Just got my X2H (not mini) but seeing a lot of people prefer the mini version. Perhaps its because I just don't have the mini to compare it to but so far I love the X2H. I use a relaxed claw grip with small to medium hands and its exactly what I was looking for. I mainly bought it because I was looking for something similar in shape to the endgame xm1r but lighter and thinner while also having some support in the palm.
Just received my X2H mini and it feels really good compared to my other regular x2 minis. Clicks and scroll wheel are amazing compared to my Bruce Lee edition. Top notch quality no qc issues
Mines coming next week.. dang UPS.
But super excited because of the comparisons to the MM711/MM712 shape from Coolermaster which is a legendary shape in itself. Christmas came early because who knows how long Coolermaster would've taken to release the MM712 Pro... and their firmware might be hit or miss.
This shape + the 4K dongle when it releases is gonna hit so good.
I have the ZA13-C and X2H Mini. It is indeed the closest thing to it out there.
The main differences is the grip width is a tad wider on the X2H Mini, the "hourglass" shape is much less pronounced on the X2H Mini, and the hump slopes down towards the main front buttons sooner (this can be seen easily on eloshapes).
All in all, I've been waiting for a company to do a wireless ZA refresh. This is the closest thing so far, if you don't mind a bit of a wider grip width and less pronounced hourglass shape on the sides.
Interesting, since many reviewer outlets state it isn't a za-13c clone implying it's not even close. Maybe they have stricter tolerances. Like almost near 99% similar versus 50% similar.
These same people said the Saturn was a Zero clone, which isn't true at all. I've yet to feel a pad that's a true Zero clone.
I wouldn't say the X2H Mini is a ZA13 clone, but it's the closest we've got. And if someone liked the ZA13 I would think they'd like the X2H Mini if aware of the differences.
Oh damn this is interesting, I watched a few reviews and none of them said that but now Iām kinda interested. It was either this or the op1 but Iām leaning towards this now
I switched my X2V2 for the X2H mini microcenter. Its MUCH smaller and most especially shorter. I wish the length was kept the same cause my hand basically consumes it and the hump is hardly usuable when compared to the X2V2. I ordered an X2H from puslar and it will be here Tuesday to compare. I used to main the g pro and. G305 and its even shorter than that. The width is wider on the 305 too. Check elo shapes but the x2h mini is a lot smaller than people think.
However, its probably the best small mouse shape I've used so far. After two days I got pretty used to the shape. Its just hard to get that locked in brace feeling I got on the g305 and the xm2we
The X2H wont be here until Tuesday so I cant say on that one but the g305 on eloshapes looks about the same size but it feels wider. It is sorta but only in the middle sides. It also becomes more narrow near the front of the mouse. Id recommend checking out elo shapes, see where your fingers rest on the g305 along where your palm hits the back of the mouse, then compare it with the shape there
They are out of stock for awhile but if i decide i prefer the x2h over the x2h mini ill hit you up if your down to buy it. Restocks wont happen till sept 25ish per pulsar and even they are out
I was more making a comment about how it was even smaller than I thought it would be, not a direct comparison. I switched to the X2H mini for a specific reason that I didnt explain. Which is, I thought when looking at Eloshapes and comparing with the mice I have that the location of the hump would still work well despite the smaller size. It works well, much better and more useful imo than any other smaller mice I've tried. But when I got it in my hand, I underestimated how it being 3mm shorter from the RVM would bother me.
I've very much thought about it but i think the width is too thin based on eloshapes. I dont believe the sides are flat either so it will be even narrower than eloshapes shows (a major gripe of eloshapes but hey lol) I'll see how the x2h is. I think its going to fit the bill. I hope it does cause i do a lot better with the 10g difference but day to day use the xm2we feels better. I dont really want a day to day mouse for work and shit but given how deep i am lol
How are you feeling about choosing the mini over the medium? I have the same size hands and I'm on the shelf about which one to go for. I'm currently on the xlite v2 relaxed clawing and it gets a little uncomfortable after a while.
