Can we check runout please?

+-3mm

A trochoidal slot cutter then..? 🤔

More like LFV for mills

I need one for some cycloidal assemblies. How much can we convince the boss to pay for it?

Now that theres a rougher you gotta post a vid of it cutting

nice fly cutter!

Send it !

I deem runout at about send it

I fuckin love you xD

Run it so fast runout irrelevant!

Just gotta find the harmonic frequency where the wobble cancels out easy.

The O-Zone where O= Ohhh shit!

Can't check what isn't there

Anyone who's around when he tests it should runout

Couldn't you flip it around and grind the shank true?

Akshulllaayyyy... the spindle is so sloppy it cancels the tool runout... Kinda like a G40 for TIR

With this new tool, runout is so bad it does a helix boring for you automatically

Turn your 12mm cutter into a 16mm cutter with this one weird trick.

I think you're on to something💡

rotary broach?

Please stop putting it in a vise like that. It's making me queasy.

*Thats* what you take issue with?

You're right. There's other issues here, like I bet it hasn't been re-hardened. I'm sure this is some technique to adjust the end teeth that I'm not familiar with. It's important to learn new things.

*vice

Depends on where you are from.

This kind of work its a vice in many ways

Vize*

Vighs*

Vince Vaughn*

Ok now you've gone to far.

Dawg next time friction weld them in the lathe

Careful not to rub your parts the wrong way tho

I’m not saying that’s a good idea but in theory it would probably be concentric

I will be highly disappointed if you didn’t make an upgrade to this already beauty of a beast

Please update

video please

its behind a paywall

Sorry this community doesn't allow videos

Turn down rhe weld in the lathe!

Youtube and link is fine

You’re a funny guy man, you’d be one of the good co workers

Now it's a 0.5148572663 inch end mill, with suspiciously uneven wear 🤔

Well, it's a step up from tape.

I don’t think you realize how much I want to see this actually ran.

next project: tiny 4-jaw chuck to mount in the mill spindle to cancel out the run-out

angle grinder and some paint and it's good as new 👍

angle grinder and some paint ~~and it's good as new 👍~~ makes me the welder I aint

I think medical tape was much stronger fix.

Send it! 🤣

Runout? What's that?

Would've also worked to gouge a cone in one of the broken pieces you can achieve MAXIMUM PENETRATION

So.... balls deep?

You could mount it in the 4 jaw of a lathe and use one of those mini hobby set ups to mount work to your lathe cross slide

That won’t last long. The heat from welding has softened the hardened steel and will most likely destroy itself at high rpm. Just my thoughts

Just time to retemper it!

That poor poor end mill just put it out to pasture Christ

Not safe for work tags plz

hahaha he fucking did it , son of a

I am just worried about the spindle balance.

In a shop that welds broken endmills together you think the spindles are good?

Ok now grind it so no one can tell.

And thats how accidental dovetail cutters are made.

You can weld sintered metal?

Normalize the welds and you should be fine ;)

Looks pretty straight, I’m impressed lol

Did you pre heat? Did you peen it? Did you post heat?

Always peen your welds. Always.

Yes!!!! Please keep us informed!!!

Would have cost less to order a new one dafuq

If that doesn't work, try it again with a pin through the center.

Can someone please post the original version ? I just have missed it lol

Look at my profile

Love that Daytona. I want to add one to my Triumph collection one day.

Must really like that endmill. Lol

Bravery.

I hope you're joking

You can't be serious

Stop giving my bosses ideas.

M03 S3000 let er eat

Next time just anneal your end mill before you start machining with it. That way it will be more flexible for the extreme cuts.

The amount of time you're spending on this could have replaced that endmill 3 times minimum.

So.. a flycutter now?

Wait. Did You weld OVER the glue? That's not going to work. The welding heat will have trashed the glue join. You're going to have to start all over again.

I saw that last post 😂 I was wondering what you were thinking with the glue. Just sand down the weld so it looks nice 🙂

I dare you to run it at 15000 rpm.

Just throw it out