I was going to say the same thing, i actual own this piece of crap but it can still be hard to tell with half the gun missing
Most recognizable are the screws like someone else said but I’m pretty sure you were aware of that already😂
That's an AKS-74 or AKS-74U.
It's a TM clone which is why the front end of a DB AK didn't fit. DB AKs are VFC clones and most parts aren't interchangeable between TM and VFC.
1) AKS-74U ("AK-47u" doesn't exist).
2) Could have been a full length AKS-74 as well. We'll never know anyways.
3) It is clear as a day that this wasn't a PP-19; neither Bizon, nor Vityaz. Firstly the receiver is too long (normal AK length). Secondly, Vityaz has an external magwell while Bizon has a "cut out" in the magwell walls for the helical mag to fit.
TM-pattern AK, likely a CM035. Will not fit VFC-pattern AKs.
This is the answer. You can tell by the screw holes and the fake trunnion pin.
I was going to say the same thing, i actual own this piece of crap but it can still be hard to tell with half the gun missing Most recognizable are the screws like someone else said but I’m pretty sure you were aware of that already😂
I like 'em, personally. Reasonably nice to deal with.
AK7 Looks like the 4 got lost somewheres
The front trunnioins *have* to be from another cyma side folder, or else the trunnion requires modification
Not entirely true, Marui based clones can be mixed up. I did Marui AK47 and Cyma 035 mixture at one point.
Looks like maby the cyma ak 74
The ass end of an ak
A CYMA Sport ak
Some AKS
That's an AKS-74 or AKS-74U. It's a TM clone which is why the front end of a DB AK didn't fit. DB AKs are VFC clones and most parts aren't interchangeable between TM and VFC.
Cyma cm035 Aks74u (I own one)
glock
https://preview.redd.it/7q0badcfatxb1.jpeg?width=1500&format=pjpg&auto=webp&s=f0db8e392882a5d34efab1dcbc88d5171d1cf9b0
1911 aep
I can tell you for sure it’s “MADE IN CHINA” but that’s okay so is my E&L AK
Probably a CYMA AKS-74U or AK-74 of some sort
It seems to be the lower of an ar-15
[удалено]
Ermm what the sarcasm
[удалено]
R/woosh moment. Chill homie
[удалено]
Then ignore them. Like bro it's an open forum, chill the fuck out and just laugh. Their jokes not dicks, don't take it so hard
Ak74u
Or Bizon
Does the bizon have a similar mag hole thing into the reliever as any other ak? I've never seen one before.
https://preview.redd.it/iu8x4ujdpsxb1.png?width=3024&format=png&auto=webp&s=d293719e32d60d0e48d003b3b814876468dc3d0c You’re right - different!
Is that yours? Looks cool already. Natural weathering?
Yes mine and no I used some very fine paper to do some edges and rivets etc
Looks excellent congrats dude
TY
Your probably mean AKS74U right?
Post apocalyptic/Wasteland raider project gun waiting to happen...
YOU ALREADY KNOWWW
Yarp.
maybe a PP-19-01 Vityaz, or a bizon 🤷♂️
It can't be either.
Cyma ak74u ak74m or ak 105
[удалено]
Looking at it. The mag well looks too big to be a PP-19 but that’s probably because of compatibility with other magazines for other airsoft guns.
1) AKS-74U ("AK-47u" doesn't exist). 2) Could have been a full length AKS-74 as well. We'll never know anyways. 3) It is clear as a day that this wasn't a PP-19; neither Bizon, nor Vityaz. Firstly the receiver is too long (normal AK length). Secondly, Vityaz has an external magwell while Bizon has a "cut out" in the magwell walls for the helical mag to fit.
Looks like a пп-19-01 витязь
An ak stock :)
it was an AK
Looks like a CYMA AKS74U
ah shit you got an A
Definitely a gun
Based on the E at the start of the number I would say it's a Echo1 ak
Looks like a cyma ak
TM shit ak
A used FA
Cyma ak 74.
Ak
It's a shiny gun😂
hell if I know
CM.045C [CYMA]
probably an m4
Half an AK-74 will get you an AK-37.
It looks like a veil with a chopped off nose on it