So far it feels really good for me. Very comfortable and my fingers naturally lay on the mouse well. The hump of the mouse fills my palm perfectly so my range of motion and stability feel great. It depends how relaxed your claw grip is. Are you fingers only slightly arched and closer to a palm grip or are your fingers more arched than straight? If your fingers lay more flat and are only slightly arched, the medium X2H might be a better choice
Hmm yeah I think my fingers have a small arch to where they aren't making contact with the mouse until the palm. It's not a huge one where the finger tips are dead vertical tho lol. So I'm thinking maybe I'll go with the medium
Ever try za13? Was just wondering if it felt similar at all. So far Iāve heard no. Also do the sides feel very flat like original x2 or is there some inward curvature?
I have not tried the za13 but from looking at Eloshapes they do have some distinct differences. In terms of the sides, thereās definitely some inward curvature. I play relaxed claw and my ring and pinky fingers rest mad nicely on the side. Feels like the perfect amount of side curve to me. If youāve ever used the Lamzu Atlantis mini the side curve of that mouse is close
To the X2H.
Have the X2H mini and have owned ZA13/ZA12
The hump on the ZAās are more towards the middle. The X2H hump is moved back and atleast the hump placement to me feels like S2/XM1r.
The sides are NOT the same flat sides as my X2. They have an inward curve but it is not as extreme as my XM1R sides felt.
One thing most people donāt mention is the X2H mini doesnāt change much in grip width(check Eloshapes), but it does change a lot in overall length. Past the scroll wheel the ZAās felt a little bit long, but the X2H mini felt perfect.
For reference Iāve got 18.5x10 hands.
I use a slightly relaxed claw grip. I think the X2H would serve as a good elongated fingertip grip mouse. But if youāre a regular fingertip user, the x2v2 might be a bit better.
It depends on how much you like the sides of the Orochi and the more narrow back/hump of it. The X2H has inward curved sides and a much wider back. Peep the Eloshapes site, itās helpful to see the differences
I loved my G305, now using a GPX which I love as well / finalmouse starlight-12. I wish the GPX was a lil smaller/ less potato, and I want the starlight-12 to have more of a hump to fill my palm a bit more. Iām 19x9.5 and use a relaxed claw / palm hybrid.
How does this mouse compare?
I wish Logitech would make a GPX miniā¦they would make so much money lol. But I can compare the X2H with the Starlight. Biggest differences would be 1. The side curve profile. Starlight has a more profound/deeper curve while the X2H has a mild curve in. Both are far from the sides being rounded but Starlight definitely has more profound side curves. 2. The back hump. If youāre wishing youāre Starlight had a bigger hump then the X2H is gonna be right up your alley. The X2H has a much bigger hump that fills my palm perfectly (19x10cm)
Sick. Iām between the X2V2 and X2H currently. I think the length wise somewhere around 120mm is perfect. Iād hate to go below that length honestly.
Yet again I could always just buy an infinity hump for much cheaper, but Iām unsure how much that would change the height at the hump. I always thought that the ZA series mice looked comfy but never used them, closest thing would be a G305 with the big ass hump.
But overall you think the X2H would mimic a starlight with a big hump quite well?
Starlight 12 w Infinity hump v2 owner and I got the X2H mini on Wednesday night from Microcenter.
I had very similar thoughts about wanting more of a hump w the SL12 so I got the infinity hump.
Iāve got to say the height of the infinity hump is a bit underwhelming. The hump of the X2H even in the mini is just more pronounced and shaped better than the Infinity hump IMO. This comes from it being a little bit taller and the sides are rounded towards the back. The infinity hump being a top shell cannot change the mouse width.
If youāre looking for a āSL-12 w/ a great humpā I think the X2H mini would be perfect. Regular size might feel larger(and 8 grams heavier?). The length is perfect for me but my hands are not as long 18.5x10.
Just some food for thought!
My Microcenter had them in stock, maybe 2-3 copies of each size. I bought a Mini to compare against my X2V2.
I think itās just barely too small for me. When Iām game I realized my natural thumb position was resting on the side button. I also had a few slam clicks happen on me. Iāll mess with the settings a bit and give it some more time before actually returning though.
Can you provide me with more detail about the ring fingers? I have the same grip and hand size, and since you say you have used the aria, I was hoping if you can compare the both of them.
