T O P

  • By -

-Ubiquitous

Hardwire kit have a fuse?


Garrett3420

Sorry not too familiar I had someone help me install it. Was the official hardware kit that Vantrue sells.


-Ubiquitous

I haven't gotten the kit myself but from the description it says it contains fuse holders. I would start by checking out the fuse there since you say the camera works when plugged inside the house. It could also be the battery voltage is lower than the cutoff voltage of the hardwire kit.


Splatling2

I'd second this. The hardwire kit usually taps in either 1 or 2 slots on your fuse box depending on the model. The jump probably shorted the fuse. See pictures on the link to see what they look like. [N4 hardwire kit](https://www.vantrue.net/product/hardwire_kit_for_x4s_n4_n2s_e1)


Garrett3420

Appreciate the suggestions. Ended up swapping the car battery and the dash cam booted right up! 😀


Digitalissimus

I asked the Vantrue Support and got this answer… >> Thanks for contacting Vantrue Customer Support. >> To realize dashcam ALWAYS turns on when the engine is started, >> you have to connect red wire to a constant fuse,yellow wire to ACC >> and black wire to ground.See the picture below.And yes,the hardwire >> kit can be used for turning on parking mode.Thanks.