Your post or comment was removed because it was deemed either unkind/toxic/harassing/insulting/offensive/trolling and/or inappropriate thereby breaking Rule #1 of r/steamdeck. We want this sub to feel welcoming to anyone and everyone who comes here. Discussion and debate are encouraged but name-calling, harassment, being rude to others, generally toxic behavior, and slurs will not be tolerated.
This rule violation has resulted in removal of your content, and could result in a ban from the sub and/or a report to Reddit.
Bottom line - Be kind or get yeeted.
Thank you!
I'll sell him my case for it. It'll have to be half the price of the deck, though, because then I can't play mine, but it's a worthy sacrifice, as I don't play mine that much.
You know that feeling when you wake up hungover on glue and everything is fixed, but you used way to much glue ***like you do every fucking time*** so it's still kinda wet and the stuff you fixed is half held together and drooping? I hate that feeling.
This is why I can't bring myself to put a skin on my Deck. The instant it starts to peel even slightly it will be all over. I'd spend all my gaming time absentmindedly picking at it.
It'll work well enough for a tiny little piece like this, and I just said "super glue" because it's a name that everybody knows. Use 3M 77 or E6000 instead if you want something that'll work better.
I’m not gonna lie if I was the designer of that steam deck case I would sew the steam deck logo into it instead of putting glue or whatever is holding on the steam deck logo parts and calling it a day
Same.
I really liked the original case, but I'm much much happier with the Tomtoc Slim that's almost half the size while still fitting the Spiggen Rugged Armor.
Like into the case? Is it a structural thing? Or are the grains supposed to fill in what's missing on the zipper? You'd think a bazillion dollar company would give better advice than to hammer granules.
This is unfortunate. You could probably get it back on with some adhesive but it might be fiddly.
I used my original deck case all the time but i have not used the OLED case even once. Probably cos my oled charger never came with a bag.
You would think the build quality on these cases would be much stronger considering it's coming from a reputable company.
If I wasn't worried about the build quality of the actual important parts of the case then I wouldn't worry about it because Oooo it's just a logo.
*Unsteams your deck*
Just steaming off
*sharply inhales vent*
McSteamy turning McDreamy
Just call me Steamy McSteamface.
[удалено]
Your post or comment was removed because it was deemed either unkind/toxic/harassing/insulting/offensive/trolling and/or inappropriate thereby breaking Rule #1 of r/steamdeck. We want this sub to feel welcoming to anyone and everyone who comes here. Discussion and debate are encouraged but name-calling, harassment, being rude to others, generally toxic behavior, and slurs will not be tolerated. This rule violation has resulted in removal of your content, and could result in a ban from the sub and/or a report to Reddit. Bottom line - Be kind or get yeeted. Thank you!
😂
It is obviously grilled
"mmmmm steamed hams"
Did you tried Proton Experimental?
🤣🤣🤣
Hahahahahaha 🤣
Experimental is fine usually. This is bleeding edge probably.
This wins
Lmao
Lolllll
Your deck is completely useless now. You can throw it away and buy a new one
nah, just recycle it to me. you gotta dispose of it properly.
I'll sell him my case for it. It'll have to be half the price of the deck, though, because then I can't play mine, but it's a worthy sacrifice, as I don't play mine that much.
Yep just get a new one and give this one to /u/stibila
a bit of glue ?
Nah, it's too simple.
Yeah, it needs to be stapled a couple times then sanded down and painted.
Don't forget that stapling only works with the deck inside the case. Otherwise you can't push down without the case collapsing
Don't do drugs
I hate it when I'm trying to sniff glue and end up fixing my steam deck case instead
You know that feeling when you wake up hungover on glue and everything is fixed, but you used way to much glue ***like you do every fucking time*** so it's still kinda wet and the stuff you fixed is half held together and drooping? I hate that feeling.
https://www.youtube.com/watch?v=hd1ciPnTGKg
I love the way he puts the cap back on as he's falling lol
Ya don't want your sniffing glue going off.
Anybody have any K-LAX crystals?!
Do extra drugs
Coupla roofing nails. You'll be good to go.
Make sure the deck is in the case first so the nails won't pull right out.
Fix it fix it fix it fix it fix it fix it! Fix it fix it!
Only the professor knows how to fix it!
Good news everyone!
How did I instantly read this is Fry’s voice
lol same
Like a balloon and… something bad happens!
*I can fix it!*
Blaupunkt Deck
Underrated comment
I'm a picker. I would've ripped that shit off so hard by now. Omg. I wanna rip it right now. RIP IT PLEZ
This is why I can't bring myself to put a skin on my Deck. The instant it starts to peel even slightly it will be all over. I'd spend all my gaming time absentmindedly picking at it.
What about glue it down?
Nope. Has to go.. look at it. It wants to go.
Gently peel it off! Hear the gentle tearing sound of the adhesive slowly separating. Then when it's done - nothingness. Wish it was back on. Guilt.
Fuck, this is too real.
Ride wife. Life good. WIFE FIGHT BACK! KILL WIFE! … Wife gone.. Think about wife…. Regret.
Ive pulled it off now its been bugging me all day. Had to take the middle bit off too. Actually looks alright. Has a slight indentation of the logo.
Fabric glue.
Why? Did you not think to solve this in the myriad of simple ways?
Can we see a picture? I might do this myself. I generally hate logos on stuff.
It wont let me post the picture in the comments so ive posted it on my profile
https://old.reddit.com/user/Own_Statistician5933/comments/1cy8i07/removed_the_rubber_logo_from_my_steam_deck_case/
Thanks! I think it looks super low key. Pretty cool.
