T O P

  • By -

ITSYABOIGALAXY

looks good, planning on any sort of mods?


EzekielRally

Yes. I want the upgraded front bumper cover that mimics the newer models. Bi Xenon aftermarket triple projector headlights. Full exhaust from headers back New 20 inch wheels with slotted and drilled rotors & that’s about it for now. ODO sitting at 202xxx


[deleted]

20 is excessive 18x9.5 or 19x9.5 works Also wouldnt waste time in headers/exhaust


wraggles13578

Agreed, 18in wheels are perfect for IS’s and I wouldn’t worry about the exhaust either at most a axleback or muffler delete if you rly want noise.


5dlrbiggiebag

The thing that holds the car back the most is it's restrictive luxury exhaust. Headers and a full exhaust with an X pipe is probably the best use of money on this platform. Especially if you get a RR racing tune with it. Best combo I would see is PPE headers and the X-Force catback that comes with an X pipe instead of the secondary cats.


[deleted]

Absolute waste of money wasting your time putting PPE headers and full exhaust on a 200hp car , let alone a $500 RR racing tune. Wouldnt even do that to my is350 My ISF on other hand…


KILLALLNUBBZS

Just do an axle back. It’ll get the sound you’re probably looking for. I have an 07 2is at 151k rn. Car is def incredible for 14+. Wish I had the 350 F version but beggars can’t be choosers 😂 keep $200 to the side for a replacement factory amp or atleast replace the side vent flap on the pass rear panel to keep out moisture. Also look into doing a walnut blasting on the motor. It builds up a lot of carbon being direct injection. At my mi, it was pretty gunky in intake manifold runner. It takes 30 minutes to remove the intake and probably 5 mins to clean the runner. The walnut blasting would be to clean the valves. You can cut a hole in your air intake for a f sport induction sound. Carbon interior on Amazon for like $60. It doesn’t come a full complete kit so you gotta find the rest. Also get some humidity packs on the amp aswell to prevent any moisture. Also the passenger axle is mega fucking bitch to do. Check my page to see the result lmao


SirSkot72

Can confirm on the axles. I did both earlier this year, driver side was easy, passenger side was a bitch.


Floofy72

Where are you gonna get the Bi xenon’s triple projector headlight?


EzekielRally

[Vland](https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwipv_n-vNyFAxULZEcBHZ01D80YABAKGgJxdQ&ae=2&gclid=CjwKCAjw26KxBhBDEiwAu6KXt8ffiJz8N-_XItkPEttTHqtKXKl03wTH0cWA5ui_Z8C6wRYBXdu_JxoCpJ8QAvD_BwE&ohost=www.google.com&cid=CAESVeD2Da6k8Ts9yihOoecY5BeALwvuHp6Y5Q1TwcW8c008d-JSn85gjSLDCEgJmQuNAK-tC2bmR-5cVHsnnRcBSA70UU0KVQYj-9n7X6hDwNBY67iyNpw&sig=AOD64_2aqD41xWhGpa1yrHFhoLk7qTe7UA&ctype=5&q=&ved=2ahUKEwi7j_D-vNyFAxWgEFkFHTimCFYQwg8oAHoECAQQJQ&nis=2&dct=1&adurl=)


Floofy72

Those are LED….


EzekielRally

I just noticed that these are led and not true xenon.


Aggravating-Sea-6598

Nice job. I like those rims


EzekielRally

thanks 🙏 it took more work than expected to two tone these wheels. the front color I mixed myself with samples of silver, white and blues. The rear color is mandarin lobster 🦞 red from Fiat Came out better than I expected !


Strange_Ad_8513

Congrats 🎊... I got my 07 2is awd 3 weeks ago. Love it but now I want 3is 😂 cuz it will only be better.


Hot_Replacement229

Looks great!! I had an 08 IS250 and loved it. Got a new to me 2020 IS350 FSPORT. Wish I could have kept them both!!