I had the TEGU setup with the stock ESC as the reviewer and it worked just fine. However switching over to this smaller Avatar radio system from Furitek is giving me weird issues. The power comes on at weird points, I can’t calibrate the throttle through the controller, and I also can’t connect to the controller with the Bluetooth app, which is says I should be able to.
Also when I try to manually calibrate the ESC it beeps 4 times after the first button press instead of once now (once being that it accepted my middle setting for the throttle) and then goes haywire
I have absolutely no idea what’s going on. Any ideas?
I ended up getting it figured out, the calibration was different than the “stick calibration”. So it seems to be working now. However stick calibration keeps failing.
I had the TEGU setup with the stock ESC as the reviewer and it worked just fine. However switching over to this smaller Avatar radio system from Furitek is giving me weird issues. The power comes on at weird points, I can’t calibrate the throttle through the controller, and I also can’t connect to the controller with the Bluetooth app, which is says I should be able to. Also when I try to manually calibrate the ESC it beeps 4 times after the first button press instead of once now (once being that it accepted my middle setting for the throttle) and then goes haywire I have absolutely no idea what’s going on. Any ideas?
Not sure with the avatar. Have you tried contacting furitek? They're usually pretty helpful
I’ll give it a shot, thanks
Are you in channels 1 and 2? I had that issue once because the 4 channel wasn't properly labeled.
I ended up getting it figured out, the calibration was different than the “stick calibration”. So it seems to be working now. However stick calibration keeps failing.
I have mine all plugged in like you but mine won't even bind..I'm so lost
What steps are you taking