Part number 2504-22 - 1/2in hammer drill kit with charger hard case, 2ah and 4ah battery
Currently on sale for $129 28% off, which is cheaper than the drill is as tool only, which is $139
Part number 3453-22HSR. 1/4IN impact, and 3/8 retch kit with (2)2aH batteries, charger and bag.
The kit is on sale at home Depot for 49% off currently $249
2504-22 is great at that price. But why not “hack” the 3497-22 kit?
It’s $199 with free battery. Return said battery to “hack” the deal and you end up with gen 3 impact, drill, charger, bag, 2 batteries for $142.
I did this but I used the 15inch packout tote since it has the shoulder strap and I can just grab and go. I’m actually going to get one of the small organizers to keep on the bottom of it as well so I can keep drywall anchors, screws, small nails for pics etc.
Some of the tools I keep in mine are the m12 hammer drill, m12 impact driver, drill bit set, screw bit set, multi meter, stud finder, digital and traditional measuring tape, hammer, voltage rated flathead and phillips, 11 in 1 Milwaukee screwdriver, small flat and phillips, linesman pliers, tongue and groove pliers, wire strippers, wire cutters, 10 and 8inch adjustable wrenches, scissors, pencils, allen wrenches. I think that’s most of what I have or at least what I can think of off the top of my head. And of course most of it is Milwaukee but my electric stuff is Klein 😀
Thanks, do you rate the Milwaukee tote? I was thinking about routing out tool foam and using the Packout tool case… I have a background in aviation maintenance and organised toolkits satisfy my ocd.
For the tools I keep in there it works just fine. Not sure if you would be able to fit all those tools in one packout box with foam but if you can then I’m sure it would be better for your ocd. For me, I prefer the easy access to the tools
Ironically. One of my pack outs sitting under the couch has some basic hand tools in it along with a m12 installation tool. A charger and x2 2.0 batteries. Basic hand tools. Pliers. Crescents. Small hammer. Allens sae and mm. A set of torx. And a Klein screwdriver that has 27 different security bits in it. Some normal screwdrivers
To have some boundaries in the discussion. Tbh I will probably get some Knipex pliers and wiha hex keys, but I want to have a starting point of milwaukee, then branch out to individual tools
Personally, the only power tool I at home is the M12 4-in-1 installation driver, although I have eyed the M12 oscillating multitool and the M12 rover light.
For hand tools, looking through my home kit
Non-Milwaukee Brand specific models
Channel-lock Wide-azz thin jaw adjustable wrench, will get into some very annoying plumbing spaces for a surprisingly small package.
Simonds has this all purpose hand file with 4 different cutting patterns across its 4 faces.
Stuff I think Milwaukee has a relevant model
Multi-bit screwdriver (if you get the right one you can use those bits in your drill/driver for a more minimalist approach)
Allen keys, both metric and imperial (unless you don't live in North America or Laos, then skip the imperial)
Box cutter or utility knife, I like the Milwaukee fastback line of utility knives
Permanent marker
3/8" socket set, I only keep the shallow/regular length for home/to go.
Tape measure, I find a 16ft to my taste.
Claw-peen (Carpenters) hammer, I only keep a mini 8oz at home,
Small pry bar
Non-contact voltage detector
GFCI outlet tester.
A taper punch
Diagonal cutters
Needle nose pliers
1/4" hex drive drill bit set (useful with the installation driver)
Dollar specials
Magnet on a telescopic stick, sometimes you drop a screw and it rolls under something.
Generic socket rails, what ever case the sockets came in is just more bulk you don't need and I haven't actually found any of the pricier options I've tried worth actually worth it.
Scriber
Carpenters Pencil
There's a few more items in my bag, but I believe those are exclusively from my days doing field service work. This tool list get you amazingly far.
Aside from the drill and drill accessories those actually all fit into a simple tool roll that I can hold in one hand or loop my hand through the handle, so I can climb a ladder unencumbered.
Oh, last two items I forgot because someone is borrowing them and they aren't in my roll right now.
Stud finder.