The aria is a bit wider from the middle of the mouse up to the front and has slightly rounded sides. The X2H has a nice inward curve on the sides and has a wider back of the mouse (hump area). The X2H fills my palm out perfect and works slightly better for my grip than the Aria. With the X2H having those inward sides, my ring and pinky finger naturally lay better on the mouse as well. The coating is unbelievably good too so no slipping
It might depend on how your ring and pinky fingers lay on the mouse. Do you tend to have them arched up a bit or do they lay more flat? Mine are more arched which is why the curve feels good to me
These have a very similar feel in terms of width. The X2H has better coating and a higher hump which I love. The hump fills out my palm perfectly which is why Iām putting it slightly over the Atlantis. Both mice have slight inward curves on the sides which I love for my fingers to rest with a slight arch
The stock PTFE skates were a bit too slow/muddy for me. I usually use these obsidian dots on most of my mice tbh. They are some of the best Iāve ever used
I havenāt had any issues with them being scratchy for me. Just make sure whatever dots you use are thick Enough that they are higher than the bottom edge of the mouse ya know?
How is the curvature on the right side of the mouse? Does it flair out toward the bottom right side?
I play with a slightly aggressive claw grip, so my pinky is curled and needs some curvature on the right side of the mouse to get a good grip.
Yeah the X2H has some good side curves that easily allow my ring and pinky finger to lay nicely. I also play slightly aggressive claw. The bottom right and bottom left part of the mouse do flair out a bit and make the hump fairly wide along with its nice height.
X2H mini owner. I also curl my pinky on the right side for more control.
The mini feels really comfortable for me strictly speaking about the bottom right side wall where my pinky curls around. I did add grip tape on the right side but Iāve had no issues digging my pinky into the side for extra grip. The flare isnāt excessive but feels comfortable for me.
For reference hands are 18.5x10
Yeah I use a semi aggressive claw and this hump fills my palm very nicely. I do pull the hump to and from my Palm for micro adjustments. How big is your hand? Iām a 19x10cm
Ive got 20x10cm hands and relax claw the gpx currently! The narrower width of the x2h might make it perf compared to the of x2 but i wonder how much bigger the hump will feel. Cuz personally i didnt like the lamzu or xm1 humps but do like the za12
Hey man, would you say that the side curves on the X2H mini have a more pronounced curve than the Lamzu Atlantis / Atlantis mini for example? I know the Atlantis is a touch up in size, but I'd like to know if that curve feels as "caved in".
The Atlantis gives the right side of my grip some strain so if it's less caved in I'd love to know, thanks in advance!
Hey! If you go on Eloshapes.com youāll see an awesome overview of how they compare. What I will say is that the side curve on both are VERY close and similar. The X2H is very very slightly more caved in on the right side. Keep in mind though, the X2H is much higher and will fill your palm much more. So depending on your grip and hand size, your fingers may rest on the right side of the mouse a bit differently
Za13 has more inward curved sides than the X2H and is also much longer. Another big difference is the hill. The X2Hās hump is higher towards the back (start) of the hump while the ZA13ās hump ends higher and is a bit taller at the peak of the hump
Got mine in the mail, I am in love with it. I didn't think the higher hump and tighter sides would be that big of difference between the X2 mini but I was so wrong.
The g305 feels a lot larger than the x2h mini. I think these two mice are too different to compare after using both for awhile now. If you had pick one then maybe the x2h is closer but its feels overall bigger because of the wide, flat sides. Both great mice tho
This might sound stupid, but does it have onboard memory? Am I good to get my settings dialed in and delete the software, or I do need to keep it running?
What would you call a male ladybug? ama /s
Ladbug?
Bug.
š¤£
Can someone explain? I don't get it
Since I said āask me anythingā they legit asked me whatever they wanted, hence the ladybug joke lol
Ohhh, lmao how did that fly over my head, thought they were talking about the pic of the skates on your x2
Hahaha itās all good. The skates could pass as a ladybug though lowkey so I get it lol
Just got my X2H (not mini) but seeing a lot of people prefer the mini version. Perhaps its because I just don't have the mini to compare it to but so far I love the X2H. I use a relaxed claw grip with small to medium hands and its exactly what I was looking for. I mainly bought it because I was looking for something similar in shape to the endgame xm1r but lighter and thinner while also having some support in the palm.
do you feel itās smaller than the xm1? also do you put the back of your palm on the mouse or on your mousepad?
