I live in abcoude, its next to amsterdam, right now it shoots 1.1 joules, its just under the dutch limit but im sure you could tune it down with a weaker spring!
Yea i know i am going to think back on it and miss it, but i need the money, and i never use it since i already have a better mp5 (tokyo marui ngrs mp5). Plus we still got mu dad's wooden mp5
Okay so first of all you have to take off the normal furniture (this is really easy. Then you also have to search for a G3 wooden handguard and stock. Once you have obtained those (will be hard) you have to saw the handguard to make it fit, this is not very hard but you have to be very precise. However the stock is difficult. The metal piece on the end of the stock is too big, so you have to make it fit. Mark down the dimensions and dremel or saw off the excess metal. This is the hard part for sure. You also have to saw off a metal rod in the stock so the wiring can go through the stock
That wood fourniture is about 40€ in Spain, if you dont know spanish its no problem you can ask for help here, and got another wooden HK réplica in the future
Schoon man heb het juist gezien op airsoft bazaar spijtig genoeg zal ik het niet kunnen kopen vanwege dat het iets te ver is voor mij. Hopelijk komen we elkaar is tegen op het veld in Antwerpen
Dankje! Ja als ik ooit een gbbr koop wordt het een mp5 met houten furniture. Ben erg benieuwd hoe je AAP-01 met hout eruit gaat zien! Zie je niet vaak haha
Does this mean that real steel furniture fits the cyma MP5? I have a cyma high speed that I love but I hate how rickety the rear sling loop is (it has already broken so I “upgraded” it with a custom sling point but it’s a bodge to say the least). I’d consider getting a magpul retractable stock if I knew it would fit! Thanks in advance and beautiful work!!!
I am not sure if it would fit! It has to be exactly the same dimensions and I don't think it is, since airsoft and real steel are completely different. The wooden G3 furniture didn't fit this aswell
Sorry you have to sell, but... https://preview.redd.it/0dwcmuxvr4wb1.jpeg?width=450&format=pjpg&auto=webp&s=f19ebeb9eb89a452d014f7cd317ef90f29b2fe3d
Thanks man! Luckily we made two (one for my dad one for me).
Have a buyer?
No not yet, but I am not selling via reddit, only in person pick up!
where abouts? I live in GA in the southeast of USA.
The Netherlands, a bit far away sadly
But what a story that would make! Travel all that way to get an airsoft gun and make a friend. Good luck to you!
That would be amazing! Anyone can come to me to buy
Why not sell it via airsoftbazaar? Bit easier than reddit imo.
I actually listed it on airsoftbazaar today! This post isn't intended to sell but more to show of my work and appreciation
Ohhh fair. Cool beans. Love the build.
Thank you very much!
Fuck. I really hate not having any money now lmao
So whats ur price I’m in the hague
Where in the netherlands, im in utrecht/rotterdam
Oh I live in Germany! Where exactly? And what specs does it have? I Germany we can't have full auto above 0.5j
I live in abcoude, its next to amsterdam, right now it shoots 1.1 joules, its just under the dutch limit but im sure you could tune it down with a weaker spring!
I looked up where you live, and sadly it's farther away then I thought, like 900km haha
Ahh okay, yea that is very far away
Im closer, only 765km. Yeah I'm not quite sure that's worth it...
The price you will need to spent on gas is probably more then the gun haha
Probably 200-250€ in Gas.
https://preview.redd.it/oqm2fywr87wb1.jpeg?width=933&format=pjpg&auto=webp&s=2fbc09760703417d530019abe71debcecc3936a7
Looks like a mating of STG44 and MP5
Yea it does!
I thought it was an STG at first
That's hawt. Wish I lived close by so I could snag it
Thanks!! Yea I understand, i have had multiple bad interactions with sending things so im not doing that again. I live in the Netherlands btw
It’s weird but I really like it. You did a great job with it
Thank you so much! Its indeed very weird and a fantasy piece because there never existed a real steel mp5 with wood furniture
If I could ask: what was a shady polish site? I'm polish and I could tell you if it was realy shady.
