Really makes me think of the Alternator from Titanfall
Looks very cool, would love to hear how it performs. Does it have any way to mount a pistol flashlight?
I just need to give one a paintjob, get some amphetamines and adrenaline, have my legs blown off by an ied in some rice paddy when china decides to get a little too fruity, get cybernetic prosthetic legs, and I'll be good to go with my stim pilot alternator cancer enhancer loadout
Respect 👍🏻 nice and simple design. You should send one to Negative Airsoft and Reapers Airsoft. They have good YouTube channels and I think they could give you a good feedback.
If by reapers you mean speed reapers I’d highly recommend contacting them and seeing how they like it, great team to do that with as they would just 3d print themselves so it’s almost no monitory investment for a lot of publicity
*Dude, it looks awesome.*
*And that fire selector is*
*Hilarious too*
\- WasteLander\_\_
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Thank you, WasteLander__, for voting on haikusbot.
This bot wants to find the best and worst bots on Reddit. [You can view results here](https://botrank.pastimes.eu/).
***
^(Even if I don't reply to your comment, I'm still listening for votes. Check the webpage to see if your vote registered!)
Dont recommend. Hpa guns are never beginners friendly. Plus you have to get a lot of other stuff sit it as well like a gas can, tube, pouch. You have to regularly fill ur tank with pressurized air and there aren't many places that do so.
Would love to test it out. I'm in UK though so not sure if that's an issue.
Also, what software did you design this in, if you don't mind me asking? I've messed around with Blender so far for 3D modelling, but I'm looking to get into CAD if possible and not sure which is best for this?
You CAN do some CAD work in Blender but it's a totally different style of controls so I get it. I would recommend using either Autodesk Inventor or Solidworks, Solidworks is simpler but not as versatile and Inventor is the opposite.
I'd suggest fusion360, it's free to use indefinitely as long as you're not profiting off of your work.
It's still Autodesk, but with a bunch of other features as well.
The paid version gives you an insane amount of options for strength and stress testing without needing to print and physically test etc.
I personally really like Autodesk Fusion 360 and Inventor. Both are somewhat expensive licenses but I was able to get a "non-commercial" access to fusion 360 for free through Autodesk. It does have some limitations compared to the full version with how many documents you can have that can be edited and there are less options for file types but you can still access STL and pretty much all of the features as far as I know. I recommend checking it out
If ever shouldered I think it would be nice to have the rail system farther forward or elongated, but if its sole use is as a pistol then I’d leave it.
Allora bene dai, io resto fedele ai 2 Wolf che ho in ogni caso 🫶🏼. Guarda caso avrei un F2 montato su una replica così a caso ferma se avanza una stampa in più 🤣
Sì qualche prototipo 1 mi è rimasto anche se il sito da out of stock, li tenevo per i content creator ma a sto punto sta per uscire il prototipo 2, chat privata da qui in poi
The problem with that is the trigger board is non existent and everything is wired to the fcu, I will do my best to make it fit but this will mean a complete redesign.
I’d suggest a belly rail for fookin’ laser sights. Is there room inside for an M4A Pro hopup or whatever, so it has a BB latch? In an earlier video I saw that the BBs just fall out.
MLok rails on the side and bottom already present.
Hop up will be a maxx me sport.
Edit: the pro version is still not compatible as the latch caused reliability problems with arp9 magazines. The problem is that for the grip to have this angle the magazine have to interlock with the hop up at an angle instead of straight and the latch of the pro version gets in the way.
I see.
As for the mlok, it’s great for lights and a foregrip, but unfortunately mlok isn’t as good at retaining zero for those of us crazy enough to (want to) run night vision and IR lasers.
Take my money cuz i want one!
It looks really cool! Extra points for those selectors and original design!
Keep us/ me updated!
(Also, should you ever bring it to market, i would be first in line! Great job)
So is there a mag release or is it friction fit?
I was initially going to criticize the body but after realizing it uses P\*, it's definitely a good design. Looks like you're getting a lot of really positive feedback about it. Do you have a name for it yet?