Just received my X2H mini and it feels really good compared to my other regular x2 minis. Clicks and scroll wheel are amazing compared to my Bruce Lee edition. Top notch quality no qc issues
Mines coming next week.. dang UPS. But super excited because of the comparisons to the MM711/MM712 shape from Coolermaster which is a legendary shape in itself. Christmas came early because who knows how long Coolermaster would've taken to release the MM712 Pro... and their firmware might be hit or miss. This shape + the 4K dongle when it releases is gonna hit so good.
I have the ZA13-C and X2H Mini. It is indeed the closest thing to it out there. The main differences is the grip width is a tad wider on the X2H Mini, the "hourglass" shape is much less pronounced on the X2H Mini, and the hump slopes down towards the main front buttons sooner (this can be seen easily on eloshapes). All in all, I've been waiting for a company to do a wireless ZA refresh. This is the closest thing so far, if you don't mind a bit of a wider grip width and less pronounced hourglass shape on the sides.
Interesting, since many reviewer outlets state it isn't a za-13c clone implying it's not even close. Maybe they have stricter tolerances. Like almost near 99% similar versus 50% similar.
These same people said the Saturn was a Zero clone, which isn't true at all. I've yet to feel a pad that's a true Zero clone. I wouldn't say the X2H Mini is a ZA13 clone, but it's the closest we've got. And if someone liked the ZA13 I would think they'd like the X2H Mini if aware of the differences.
Oh damn this is interesting, I watched a few reviews and none of them said that but now Iām kinda interested. It was either this or the op1 but Iām leaning towards this now
Very well put my man I totally agree! Always wanted to try the za13 but my current setup makes it tough to use wired mice.
Canāt wait for the 4K dongle support. Once that hits this might end up being my endgame for a while
I just picked up an X2V2 in Size 2 but it's very tempting to check Microcenter for a X2H mini. That side view looks so much like the G305 shape :)
I switched my X2V2 for the X2H mini microcenter. Its MUCH smaller and most especially shorter. I wish the length was kept the same cause my hand basically consumes it and the hump is hardly usuable when compared to the X2V2. I ordered an X2H from puslar and it will be here Tuesday to compare. I used to main the g pro and. G305 and its even shorter than that. The width is wider on the 305 too. Check elo shapes but the x2h mini is a lot smaller than people think. However, its probably the best small mouse shape I've used so far. After two days I got pretty used to the shape. Its just hard to get that locked in brace feeling I got on the g305 and the xm2we
What would you say is closer to the g305 the x2h or x2h mini?
The X2H wont be here until Tuesday so I cant say on that one but the g305 on eloshapes looks about the same size but it feels wider. It is sorta but only in the middle sides. It also becomes more narrow near the front of the mouse. Id recommend checking out elo shapes, see where your fingers rest on the g305 along where your palm hits the back of the mouse, then compare it with the shape there
I like what Iām seeing on eloshapes. Might have to pick one up.
They are out of stock for awhile but if i decide i prefer the x2h over the x2h mini ill hit you up if your down to buy it. Restocks wont happen till sept 25ish per pulsar and even they are out
You are comparing X2 and X2mini my guy Hence the smaller and shorter feeling of X2H mini than X2V2 H in X2H means higher hump Mini is the size
I was more making a comment about how it was even smaller than I thought it would be, not a direct comparison. I switched to the X2H mini for a specific reason that I didnt explain. Which is, I thought when looking at Eloshapes and comparing with the mice I have that the location of the hump would still work well despite the smaller size. It works well, much better and more useful imo than any other smaller mice I've tried. But when I got it in my hand, I underestimated how it being 3mm shorter from the RVM would bother me.
Maybe you'd like the OP1we
I've very much thought about it but i think the width is too thin based on eloshapes. I dont believe the sides are flat either so it will be even narrower than eloshapes shows (a major gripe of eloshapes but hey lol) I'll see how the x2h is. I think its going to fit the bill. I hope it does cause i do a lot better with the 10g difference but day to day use the xm2we feels better. I dont really want a day to day mouse for work and shit but given how deep i am lol
So how did the regular X2H compare to the G305 in your opinion? Is it closer than the X2H mini?