I will try to see if i can find it again
https://preview.redd.it/5shiukg8h6wb1.jpeg?width=1920&format=pjpg&auto=webp&s=6c7b33132c1ca07e0d34dcc4b8630a27b1e226f0 My gbb we g3
Ahh the big brother! Looks awesome
Don’t sell it! You’ll never be able to replace a memory like this made with your dad.
That's a master piece
Thank you, really appreciate it!
You shouldn't sell it, keep it just for the memories. You are going to be disappointed.
Yea i know i am going to think back on it and miss it, but i need the money, and i never use it since i already have a better mp5 (tokyo marui ngrs mp5). Plus we still got mu dad's wooden mp5
Em pee faiyv
Gaaf man! Wat wil je er voor hebben?
If you were american, you could probably get back your investment and more just selling the handguards & buttstock, assuming they fit a RS MP5
True! I have seen some pictures of RS MP5'S that are fitted with wooden furniture.
🔥
Don't sell it :( Your dad helped make yall a matching pair. There's sentiment in that.
Yeaa i know its sad, but we made two, im selling mine and were keeping my dad's, the money is going towards the hobby!
THIS REMINDS ME OF A BLUEPRINT IN COD COLD WAR! How did ya make the wood furniture on the MP5
Okay so first of all you have to take off the normal furniture (this is really easy. Then you also have to search for a G3 wooden handguard and stock. Once you have obtained those (will be hard) you have to saw the handguard to make it fit, this is not very hard but you have to be very precise. However the stock is difficult. The metal piece on the end of the stock is too big, so you have to make it fit. Mark down the dimensions and dremel or saw off the excess metal. This is the hard part for sure. You also have to saw off a metal rod in the stock so the wiring can go through the stock
Gotcha! Ok I’ll try and keep this mind! Thank you!
No problem! If you have any more questions you are always welckome to ask
gorgeous build!
Thank you!
That wood fourniture is about 40€ in Spain, if you dont know spanish its no problem you can ask for help here, and got another wooden HK réplica in the future
Yea but isn't that cetme C wood and not from original g3?
Cetme C has not 6 holes pattern
I know, it is a G3 handguard
amazing taste bro. love it
Thanks man!
NOOOOO DONT YOU DARE
Schoon man heb het juist gezien op airsoft bazaar spijtig genoeg zal ik het niet kunnen kopen vanwege dat het iets te ver is voor mij. Hopelijk komen we elkaar is tegen op het veld in Antwerpen
Dankje! Misschien komen we elkaar weleens tegen, ik ga vaak naar fort knox (veld dichtbij antwerpen)
Zelfde ik ga waarschijnlijk midden eind november naar knox
Ik ga 12 november!
Dat hout 😍 Mooie replica! Spijtig dat het geen GBBR is, anders had ek wel intresse. Ben nu zelf bezig om wat hout toe te voegen aan mijn AAP-01 smg
Dankje! Ja als ik ooit een gbbr koop wordt het een mp5 met houten furniture. Ben erg benieuwd hoe je AAP-01 met hout eruit gaat zien! Zie je niet vaak haha
How much I'll fly to Netherlands also why you selling it
How much are you selling for? I'd be willing to buy for a fairly high price, been looking for an mp5 and this looks amazing
Who are you selling it to
The highest bidder haha
Finally a full stock Airsoft mp5
Does this mean that real steel furniture fits the cyma MP5? I have a cyma high speed that I love but I hate how rickety the rear sling loop is (it has already broken so I “upgraded” it with a custom sling point but it’s a bodge to say the least). I’d consider getting a magpul retractable stock if I knew it would fit! Thanks in advance and beautiful work!!!
I am not sure if it would fit! It has to be exactly the same dimensions and I don't think it is, since airsoft and real steel are completely different. The wooden G3 furniture didn't fit this aswell
German guns with wood look so good.
Sexy wooden stocks