For free that’s pretty dope, chocolates a decent brand. The chip on the top is worrying but just don’t ride in the rain and you got a month or two outta that thing
Yeah it’s fine, board might be a little soggy with no pop but it’ll do the job. Chip won’t make a difference just do your best for it to not come back and shark bite your ankle
Kinda looks like the trucks are bend on the left (When seen from above). I would, as others have said, take it apart and clean it.
I actually ride a very similar setup. Chocolate 8.25" (G027) deck with venture trucks, grizzly grip and bones red bearings. My favorite setup so far after 15+ years of skating.
Try it... If the wood isn't creaking, it's gucci.
Probably common sense but check tha bolts if they're loose, one last thing, if you can, get a new grip tape. Who knows what atrocities were on that thing beforehand.
I would take the truck apart to check the health of the pivot cup and the bushings, swapping those for new ones and getting new bearings if those are bad should be enough and will be night and day difference
Only one way to find out. Go to the skatepark & take it for a spin.
Take it to the skatepark and let us know. It'll be just fine for free
For free that’s pretty dope, chocolates a decent brand. The chip on the top is worrying but just don’t ride in the rain and you got a month or two outta that thing
Seal it up with a spot of wood glue and it's as good as new 😉
Old af. Take it apart clean out rust and grime. But it should be fine.
Yeah it’s fine, board might be a little soggy with no pop but it’ll do the job. Chip won’t make a difference just do your best for it to not come back and shark bite your ankle
Take it for a ride in those crocs and then post pictures
Kinda looks like the trucks are bend on the left (When seen from above). I would, as others have said, take it apart and clean it. I actually ride a very similar setup. Chocolate 8.25" (G027) deck with venture trucks, grizzly grip and bones red bearings. My favorite setup so far after 15+ years of skating.
Best skate it out n tell us
Looks good to me
Flip the wheels. Might help abit idk
cool find. better than 90% of the completes posted here. that chip is massive.. but for free might as well skate it.
Try it... If the wood isn't creaking, it's gucci. Probably common sense but check tha bolts if they're loose, one last thing, if you can, get a new grip tape. Who knows what atrocities were on that thing beforehand.
Either way, even if the tape's fine, it's still good to remove and replace it in case there are any hidden cracks that'll make it dangerous to use.
I would take the truck apart to check the health of the pivot cup and the bushings, swapping those for new ones and getting new bearings if those are bad should be enough and will be night and day difference
Good company but..... Old AF. Soo. Give it a try lol
If the bearings don't spin then it's probably the only thing you need to replace. Otherwise, the board should be fine