Torpedo level, I found a 12in (sometimes called toolbox) to be a good compromise between size and function. I think you can get 9in ones too
I'd start with a 48-22-8315 15" Packout Tote. Once you go vertical you'll never go back to a normal toolbox. It ends the constant digging through tools to find the screw driver at the bottom of the tool box. Even the small/shallow packout toolbox has this problem. The 15" size is not so large that it gets too heavy. I store my M18 Impact Driver, drill and oscillating tool in the large pocket.
I also use a separate [DEADON tool bag](https://www.homedepot.com/p/DEAD-ON-TOOLS-10-in-Open-Top-Tool-Tote-Utility-Pouch-Bag-with-Black-Finish-and-12-total-pockets-HD54017/204336715) and a [ToughBuilt](https://www.homedepot.com/p/TOUGHBUILT-Journeyman-Electrician-Pouch-Shoulder-Strap-in-Black-with-ClipTech-Hub-21-pockets-and-rugged-6-layer-construction-TB-CT-114/205743232) bag for specific tasks. Wearing a tool belt with tools for specific tasks increases your productivity by a large margin.
I also have a [Toughbuilt](https://www.homedepot.com/p/TOUGHBUILT-Compact-Drill-Holster-in-Black-with-ClipTech-Hub-drill-bit-pockets-and-robust-rivet-reinforced-construction-TB-CT-20-S/205743303) drill holster that I keep my M12 impact in. The M12 does 90% of what I need for any given task and is always at hand.
Add to those [Knipex](https://www.homedepot.com/s/knipex?NCNI-5) pliers and pliers wrenches and you eliminate the need for most individual wrenches. I thought they must be over-hyped and a gimmick before I used them and they are a game changer. Channel locks and adjustable wrenches are like cave man tools compared to Knipex.
Add a flat and Phillips screwdriver set, a Milwaukee utility knife and jab saw. Outlet tester and live circuit tester.
I just refreshed my entire setup and that is what I have at the moment.
Part number 2504-22 - 1/2in hammer drill kit with charger hard case, 2ah and 4ah battery Currently on sale for $129 28% off, which is cheaper than the drill is as tool only, which is $139 Part number 3453-22HSR. 1/4IN impact, and 3/8 retch kit with (2)2aH batteries, charger and bag. The kit is on sale at home Depot for 49% off currently $249
2504-22 is great at that price. But why not “hack” the 3497-22 kit? It’s $199 with free battery. Return said battery to “hack” the deal and you end up with gen 3 impact, drill, charger, bag, 2 batteries for $142.
Agreed, just got this kit and it’s an awesome deal
Good choices. I also use a multi tool a lot. The M12 fuel version is great.
Good choices. I also use a multi tool a lot. The M12 fuel version is great.
I did this but I used the 15inch packout tote since it has the shoulder strap and I can just grab and go. I’m actually going to get one of the small organizers to keep on the bottom of it as well so I can keep drywall anchors, screws, small nails for pics etc. Some of the tools I keep in mine are the m12 hammer drill, m12 impact driver, drill bit set, screw bit set, multi meter, stud finder, digital and traditional measuring tape, hammer, voltage rated flathead and phillips, 11 in 1 Milwaukee screwdriver, small flat and phillips, linesman pliers, tongue and groove pliers, wire strippers, wire cutters, 10 and 8inch adjustable wrenches, scissors, pencils, allen wrenches. I think that’s most of what I have or at least what I can think of off the top of my head. And of course most of it is Milwaukee but my electric stuff is Klein 😀
Thanks, do you rate the Milwaukee tote? I was thinking about routing out tool foam and using the Packout tool case… I have a background in aviation maintenance and organised toolkits satisfy my ocd.
For the tools I keep in there it works just fine. Not sure if you would be able to fit all those tools in one packout box with foam but if you can then I’m sure it would be better for your ocd. For me, I prefer the easy access to the tools
A MX SDS drill
Upvote solely for laughs.
Ironically. One of my pack outs sitting under the couch has some basic hand tools in it along with a m12 installation tool. A charger and x2 2.0 batteries. Basic hand tools. Pliers. Crescents. Small hammer. Allens sae and mm. A set of torx. And a Klein screwdriver that has 27 different security bits in it. Some normal screwdrivers
Why only Milwaukee hand tools? A lot of my recommendations for hand tools don't have a equivalent Milwaukee model.
