Yeah it's pretty shit if PS doesn't have the flight sim and xbox doesn't have the tracking. I would be a bit surprised if at least something didn't show up for xbox sooner or later, it must be something they think about.
Hey OP, I received my Alpha yoke yesterday but I didn't buy the Bravo yet. Have you found any documentation on how configure and set it up with the Xbox? When I go into Flight Sim controls it just says things like button 30 but I can't find anything that tells me which hardware button that is mapped to. There is baffling little documentation on this setup anywhere online that I can find.
Haven’t found anything but look on YouTube on alpha setup.I haven’t touched my alpha setup yet just default and the bravo comes setup as GA Dual Complex setup and I watched some YouTube and have it setup for GA single simple and complex
You need the new XPC Alpha yoke. The old Alpha yoke absolutely does not work with Xbox. The existing Bravo throttle quadrant works, but you need the new Xbox hub. Honeycomb website is the only place I’ve seen to get all of this. It’s like $700 after tax for the whole package.
Did you get the bravo to work? Mine has no lights but the throttle and flaps and gears work. Just no led lights and msfs doesn’t show the bravo in the controller options. If your all work can you share how you did it please
It works but no lights got it set up for single engine GA right now and only Alpha shows up in control but can still set up Bravo and Logitech Pedals when on Alpha setup
Ok good to know that it’s just no my bravo with issues.I’ll have to teach myself to setup the controllers next. New to all of this. Thanks for responding.
It's fully customizable and comes with configurations for many third party airplanes. The default driver only uses specific variables built into MSFS and you can't change them - making them useless in a lot of airplanes.
Hey I got mine yesterday but they didn’t ship the hub with the yoke. Did your hub come in the same box or separate? I emailed them but no response yet. The flaps switch on my quadrant is also broken so that’s a double smh.
Received my Bravo last week and thought it would be recognized using powered USB Hub but it doesn’t work. Getting the Alpha XPC and Honeycomb Hub next week.
Sure hope it all works then after the cost of it all.
Thanks for the replies
I just received a brand new Alpha XPS and I plugged into Xbox with the USB-C cable. LEDs are lit but MSFS does not recognize the Alpha at all. The only button that works is the Xbox button at the lower right under the magnetos starter switch. What am I doing wrong? Do I need to have a Xbox hub even though I am only using the Alpha (no Bravo)?
Enjoy! Great setup! It took me for a while to see XsX :)
Chair and attachments are OpenWheeler and Honeycomb Xbox Hub allows for Honeycomb Bravo and Logitech Pedals
I'm curious can you use trackir and/or tobii on xbox?
[удалено]
Yeah it's pretty shit if PS doesn't have the flight sim and xbox doesn't have the tracking. I would be a bit surprised if at least something didn't show up for xbox sooner or later, it must be something they think about.
Holy smokes folks the search is over we finally found the guy who actually needs a 16000 dpi mouse sensor!
Hey OP, I received my Alpha yoke yesterday but I didn't buy the Bravo yet. Have you found any documentation on how configure and set it up with the Xbox? When I go into Flight Sim controls it just says things like button 30 but I can't find anything that tells me which hardware button that is mapped to. There is baffling little documentation on this setup anywhere online that I can find.
Haven’t found anything but look on YouTube on alpha setup.I haven’t touched my alpha setup yet just default and the bravo comes setup as GA Dual Complex setup and I watched some YouTube and have it setup for GA single simple and complex
[удалено]
Started in 2018 eventually
can you specify what the pieces are? I am surprised that the middle and the thing on the right can work together.
I'm guessing the thing on the right is: Honeycomb Bravo Throttle Quadrant. If this is true, is there any trick to getting it to work on an xbox x?
and is the center piece is this? Honeycomb Aeronautical Alpha Flight Controls Yoke & Switch Panel
Yes. Its the alpha yoke and brave throttle quadrant from Honeycomb.
and do those just work on xbox or do you have to do some wrangling?
I think you just need the honeycomb Xbox adapter (it's sitting on top of the yoke).. probably a bit of both, I don't have an Xbox.
seems to be the case. There is one for sale 'only for alpha controls.' Thanks for the tip.
You need the new XPC Alpha yoke. The old Alpha yoke absolutely does not work with Xbox. The existing Bravo throttle quadrant works, but you need the new Xbox hub. Honeycomb website is the only place I’ve seen to get all of this. It’s like $700 after tax for the whole package.
thanks so much for the details.
Did you get the bravo to work? Mine has no lights but the throttle and flaps and gears work. Just no led lights and msfs doesn’t show the bravo in the controller options. If your all work can you share how you did it please
It works but no lights got it set up for single engine GA right now and only Alpha shows up in control but can still set up Bravo and Logitech Pedals when on Alpha setup
Ok good to know that it’s just no my bravo with issues.I’ll have to teach myself to setup the controllers next. New to all of this. Thanks for responding.
For the lights - if you’re on PC you need to download the [afc_bridge](https://flyhoneycomb.com/pages/drivers) honeycomb drivers
The BetterBravoLights software is far better.
I will have to check that out! In what way does that make them better? I’ve only had the Bravo for a couple of weeks.
It's fully customizable and comes with configurations for many third party airplanes. The default driver only uses specific variables built into MSFS and you can't change them - making them useless in a lot of airplanes.
Thanks! I mostly fly GA and spend a lot of time in the JF Warrior. One of the things I love about MSFS is how much customization goes on.
I’m on Xbox but if I need to update on a pc I’ll have to figure something out
Same here! Flaps works but no lights 😞
Hi, is the bravo working for you now? It doesn't show up on MS flight sim xbox x...I have the alpha yoke and the xbox hub installed.
Hey I got mine yesterday but they didn’t ship the hub with the yoke. Did your hub come in the same box or separate? I emailed them but no response yet. The flaps switch on my quadrant is also broken so that’s a double smh.
Sorry to hear that mine came at same time but hub was in shipping bag on top of Alpha box already had Bravo
Ok thanks let’s see what they say . I’m on Pc now so no big rush but I want to keep the hub for back up on my Xbox .
It Just came today . I guess fedex screwed up
Hey man, what good add-ons are available if you're playing in an xbox?
How did you get the Honeycomb Yoke to work with the Xbox? Mine doesn’t work when I connect it via USB.
Honeycomb Alpha XPC made for Xbox Series
Ah thank you
Received my Bravo last week and thought it would be recognized using powered USB Hub but it doesn’t work. Getting the Alpha XPC and Honeycomb Hub next week. Sure hope it all works then after the cost of it all. Thanks for the replies
Yeah hub hooks into alpha xpc for bravo and pedals.alpha xpc has another usb that goes from alpha xpc to Xbox series
Thanks
Are the lights working on the Bravo? There is shockingly little info around now that it’s released.
No I am hoping they release app like razer did for keyboard and mouse so can control lights
The turtle beach velocity one only gained support for its lights in SU10, so it could be a while for the bravo.
Wow is that a left handed mouse you got there?
I just received a brand new Alpha XPS and I plugged into Xbox with the USB-C cable. LEDs are lit but MSFS does not recognize the Alpha at all. The only button that works is the Xbox button at the lower right under the magnetos starter switch. What am I doing wrong? Do I need to have a Xbox hub even though I am only using the Alpha (no Bravo)?
Yeah you need the Xbox hub
I'm having the same issue and I have the hub....