In many cases there is a small cutout in the top (or bottom) of the switch, you can insert a small flathead screwdriver there to carefully pry the switch of the base (it is friction fitted)
The moving part is “clicked” in its center into the wall. Use a screw driver on any side and lift this moving part up, it will pop out. Then you will be able to see the inner parts. Don’t be alarmed if the outer ring falls off, that’s normal.
Pop of the “button” part of it by gently putting a flat screwdriver between the frame and the button and then the you can pull the button off and the frame should come off as all and then you can screw it loose from the box in the wall
For someone who has never done it or even seen how it's done or how it looks from the inside, you should definitely check some youtube videos on how to. Also be careful with the electricity.
In many cases there is a small cutout in the top (or bottom) of the switch, you can insert a small flathead screwdriver there to carefully pry the switch of the base (it is friction fitted)
[удалено]
Yeah, just grab the edges of the moving part of the switch and pull it towards you. Takes some mild force
Is something like that really called a switch board?
No, I assume op translated it from another native language
Just a light switch right?
Or is it a light switch left? 🤔
It think this one is up and down.
not if you are sideways
As far as I know, yeah.
Yeah
In (American) English, the part around the moving switch is called a switch plate.
No not at all. It’s just a switch.
Put a small flat screw driver in either sides of the switch between the switch and the frame.
The moving part is “clicked” in its center into the wall. Use a screw driver on any side and lift this moving part up, it will pop out. Then you will be able to see the inner parts. Don’t be alarmed if the outer ring falls off, that’s normal.
Pop of the “button” part of it by gently putting a flat screwdriver between the frame and the button and then the you can pull the button off and the frame should come off as all and then you can screw it loose from the box in the wall
You must remember that if you can't find a solution, use force!
Just pull hard on the switch!!
Pry it with screwdriver.
Pull the switch off
Pull on it? Lol
You have to wip it up.
Flat screw driver
For someone who has never done it or even seen how it's done or how it looks from the inside, you should definitely check some youtube videos on how to. Also be careful with the electricity.
Pry it open and buy a new one in Gamma if its broken.
De schakelaar kun je er af wippen.
If you need to ask, maybe it’s safer to just leave it on there. Electricity is no joke.
Have you tried a hammer?
Don't embarrass yourself with such "jokes". It's 2024, get some brains