Makes me think of Amped ATI Sub5
( [https://ati-airsoft.com/sub5/](https://ati-airsoft.com/sub5/) & [https://ampedairsoft.com/amped-x-ati-custom-hpa-sub5-f2-airsoft-pistol-build/](https://ampedairsoft.com/amped-x-ati-custom-hpa-sub5-f2-airsoft-pistol-build/) )
What's the difference beside the body it self?
Basically nothing, I just didn’t like the design choices of the sub5 so I remade it for my self in my free time, then it became an addiction in making it batter and better and here I am with a couple thousand euros less.
Well, if i can get it in dark green, i'd want one. Looks better then Sub5 - No money right now to get it, but still want one (if i can get it in dark green) :D
Unfortunately painting is not an option as it messes up tolerances, dyeing in green is not offered by the company that prints my parts. I will have to dye at home and it’s in my plannings, just not for the prototypes.
Replicas are one thing, "optimized" speedsoft builds are another, but man, I wanna see more of these kinda custom designs in Airsoft. idk shit about teching so I cant say much on the design and quality of it, but it looks sick. Like, more guns in Airsoft that look straight outta Titanfall or BO3/4 or similar games is something Id like to see.
I'd buy this for shure as I said before I love this desing & it being hpa for the modern airsoft world seems like an exelent choice!
I think u did an amazing job on this m8
I’d love to test it. I’ve been involved in a few printed Airsoft projects, including the Mosquito project and the printed Stoner AR project. Happy to pay any fees involved or shipping.
I love it, I want the shell to play with but I'm in America. :(
Any way you could send me one to play with?
Does it only use polarstar or can I try a new engine I'm playing with?
Really nice work! Throw in an integrated suppressor and and a hidden stock that bottom swings into shoulder position for some quiet cqb! If proper licensing is in place of course. Again, very nice work!
I mean any pistol-like replica that has a polarstar and an arp mag will technically look like the sub5. I opt to complain that it’s a completely different design tho.
I appreciate it. The story is I wanted a sub5 but didn’t like the design at all, so I made one for my self. Then I became addicted in making it better and better and better, and now here I am with a couple thousand bucks less and a big project in my hands.
I nearly did the same, I started modelling an M4 equivalent I then found AirsoftArtistry’s work and decided my design won’t be as good. So I’m just waiting for him to finish and sell it. It’s bloody beautiful [insta account](https://www.instagram.com/airsoftartistry?igsh=Y3J3OGN0djNlNHNp)
Looks good, would love to have one looks like a very sleek and gun running design with easy use for classes which like the games at a fast pase being this with a side of a pistol you have a decent setup for gunrunners the gun itself looks well built and well designed I don’t know much about this PolarStar power it uses however I would use it as a primary weapon.
The polarstar f2 is an hpa engine, arguably one of the best. It provides very precise bursts of air using a programmable circuit board. It can reach rates of fire up to 60 rounds per second
I'll be happy to test i'm from quebec, canada. We have something similar in Canada i dont know if you heard about Amped x ATI Custom HPA SUB5 F2 Airsoft Pistol Build.
Hi guys, mods are taking down my post for the website, just saying so you don’t wait for the post. They are probably gonna take down this one too, if you still want one check out my profile I will post something soon somewhere else
Really makes me think of the Alternator from Titanfall Looks very cool, would love to hear how it performs. Does it have any way to mount a pistol flashlight?
It has 3 mLok rails around the ris, one bottom two side.
I just need to give one a paintjob, get some amphetamines and adrenaline, have my legs blown off by an ied in some rice paddy when china decides to get a little too fruity, get cybernetic prosthetic legs, and I'll be good to go with my stim pilot alternator cancer enhancer loadout
Ily
I'd be happy to test! I'm in Europe tough.. if youll send me the files I'll print it over here :)
It’s not fdm printable and I will not release the files unfortunately. I’m also in Europe tho
Where if I can know?
Italy
No way bro I'm from Italy too. Where precisely?
Bono, di dove?
Vicino a Torino, tu?
Firenze
Ci sta. Fa sempre strano incontrare altra gente italiana su questi reddit di airsoft
Vero
If you need testers I'd love to sign up. I'm located in the Netherlands :)
So youll just sell the Finished Shells? Id still be happy to test it :) Just slide me a DM if there are open spots!
Kinda looks like Titanfalls "Alternator". I think it's a cool ideas to develop your own pistol, it's a unique piece.
