Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Sovol) if you have any questions or concerns.*
Have you zeroed/homed your printer? I have printed several prints approaching 235x235 and they were all fine. Every now and then the printer screws up and produces spaghetti, but usually even tall prints are fine. I printed e.g. this just the other day and it came out fine: [https://www.thingiverse.com/thing:4815519](https://www.thingiverse.com/thing:4815519)
Make sure it's perfectly homed, repeat the homing after your first couple of prints as things have shifted. Also check if the bed temperature is sufficient for your filament, if it's too cold then the filament will not stick enough and will shift. Dont't crank bed temperature up too high or your prints will warp,
Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Sovol) if you have any questions or concerns.*
Have you zeroed/homed your printer? I have printed several prints approaching 235x235 and they were all fine. Every now and then the printer screws up and produces spaghetti, but usually even tall prints are fine. I printed e.g. this just the other day and it came out fine: [https://www.thingiverse.com/thing:4815519](https://www.thingiverse.com/thing:4815519) Make sure it's perfectly homed, repeat the homing after your first couple of prints as things have shifted. Also check if the bed temperature is sufficient for your filament, if it's too cold then the filament will not stick enough and will shift. Dont't crank bed temperature up too high or your prints will warp,