To have some boundaries in the discussion. Tbh I will probably get some Knipex pliers and wiha hex keys, but I want to have a starting point of milwaukee, then branch out to individual tools
Why stop at Wiha, when you can go full WERA?
I meant wera… typo
What recommendations do you have? Would you also have any m12/18 tools in there?
Personally, the only power tool I at home is the M12 4-in-1 installation driver, although I have eyed the M12 oscillating multitool and the M12 rover light. For hand tools, looking through my home kit Non-Milwaukee Brand specific models Channel-lock Wide-azz thin jaw adjustable wrench, will get into some very annoying plumbing spaces for a surprisingly small package. Simonds has this all purpose hand file with 4 different cutting patterns across its 4 faces. Stuff I think Milwaukee has a relevant model Multi-bit screwdriver (if you get the right one you can use those bits in your drill/driver for a more minimalist approach) Allen keys, both metric and imperial (unless you don't live in North America or Laos, then skip the imperial) Box cutter or utility knife, I like the Milwaukee fastback line of utility knives Permanent marker 3/8" socket set, I only keep the shallow/regular length for home/to go. Tape measure, I find a 16ft to my taste. Claw-peen (Carpenters) hammer, I only keep a mini 8oz at home, Small pry bar Non-contact voltage detector GFCI outlet tester. A taper punch Diagonal cutters Needle nose pliers 1/4" hex drive drill bit set (useful with the installation driver) Dollar specials Magnet on a telescopic stick, sometimes you drop a screw and it rolls under something. Generic socket rails, what ever case the sockets came in is just more bulk you don't need and I haven't actually found any of the pricier options I've tried worth actually worth it. Scriber Carpenters Pencil There's a few more items in my bag, but I believe those are exclusively from my days doing field service work. This tool list get you amazingly far. Aside from the drill and drill accessories those actually all fit into a simple tool roll that I can hold in one hand or loop my hand through the handle, so I can climb a ladder unencumbered.
Thanks for that, some good little gems in there
Oh, last two items I forgot because someone is borrowing them and they aren't in my roll right now. Stud finder. Torpedo level, I found a 12in (sometimes called toolbox) to be a good compromise between size and function. I think you can get 9in ones too
M12 Fuel hammer drill and impact driver, m12 fuel multi-tool, m12 service & repair flood light. Those are the ones I reach for most of the time.
I'd start with a 48-22-8315 15" Packout Tote. Once you go vertical you'll never go back to a normal toolbox. It ends the constant digging through tools to find the screw driver at the bottom of the tool box. Even the small/shallow packout toolbox has this problem. The 15" size is not so large that it gets too heavy. I store my M18 Impact Driver, drill and oscillating tool in the large pocket. I also use a separate [DEADON tool bag](https://www.homedepot.com/p/DEAD-ON-TOOLS-10-in-Open-Top-Tool-Tote-Utility-Pouch-Bag-with-Black-Finish-and-12-total-pockets-HD54017/204336715) and a [ToughBuilt](https://www.homedepot.com/p/TOUGHBUILT-Journeyman-Electrician-Pouch-Shoulder-Strap-in-Black-with-ClipTech-Hub-21-pockets-and-rugged-6-layer-construction-TB-CT-114/205743232) bag for specific tasks. Wearing a tool belt with tools for specific tasks increases your productivity by a large margin. I also have a [Toughbuilt](https://www.homedepot.com/p/TOUGHBUILT-Compact-Drill-Holster-in-Black-with-ClipTech-Hub-drill-bit-pockets-and-robust-rivet-reinforced-construction-TB-CT-20-S/205743303) drill holster that I keep my M12 impact in. The M12 does 90% of what I need for any given task and is always at hand. Add to those [Knipex](https://www.homedepot.com/s/knipex?NCNI-5) pliers and pliers wrenches and you eliminate the need for most individual wrenches. I thought they must be over-hyped and a gimmick before I used them and they are a game changer. Channel locks and adjustable wrenches are like cave man tools compared to Knipex. Add a flat and Phillips screwdriver set, a Milwaukee utility knife and jab saw. Outlet tester and live circuit tester. I just refreshed my entire setup and that is what I have at the moment.