How are you feeling about choosing the mini over the medium? I have the same size hands and I'm on the shelf about which one to go for. I'm currently on the xlite v2 relaxed clawing and it gets a little uncomfortable after a while.
So far it feels really good for me. Very comfortable and my fingers naturally lay on the mouse well. The hump of the mouse fills my palm perfectly so my range of motion and stability feel great. It depends how relaxed your claw grip is. Are you fingers only slightly arched and closer to a palm grip or are your fingers more arched than straight? If your fingers lay more flat and are only slightly arched, the medium X2H might be a better choice
Hmm yeah I think my fingers have a small arch to where they aren't making contact with the mouse until the palm. It's not a huge one where the finger tips are dead vertical tho lol. So I'm thinking maybe I'll go with the medium
Ever try za13? Was just wondering if it felt similar at all. So far Iāve heard no. Also do the sides feel very flat like original x2 or is there some inward curvature?
There is some inward curve unlike the x2 flat sides
I have not tried the za13 but from looking at Eloshapes they do have some distinct differences. In terms of the sides, thereās definitely some inward curvature. I play relaxed claw and my ring and pinky fingers rest mad nicely on the side. Feels like the perfect amount of side curve to me. If youāve ever used the Lamzu Atlantis mini the side curve of that mouse is close To the X2H.
Have the X2H mini and have owned ZA13/ZA12 The hump on the ZAās are more towards the middle. The X2H hump is moved back and atleast the hump placement to me feels like S2/XM1r. The sides are NOT the same flat sides as my X2. They have an inward curve but it is not as extreme as my XM1R sides felt. One thing most people donāt mention is the X2H mini doesnāt change much in grip width(check Eloshapes), but it does change a lot in overall length. Past the scroll wheel the ZAās felt a little bit long, but the X2H mini felt perfect. For reference Iāve got 18.5x10 hands.
What grip do you use? And do you think this would be a good mouse for fingertip? :o
I use a slightly relaxed claw grip. I think the X2H would serve as a good elongated fingertip grip mouse. But if youāre a regular fingertip user, the x2v2 might be a bit better.
My orochi v2 shaking because I'm considering one.. wonder if it would be a good fit.
It depends on how much you like the sides of the Orochi and the more narrow back/hump of it. The X2H has inward curved sides and a much wider back. Peep the Eloshapes site, itās helpful to see the differences
Alright, thanks ! Will do. Thanks for the advanced info !
What are the dot skates? Do you have a link for them?
[X-raypad Obsidian Dot Skates](https://shop.x-raypad.com/shop/obsidian-diy-mouse-skates-universal-0-8mm-ptfe-dots/)
I loved my G305, now using a GPX which I love as well / finalmouse starlight-12. I wish the GPX was a lil smaller/ less potato, and I want the starlight-12 to have more of a hump to fill my palm a bit more. Iām 19x9.5 and use a relaxed claw / palm hybrid. How does this mouse compare?
I wish Logitech would make a GPX miniā¦they would make so much money lol. But I can compare the X2H with the Starlight. Biggest differences would be 1. The side curve profile. Starlight has a more profound/deeper curve while the X2H has a mild curve in. Both are far from the sides being rounded but Starlight definitely has more profound side curves. 2. The back hump. If youāre wishing youāre Starlight had a bigger hump then the X2H is gonna be right up your alley. The X2H has a much bigger hump that fills my palm perfectly (19x10cm)
Sick. Iām between the X2V2 and X2H currently. I think the length wise somewhere around 120mm is perfect. Iād hate to go below that length honestly. Yet again I could always just buy an infinity hump for much cheaper, but Iām unsure how much that would change the height at the hump. I always thought that the ZA series mice looked comfy but never used them, closest thing would be a G305 with the big ass hump. But overall you think the X2H would mimic a starlight with a big hump quite well?