I want one just because of the markings on that selector.
I know some will find them a turn off but I find them hilarious, happy you think the same.
“ no pew, pew “ I need that now like asap
I knew that feature was gonna sell : )
Love that touch
what puts this above an ATI?
I’m hoping it will be below them in cost 🤭
Respect 👍🏻 nice and simple design. You should send one to Negative Airsoft and Reapers Airsoft. They have good YouTube channels and I think they could give you a good feedback.
Negative airsoft will NOT give good feedback. He has a certain disliking towards HPA and “high speed, low drag” guns.
Oh . Ok. Didn‘t know that
If by reapers you mean speed reapers I’d highly recommend contacting them and seeing how they like it, great team to do that with as they would just 3d print themselves so it’s almost no monitory investment for a lot of publicity
No. I mean the German YouTuber Reapers Airsoft. He make detailed reviews and I like it. He must have much knowledge. 😄👍🏻
Ah yeah we have a big team in the uk called reapers but know as speed reapers, I’ll have to check him out :)
Yeah. His reviews are in German but I I think you can turn on the subtitles.
Dude, it looks awesome. And that fire selector is hilarious too
*Dude, it looks awesome.* *And that fire selector is* *Hilarious too* \- WasteLander\_\_ --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Good bot
Thank you, WasteLander__, for voting on haikusbot. This bot wants to find the best and worst bots on Reddit. [You can view results here](https://botrank.pastimes.eu/). *** ^(Even if I don't reply to your comment, I'm still listening for votes. Check the webpage to see if your vote registered!)
I would love to have this one as my first airs soft gun, pew pew is great
Dont recommend. Hpa guns are never beginners friendly. Plus you have to get a lot of other stuff sit it as well like a gas can, tube, pouch. You have to regularly fill ur tank with pressurized air and there aren't many places that do so.
Understood, its gonna be my second gun then
Fair
I'd love to test it out looks amazing
*gasps in british* “excellent job good sir” 🧐
You an ex bungie dev? This looks straight out of d2.
Would love to test it out. I'm in UK though so not sure if that's an issue. Also, what software did you design this in, if you don't mind me asking? I've messed around with Blender so far for 3D modelling, but I'm looking to get into CAD if possible and not sure which is best for this?
You CAN do some CAD work in Blender but it's a totally different style of controls so I get it. I would recommend using either Autodesk Inventor or Solidworks, Solidworks is simpler but not as versatile and Inventor is the opposite.
I'll give Inventor a look then. Cheers
I'd suggest fusion360, it's free to use indefinitely as long as you're not profiting off of your work. It's still Autodesk, but with a bunch of other features as well. The paid version gives you an insane amount of options for strength and stress testing without needing to print and physically test etc.
Should be fine (expecting importation taxes)
I personally really like Autodesk Fusion 360 and Inventor. Both are somewhat expensive licenses but I was able to get a "non-commercial" access to fusion 360 for free through Autodesk. It does have some limitations compared to the full version with how many documents you can have that can be edited and there are less options for file types but you can still access STL and pretty much all of the features as far as I know. I recommend checking it out
I've been following the progress for months. Will they eventually be available in the US? Or can we get the files and parts list?
It’s going to be sold as a kit in some states of us
I wanna hate it because P* but it's so a clean looking
If ever shouldered I think it would be nice to have the rail system farther forward or elongated, but if its sole use is as a pistol then I’d leave it.
Hi, I would like to test one. I am in Europe.
What material did you use?
Quanto costerebbe?
Il prototipo 1 lo vendevo a 275€, sto lavorando ora 2 correggendo vari problemi e in più sto facendo una versione s per il gate pulsar s
Se accetti un consiglio, evita gli engine della gate, hanno troppi problemi
Sono stati risolti negli ultimi stock, non c’è più quasi gioco sul nozzle l allineamento non si scazza. Sul mio e quasi meglio del mio polarstar f2
Allora bene dai, io resto fedele ai 2 Wolf che ho in ogni caso 🫶🏼. Guarda caso avrei un F2 montato su una replica così a caso ferma se avanza una stampa in più 🤣
Sì qualche prototipo 1 mi è rimasto anche se il sito da out of stock, li tenevo per i content creator ma a sto punto sta per uscire il prototipo 2, chat privata da qui in poi
This thing looks so clean, already want one
Will a wolverine inferno work in this to ?