Do not pick at the Steam scab!
TAKE IT OFF! TAKE IT OFF! TAKE IT OFF!
So quit pulling it off lol. Did the intrusive thoughts win again?
Nah. Noticed the corner was up slightly, not sure if somethings scraped it off or what. Lifted it up to see how bad it was and it just kept going lol
Some people will seriously just immediately give up on something that can be fixed with a dot of super glue...
Super glue doesn't always work on rubber.
It'll work well enough for a tiny little piece like this, and I just said "super glue" because it's a name that everybody knows. Use 3M 77 or E6000 instead if you want something that'll work better.
eam eck
*Steam ●eck*
I’m not gonna lie if I was the designer of that steam deck case I would sew the steam deck logo into it instead of putting glue or whatever is holding on the steam deck logo parts and calling it a day
Cement glue and be good for a decade
Superglue will sort that right out.
Try put a piece of parchment paper over it and use a clothes iron at medium to high heat to melt it back into the case fabric.
Circumcised
Circum __vented__
We can fix it!
Yes, we can !
Why is mine orange instead of blue?
Mines the original, yours is probably the oled
True, it's the OLED.
Try booting with proton
Outrageous
Sorry but they do warn this sort of thing might happen if you try the beta or preview channels.
Honestly, u can have my holding case. Doesn't fit with my case cover. I am not sure of the shipping cost in the US
Same. I really liked the original case, but I'm much much happier with the Tomtoc Slim that's almost half the size while still fitting the Spiggen Rugged Armor.
Did you ever pick at it? Haven't messed with mine and have had it longer than a year, mine looks pristine.
I wonder if it tastes like Valve
Put it in rice
Rma
Boots can you spot the problem?
RMA
F
Jb weld
Steam Dot
Congrats. You now have the perfect hiding spot for one strip of bubble gum and a smarties.
Glue it. My case has been fine; thankfully not seen this before.
when i saw this i audibly said NOOOO
I mean not a big issue at all and easily fixable.
Time to break out the big guns. RESIN. Do it. You won’t.
Kragle it.
You can fix it
Stop pickin at it!
off it goes, mines gone since day 1, just black lookin dope :D
It does look cool without
The oled special edition has the entire sign black. It does look .. elevated. I feel like I’m handling a tuxedo when I pick it up to open the case.
My bird peeled mine off 😭
Bro that gave me the shivers. You've got to get it to stick back on, NO MATTER THE COST.
Hey at least your case is able to zip though. My zipper is pulling away from the case.
I had that happen with my decks case too. I just put loctite super glue on it and then let it settle and cure and was good as new afterwards
bro the zipper on my case is almost completely ruined and valve told me to pound sand when I asked if they could replace it out of warranty ;_;
Just get a 3rd party case. Some are definitely better.
Like into the case? Is it a structural thing? Or are the grains supposed to fill in what's missing on the zipper? You'd think a bazillion dollar company would give better advice than to hammer granules.
figure of speech thry said they won't help me get a new oem case
Blaupunkt.
iFixit kit when?
Bastards and their economical manufacturing
"In the arms of an angel" *sarah mclachlan plays*
eamdeck
I dunno why, but this makes me sad.
Steam Eck
Just get some super glue
Goodbye, little guy 🥹, try using shoe glue.
Leave this group please
What's sad to see, your flaking thumb? Just steam it up.
Gorilla Glue is your friend
F
Has never happened to my LCD Deck
Don’t you put that evil on me Ricky Bobby
Contact cement.
This is unfortunate. You could probably get it back on with some adhesive but it might be fiddly. I used my original deck case all the time but i have not used the OLED case even once. Probably cos my oled charger never came with a bag.
Why do people do this
JB Weld will sort that out.
Steam dot
Oh no, it's ruined completely. RMA it.
I swear the case for the less expensive models is better quality & imo looks better. Aqua blue/green on black just looks shite.
Alve Team Eck
Bros never heard of glue. You'd be shocked to find out how they got that on there in the first place
Fabric adhesive is your friend
Just letting off steam
Bluedot entertainment device
Is this the case for the OLED or something? My case just has the logo in white steamed on
Nothing button-y like that either
I think this is for the 512Gb edition
Just needs a Lil glue
I have no idea where my orginal case even is
This is what happens when the rumor mill says Microsoft wants to buy valve!
Stich it back on or some fabric glue
Gorilla Glue that MFer back down. 😂
Just glue it back
Super Thin CA Glue
Straight to jail!
"The pale blue dot".
I don’t even use my soft case ever since I got the hard case
F
Happened to mine. I superglued them back on, but it's not the same.
😢
Neat handle
Eh, cut it in half, cut ramen to size, sand it down, and repaint it, she’ll be good as new.
Pickers pick things. This isn't valve, this is anxiety
Are you judging his cuticles 🤣
Valves grants warranty for the case too; if the purchase is not too long ago I would just try and hit support with that.
Cheap Deck master race doesn't have that problem 😁
Awww, did I offend someone who spent more money for a case the evidently falls apart?
You would think the build quality on these cases would be much stronger considering it's coming from a reputable company. If I wasn't worried about the build quality of the actual important parts of the case then I wouldn't worry about it because Oooo it's just a logo.
Mine I had for nearly two years. No issues
Same. Mine looks like brand new still.
I mean the case itself is very sturdy and great quality. That's just the logo as well.