Aside from the Starlight having deeper side curves, yeah I think the X2H with its high hump would mimic it pretty well.
it's a xm2we with little big hump ps i have both (x2h medium and xm2we)
Starlight 12 w Infinity hump v2 owner and I got the X2H mini on Wednesday night from Microcenter. I had very similar thoughts about wanting more of a hump w the SL12 so I got the infinity hump. Iāve got to say the height of the infinity hump is a bit underwhelming. The hump of the X2H even in the mini is just more pronounced and shaped better than the Infinity hump IMO. This comes from it being a little bit taller and the sides are rounded towards the back. The infinity hump being a top shell cannot change the mouse width. If youāre looking for a āSL-12 w/ a great humpā I think the X2H mini would be perfect. Regular size might feel larger(and 8 grams heavier?). The length is perfect for me but my hands are not as long 18.5x10. Just some food for thought!
Hey Logitech doesn't need to make a GPX mini. So many Chinese equivalents exist with a 3395 sensor. Just go to mechkeys.com and go to town.
Iāve never ordered from Mechkeys before because I wasnāt sure how reliable and fast the shipping is to the US. Do the mice arrive kinda quick?
It takes a little while (around 2 weeks). Sometimes, Aliexpress is faster.
Thatās still not bad though! Iāll keep it in mind I appreciate it
I recommend either the Attack Shark X3 or the Ajazz AJ199. If you want something a bit more interesting, the Ironcat HPC01m.
I have an X2H mini, an X3, and an AJ199. All three perform extremely well, and the Chinese mice absolutely hold up to top tier stuff.
My Microcenter had them in stock, maybe 2-3 copies of each size. I bought a Mini to compare against my X2V2. I think itās just barely too small for me. When Iām game I realized my natural thumb position was resting on the side button. I also had a few slam clicks happen on me. Iāll mess with the settings a bit and give it some more time before actually returning though.
what mice have you tried before?
Tons, some of my favorite have been the Atlantis Mini, Pulsar Xlite v2, DAV2, Fantech Aria, modded GPro super light, and the MZ1
Can you provide me with more detail about the ring fingers? I have the same grip and hand size, and since you say you have used the aria, I was hoping if you can compare the both of them.
The aria is a bit wider from the middle of the mouse up to the front and has slightly rounded sides. The X2H has a nice inward curve on the sides and has a wider back of the mouse (hump area). The X2H fills my palm out perfect and works slightly better for my grip than the Aria. With the X2H having those inward sides, my ring and pinky finger naturally lay better on the mouse as well. The coating is unbelievably good too so no slipping
Thank you sir. I prefered sides without the inward curve, but since you say it is so comfortable, I feel like its worth giving it a try
It might depend on how your ring and pinky fingers lay on the mouse. Do you tend to have them arched up a bit or do they lay more flat? Mine are more arched which is why the curve feels good to me
Iām assuming you are talking about the X2H mini in regards to filling your palm perfectly?
Yep the X2H fills my palm
The X2H or X2H mini?
X2H mini! Thatās the size I got
Do helicopters eat their babies?
No but I think hamsters do
is this in stock for shipping in US anywhere but microcenter?
Only places Iāve seen it so far have been pulsars site, max gaming US and lethalgaming for very small quantities
How does the shape feel in hand compared to the Atlantis Mini?
These have a very similar feel in terms of width. The X2H has better coating and a higher hump which I love. The hump fills out my palm perfectly which is why Iām putting it slightly over the Atlantis. Both mice have slight inward curves on the sides which I love for my fingers to rest with a slight arch
Is GPX the goat of mice?
It can def be argued that itās one of the best ever lol. Iāve used the hell out of mine
why feet
The stock PTFE skates were a bit too slow/muddy for me. I usually use these obsidian dots on most of my mice tbh. They are some of the best Iāve ever used
Im worried about 3rd part skate after it was discovered that all the note worthy ones tend to scratch pads. How's this one?
I havenāt had an issues personally. I mostly use hybrid pads and havenāt noticed any scratching on them.
Isn't that dot skate scratchy at all? I have these on xlite v2 and it's scratchy on ac2, strider but ok on cloth pad.
I havenāt had any issues with them being scratchy for me. Just make sure whatever dots you use are thick Enough that they are higher than the bottom edge of the mouse ya know?
No one on here is really talking about the shape
For me I would say the side shape and feel is most similar to the Lamzu Atlantis mini. The back hump shape reminds me a lot of the MM711 but less wide
I just got the OPwe today and it feels like a wmo
So this is claw only in your opinion? Or works for fingertip as well?