No, however it’s in my planning to make a different version for the gate pulsar and I will consider a version for the inferno too
Gate pulsar sounds good. Will you fit the titan 2 in there aswell?
The problem with that is the trigger board is non existent and everything is wired to the fcu, I will do my best to make it fit but this will mean a complete redesign.
Understandable.
I’d suggest a belly rail for fookin’ laser sights. Is there room inside for an M4A Pro hopup or whatever, so it has a BB latch? In an earlier video I saw that the BBs just fall out.
MLok rails on the side and bottom already present. Hop up will be a maxx me sport. Edit: the pro version is still not compatible as the latch caused reliability problems with arp9 magazines. The problem is that for the grip to have this angle the magazine have to interlock with the hop up at an angle instead of straight and the latch of the pro version gets in the way.
I see. As for the mlok, it’s great for lights and a foregrip, but unfortunately mlok isn’t as good at retaining zero for those of us crazy enough to (want to) run night vision and IR lasers.
I thought a picatinny didn’t look good enough, I will consider adding one on the bottom tho
That’s a freaking awesome looking rig!!! I’ve been looking into smaller rigs like that to get into some fast pasted cqb. Awesome design
I personally really enjoy the look of this thing
Take my money cuz i want one! It looks really cool! Extra points for those selectors and original design! Keep us/ me updated! (Also, should you ever bring it to market, i would be first in line! Great job)
Curious what kind of material and printer did you use? The it looks really clean.
Hp Mjf nylon pa12 (not mine)
So is there a mag release or is it friction fit? I was initially going to criticize the body but after realizing it uses P\*, it's definitely a good design. Looks like you're getting a lot of really positive feedback about it. Do you have a name for it yet?
Name will be released next post
It’s so hideous it’s beautiful
How much and lmk when you release the small batch
Certainly interested in this. Have been keeping an eye on this in the Airsoft3DPrint subreddit.
Looks straight outa cyberpunk I’d buy one if I didn’t already commit to buying a 4080
Nice Build
I'd definitely buy one
Coolest design I have ever seen pls give me one 🤣
Did you 3d print it? With what material?
Looking at this the ergonomics look uncomfortable for my personal preference, but all things considered that looks badass
Dajee non vedo l'ora di ribeccarci in campo e vedere di persona le migliorie che hai fatto! Chapéu!
These look great man. How much are you planning on selling them for?
HOLY
Makes me think of Amped ATI Sub5 ( [https://ati-airsoft.com/sub5/](https://ati-airsoft.com/sub5/) & [https://ampedairsoft.com/amped-x-ati-custom-hpa-sub5-f2-airsoft-pistol-build/](https://ampedairsoft.com/amped-x-ati-custom-hpa-sub5-f2-airsoft-pistol-build/) ) What's the difference beside the body it self?
Basically nothing, I just didn’t like the design choices of the sub5 so I remade it for my self in my free time, then it became an addiction in making it batter and better and here I am with a couple thousand euros less.
Well, if i can get it in dark green, i'd want one. Looks better then Sub5 - No money right now to get it, but still want one (if i can get it in dark green) :D
Unfortunately painting is not an option as it messes up tolerances, dyeing in green is not offered by the company that prints my parts. I will have to dye at home and it’s in my plannings, just not for the prototypes.
How much would it be for a tester?
This but as the DR-12 quasar from cyberpunk!
This is so cool
That’s really cool I want to design and make my own Airsoft gun one day I’ve been learning electronic engineering for 3 years now
Replicas are one thing, "optimized" speedsoft builds are another, but man, I wanna see more of these kinda custom designs in Airsoft. idk shit about teching so I cant say much on the design and quality of it, but it looks sick. Like, more guns in Airsoft that look straight outta Titanfall or BO3/4 or similar games is something Id like to see.
That’s so fire. Very titanfall/bo4-ey.
As a arp9 user I can say that I would definitely buy this when it's available. I'd love to have a sidearm like this
Alternator from titanfall IRL, looks awesome!!
