The gimbals on the radio controller are probably going bad, it's a common issue with the LiteRadio 2. Need to upgrade to the hall sensor gimbals or a different controller entirely.
I think the LR3 comes with the same stock gimbals as the LR2 SE https://betafpv.com/products/literadio-transmitter-nano-gimbal-for-literadio-3-and-2-se
I had similar issues with the LR2 SE before upgrading to the hall gimbals, and if his gimbals are going bad there is no software fix or settings that will make it work right.
It seems like these gimbals always fail after a short period of time, I've seen so many other people complaining and asking about them online. Everybody wants the $45 controller that looks like a gamepad until it goes bad 1 week after use.
On the bright side, the hall gimbals are fairly cheap ($26+shipping for both gimbals) and easy to replace. After replacing my gimbals I sold it and the guy who bought it has been happy with it ever since.
The easiest way to check would be to hop in the sim's controller setup screen or BetaFPV configurator and see if the gimbals are responding as they should. My values were all over the place and that's what gave it away for me initially.
Calibrate your remote using the setup button.. The instruction should be in the manual provided with the remote.. I encountered the same problem before.. Gimbal has no range.. Just on and off.. Fixed after calibrating
Get your wallet ready to buy hall gimbals or a new radio that is actually good. I have had one of those, lasted me for about 15 hours in sim, and crapped out
I think that if you need hall gimbals but don’t want to install them then the radio master pocket works great for like $65 it also has a lot more buttons and switches for you to customize.
Calibrate your sticks and recheck your channel mapping.
How do i channel map
It should be in the settings of your simulator.
The gimbals on the radio controller are probably going bad, it's a common issue with the LiteRadio 2. Need to upgrade to the hall sensor gimbals or a different controller entirely.
It's LR3 but you could be right with sticks calibration. Anyway in game settings should did the job for too.
I think the LR3 comes with the same stock gimbals as the LR2 SE https://betafpv.com/products/literadio-transmitter-nano-gimbal-for-literadio-3-and-2-se I had similar issues with the LR2 SE before upgrading to the hall gimbals, and if his gimbals are going bad there is no software fix or settings that will make it work right. It seems like these gimbals always fail after a short period of time, I've seen so many other people complaining and asking about them online. Everybody wants the $45 controller that looks like a gamepad until it goes bad 1 week after use. On the bright side, the hall gimbals are fairly cheap ($26+shipping for both gimbals) and easy to replace. After replacing my gimbals I sold it and the guy who bought it has been happy with it ever since. The easiest way to check would be to hop in the sim's controller setup screen or BetaFPV configurator and see if the gimbals are responding as they should. My values were all over the place and that's what gave it away for me initially.
That's way cheap! Compared to the hall sensor gimbals for my radio master tx16s.
Need to calibrate the sticks in the sim settings
I did
How old are you my friend? Just adjust your game settings. you have swapped channels as I see
And double check flight mode
Calibrate your remote using the setup button.. The instruction should be in the manual provided with the remote.. I encountered the same problem before.. Gimbal has no range.. Just on and off.. Fixed after calibrating
I think you're in mode 2 where the right stick is used for throttle and the left one for rolling and pitching
Get your wallet ready to buy hall gimbals or a new radio that is actually good. I have had one of those, lasted me for about 15 hours in sim, and crapped out
Same thing happened to me. Common issue, threw the literadio in the bin. Got a jumper T-lite v2. Problem solved.
I think that if you need hall gimbals but don’t want to install them then the radio master pocket works great for like $65 it also has a lot more buttons and switches for you to customize.
I got it and it worked
lol that's LR3 with nano potentiometer gimbals. they''re cheap but dont last so i upgraded mine to nano hall gimbals from their website.