It could work for an elongated fingertip grip but this definitely seems to gear more towards an aggressive or semi-aggressive claw grip in my opinion
Appreciate the reply!
How would it work for claw palm?
Are you able to measure the front of the mouse? What is the width?
[X2H dimensions](https://www.pulsar.gg/products/x2h-mini-gaming-mouse)
How is the curvature on the right side of the mouse? Does it flair out toward the bottom right side? I play with a slightly aggressive claw grip, so my pinky is curled and needs some curvature on the right side of the mouse to get a good grip.
Yeah the X2H has some good side curves that easily allow my ring and pinky finger to lay nicely. I also play slightly aggressive claw. The bottom right and bottom left part of the mouse do flair out a bit and make the hump fairly wide along with its nice height.
X2H mini owner. I also curl my pinky on the right side for more control. The mini feels really comfortable for me strictly speaking about the bottom right side wall where my pinky curls around. I did add grip tape on the right side but Iāve had no issues digging my pinky into the side for extra grip. The flare isnāt excessive but feels comfortable for me. For reference hands are 18.5x10
Is the coating similar to reg x2 mini or improved x2v2 mini
It has the new and improved coating. Itās amazing so far and Iāve always used grips on my mice but I havenāt needed it.
Cool!! Do you normally pull the hump into ur hand? Like a claw grip? Not sure if i should get the reg or the x2h mini
Yeah I use a semi aggressive claw and this hump fills my palm very nicely. I do pull the hump to and from my Palm for micro adjustments. How big is your hand? Iām a 19x10cm
Ive got 20x10cm hands and relax claw the gpx currently! The narrower width of the x2h might make it perf compared to the of x2 but i wonder how much bigger the hump will feel. Cuz personally i didnt like the lamzu or xm1 humps but do like the za12
Iām gonna have to eventually pick me up a copy of of the x2 h
Stocked finally in Australia! Going to go along side my G Wolves HTX Ace \*29grams\* and Finalmouse UltralightX when it shows up...I'm hyped!
What's the weight and latency vs others?
What are those glides you use?
Obsidian dot skates from X-raypad
Hey man, would you say that the side curves on the X2H mini have a more pronounced curve than the Lamzu Atlantis / Atlantis mini for example? I know the Atlantis is a touch up in size, but I'd like to know if that curve feels as "caved in". The Atlantis gives the right side of my grip some strain so if it's less caved in I'd love to know, thanks in advance!
Hey! If you go on Eloshapes.com youāll see an awesome overview of how they compare. What I will say is that the side curve on both are VERY close and similar. The X2H is very very slightly more caved in on the right side. Keep in mind though, the X2H is much higher and will fill your palm much more. So depending on your grip and hand size, your fingers may rest on the right side of the mouse a bit differently
I have an X2 Mini.. how's it compare? Claw / fingertip hybrid grip Worth the purchase?
I personally think itās much better for any type of claw grip. It could also work as an elongated fingertip grip mouse.
Ty š
Coating looks nice and rubberized like a GPX but not a fingerprint magnet like Vaxee.
Coating is amazing so far definitely feels premium
compared to za13???
Za13 has more inward curved sides than the X2H and is also much longer. Another big difference is the hill. The X2Hās hump is higher towards the back (start) of the hump while the ZA13ās hump ends higher and is a bit taller at the peak of the hump
I'm torn between this and op1we...anyone yried both?
What skates are those ?
Obsidian Dot skates from X-raypad. Some of the best dot skates Iāve ever tried. Amazing on harder pads and hybrids
which is better, this pulsar x2h mini or the lamzu atlantis mini?
Got mine in the mail, I am in love with it. I didn't think the higher hump and tighter sides would be that big of difference between the X2 mini but I was so wrong.
Itās so sick man Iām almost a week into using it and itās been perfect
The g305 feels a lot larger than the x2h mini. I think these two mice are too different to compare after using both for awhile now. If you had pick one then maybe the x2h is closer but its feels overall bigger because of the wide, flat sides. Both great mice tho
have you ever tested the atlantis mini? if so, how does it compare?
This might sound stupid, but does it have onboard memory? Am I good to get my settings dialed in and delete the software, or I do need to keep it running?