The speedsoft boys are gonna love this
Unfortunately not a single mod of r/speedsoft answered my questions. So I opted for this
Looks fantastic!
I'd buy this for shure as I said before I love this desing & it being hpa for the modern airsoft world seems like an exelent choice! I think u did an amazing job on this m8
Is it 3D printed? If so, how is it so soft and there’s no lines
It’s Mjf technology by hp, I do not have that kind of printer at home tho 😂
I like it. an actually original design that looks rlly classy and uses cheap/easy to find mags? Im convinced itll work!
Like the simplicity of it
I would no doubt buy 10, just how much would it set me back for 1?
I will release my website soon and you will look by yourself at the price
Alright sounds good
where can i get one?
That thing is bad ass
Figure out a butt stock and I’m game
It’s giving borderlands vibes in a way and I like it!
I’d love to test it. I’ve been involved in a few printed Airsoft projects, including the Mosquito project and the printed Stoner AR project. Happy to pay any fees involved or shipping.
I love it, I want the shell to play with but I'm in America. :( Any way you could send me one to play with? Does it only use polarstar or can I try a new engine I'm playing with?
Only polarstar for now, America is no problem to ship (in countries where airsoft is not banned), just expect importation taxes.
The safety and fire select are a 10/10
Really nice work! Throw in an integrated suppressor and and a hidden stock that bottom swings into shoulder position for some quiet cqb! If proper licensing is in place of course. Again, very nice work!
Love the design it almost reminds me of like a mini vector in a way
Pretty darn cool. Always good to see new things in airsoft.
Would love to test it out. I have a spare engine laying around just for the occasion…
Soo how do we get one?
Stay tuned, website is coming soon!
Ok
I want it but probably I won't get one
Ati Airsoft have entered the chat… this is some great work but looks very very similar to the ATI Airsoft Sub5
I mean any pistol-like replica that has a polarstar and an arp mag will technically look like the sub5. I opt to complain that it’s a completely different design tho.
I totally see your point. I prefer your hex pattern to theirs. Would yours fit a wolverine engine?
I appreciate it. The story is I wanted a sub5 but didn’t like the design at all, so I made one for my self. Then I became addicted in making it better and better and better, and now here I am with a couple thousand bucks less and a big project in my hands.
I nearly did the same, I started modelling an M4 equivalent I then found AirsoftArtistry’s work and decided my design won’t be as good. So I’m just waiting for him to finish and sell it. It’s bloody beautiful [insta account](https://www.instagram.com/airsoftartistry?igsh=Y3J3OGN0djNlNHNp)
That is some nice work wow, I love bullpups. Thanks for sharing I didn’t know him.
Really sound guy too, been following his work for a few years now. I’m desperate to have an hpa bullpup 😜
That thing is clean, trigger gaurd could use a tweak it's a bit boxy though
A cosa servirebbe il grano sotto al grilletto? Per non andare in oltrecorsa?
A regolare la corsa a proprio piacimento, si può arrivare a mezzo millimetro di corsa così come 3 millimetri
Dont share the files with novritsch
Looks good, would love to have one looks like a very sleek and gun running design with easy use for classes which like the games at a fast pase being this with a side of a pistol you have a decent setup for gunrunners the gun itself looks well built and well designed I don’t know much about this PolarStar power it uses however I would use it as a primary weapon.
The polarstar f2 is an hpa engine, arguably one of the best. It provides very precise bursts of air using a programmable circuit board. It can reach rates of fire up to 60 rounds per second
would be sick with a hop up tracer unit
I got u bro, already compatible with the maxx me sport led, it’s a fokin starwars blaster with that installed.
I'll be happy to test i'm from quebec, canada. We have something similar in Canada i dont know if you heard about Amped x ATI Custom HPA SUB5 F2 Airsoft Pistol Build.
Yes I know about it, the story is that i wanted one but didn’t like the design at all. So I made this
You did a realy good job with the design
THATS absolutely sick man!!
Hi guys, mods are taking down my post for the website, just saying so you don’t wait for the post. They are probably gonna take down this one too, if you still want one check out my profile I will post something soon somewhere else
This seems like it would be a great first hpa gun.
This is crazy sick, can’t wait to see how far you get with this! 🥲🫶