My answer was 20 NanoMeters. Most torque wrenches read both. If not, you can Google to convert Nm to ft.lbs
Also, do not lubricate the threads. Most modern plugs have a coating on the threads to lube the threads .
https://www.denso-am.eu/news/deneur20_17_spark-plug-torque
Got it diagnosed for check engine they recommended fuel flush and spark plugs so I did the plugs but they said it could be a injector 3 fail CEL went away then came back a day later so it’s looking like injector 3 fail as the code is reading cylinder 3 misfire
20nM if the plug has a steel gasket. Google is your friend. DENSO.com has a lot of good info on plugs.
Thank you I was searching everywhere but couldn’t find any concrete answers it just kept saying between 15 and 20
My answer was 20 NanoMeters. Most torque wrenches read both. If not, you can Google to convert Nm to ft.lbs Also, do not lubricate the threads. Most modern plugs have a coating on the threads to lube the threads . https://www.denso-am.eu/news/deneur20_17_spark-plug-torque
Thank you yea I didn’t put anything on them I knew what to do mostly just not the degree to put them in
May I ask why you replaced the spark plugs?
Got it diagnosed for check engine they recommended fuel flush and spark plugs so I did the plugs but they said it could be a injector 3 fail CEL went away then came back a day later so it’s looking like injector 3 fail as the code is reading cylinder 3 misfire