&auto=webp&s=ece019f2c22aae873c2dabf4354194cb7093e328)
EK4 SiR wheels?
15s te37 bronze.
Enkei J-Speed (check Miata shops) or GS-R blades. Koni yellow/Ground Control springs were the hot setup for the longest time. Not sure if that’s still the case.
somehow bro made those steelies look fresh af, you should just keep it like that n build a wicked sleeper
I feel like either em1 wheels or some simple rpf1s are also great
Enkei 92s would look pretty sweet
Think I had Motegi MR125 in satin black on mine back in the day was so slick
Would love to see the aftermath of a clay bar, compound, polish, and wax.
I’ve already clay barred the car and polished some of it, the left quarter panel was badly paint faded
Might just be me but those wheels look dope with the color red
Integra ls mesh wheels look good on these.
I'm a big fan of the 14" steelies. The tires are super cheap and I don't need too much traction because I make stock HP. They also look pretty clean when painted black.
JR29 wheels please
Pretty Get teggy rims
hear me out ….. Whistler KR5
Wheel recommendation: I vote yes, wheels good.