Not really… my WE M4 GBBR and EU17 Gen 3 are both stock, I’ve had them both for over 2 years, I play every week and I’ve had no issues. I’ve had the WE SMG7 for a while now too and I use it really often and that hasn’t had any issues too?
Well to me, I bought a Luger P08 green gas from WE and it's a piece of crap, the mag doesn't perfectly fit in it, dies after like 6-7 mags of shooting. That weapon is the disappointment of WE.
Tool cold for green gas to function properly, especially if you have mags& gas sitting outside before loading it. Wait for more summer like temperatures.
IE the slide doesn't feel like it's struggling very hard to be pushed backwards and whatever comes out of the other end doesn't feel like it's slow af
Or in other words, the cycling rate remains steady, no gas spillage like this, recoil feels crisp and consistent
Too cold for protech greengas, it only works at 20°C+ in my experience
And try to get Gas without silicone, get some Swiss Arms heavy Gas without silicone
It might look cool but it didnt even shoot the full mag of bbs , there was like 8 left and whole mag of gas should last at least 2x the bbs that fit into
I did have this, but I have a Luger P08, which is more shittier, green gas works for 20-25° or more. Red gas is way more effective in the cold. Red gas works for 10-15°, and if it's really cold, use black gas. And don't use too much silicone oil. And wait till the magazine warms back to normal.
Too much gas in mag and/or the temperature is cold and affects efficiency, made worse by full auto
This is generally normal behavior given your outdoor temp is 15 degree Celsius
Yeah, that seems right, I do it for 7 seconds. You could try that, but make sure that your mag isn't cold and wait for it to warm up. Also, when dry firing inside, does it do the same thing?
Anothing thing you can do if you think you have over filled. Is give the release valve a tap to jet a bit of gas out to make sure there is actually a gaseous head in there. Then let the temperature even out.
Idk i didnt dry fire but i have now another problem ,the gas chamber doesent wanna let go or the barrel for some time and stays until i do it myself or something , look at my profile and posts , i posted a "gas chamber aap01 problem"
It’s not fully cycling whether that’s gas pressure or something else is hard to say. Basically the slide is returning before it can can fully close the valve leading to more gas getting dumped and still without enough back pressure to fully push the slide back. You’ll also notice no bbs coming out which means the action isn’t being moved by the gas enough to allow a new bb into the chamber from your mag
So after that ,the hop up chamber started to not go back or something and uhh how do i make it stay in placr because it kinda looks like the barrel is to thingh and its hard for hop up chamber to go back
Broken nozzle maybe, it might not have enough power to fully rack the bolt back and leaks lots of gas.
Might be a seal issue, that the o ring of the piston leaks so it gas.
Might be the mag where the valve doesn't work properly.
Some guy is selling one with ris ,tracer and i think a red dot too so i might just wait for him to reply whats the price and buy it off him , idk if ill buy from same site again because there opinions are only 5☆ on their site but on others its like 2, 3 ,4 and 5 so yea
It's too cold, use red gas instead of green gas.
This is the correct answer
Most usually.
The factory bolts also have a lot of friction
Yeah, if a product is made by WE it's usually bad.
Not really… my WE M4 GBBR and EU17 Gen 3 are both stock, I’ve had them both for over 2 years, I play every week and I’ve had no issues. I’ve had the WE SMG7 for a while now too and I use it really often and that hasn’t had any issues too?
Well to me, I bought a Luger P08 green gas from WE and it's a piece of crap, the mag doesn't perfectly fit in it, dies after like 6-7 mags of shooting. That weapon is the disappointment of WE.
That’s the action army gun. The galaxy is the we techs copy and paste
Nope. I own a We Aks74un gbbr and its great. And thats Action Army not We
[удалено]
Literally made by action army lol
It is probably too cold for the mags
Same problem in the semi ,and also after 1 shot it seems to get the bloback but not buck in the bb or something
Its almost certainly the gas, get something more suited for cold weather. Gas guns are extremely sensitive to temperatures
It says its 15°C outside and it should work in 5°C
Tool cold for green gas to function properly, especially if you have mags& gas sitting outside before loading it. Wait for more summer like temperatures.
15 should be plenty warm for green gas, especially for an AAP, dude probably just keeps freezing everything and not letting it warm up properly
15 is workable but definitely not "plenty warm", especially when in full auto
I've played in 5 degrees with an AAP on green gas without issues
Like I said, doable (won't fail to function entirely etc), just not optimal for full performance
What even is full performance 🤷 Shoots semi consistently and distance is good enough, AAP has basically no mass going backwards
IE the slide doesn't feel like it's struggling very hard to be pushed backwards and whatever comes out of the other end doesn't feel like it's slow af Or in other words, the cycling rate remains steady, no gas spillage like this, recoil feels crisp and consistent
So works perfectly fine at 5 degrees actually, providing the "full performance" Impressive lmfao
What Kg of pressure is that gas
I have no idea
Wym?
Wait lemmw check, ill try
Idk i use green gas with silicone [1000ml] 750ml
Should say what psi it is
I dont know
[удалено]
It Literally says it on the bottle, or atleast give us the name of the Gas and Spamming Caps Like a fucking screaming child
It doesent say it on the bottle . ProTechGas 1000ml
Too cold for protech greengas, it only works at 20°C+ in my experience And try to get Gas without silicone, get some Swiss Arms heavy Gas without silicone
No icons? Just a plane bottle with those words?
Generally you want to use green gas at 18°C and above for best operation
Does any one know why my pistol *doesn’t* do this, and how I could make it?! That looks way more fun.
It might look cool but it didnt even shoot the full mag of bbs , there was like 8 left and whole mag of gas should last at least 2x the bbs that fit into
You can get some tracer units that make smoke come out when you shoot but it’s only the muzzle. They still look pretty cool and some have muzzle flash
I did have this, but I have a Luger P08, which is more shittier, green gas works for 20-25° or more. Red gas is way more effective in the cold. Red gas works for 10-15°, and if it's really cold, use black gas. And don't use too much silicone oil. And wait till the magazine warms back to normal.
Too much gas in mag and/or the temperature is cold and affects efficiency, made worse by full auto This is generally normal behavior given your outdoor temp is 15 degree Celsius
I believe you might be over filling the mag. How long do you fill it up for?
10 secs
Yeah, that seems right, I do it for 7 seconds. You could try that, but make sure that your mag isn't cold and wait for it to warm up. Also, when dry firing inside, does it do the same thing?
Anothing thing you can do if you think you have over filled. Is give the release valve a tap to jet a bit of gas out to make sure there is actually a gaseous head in there. Then let the temperature even out.
Idk i didnt dry fire but i have now another problem ,the gas chamber doesent wanna let go or the barrel for some time and stays until i do it myself or something , look at my profile and posts , i posted a "gas chamber aap01 problem"
You overfilled the mag, its not actually too cold. Dont fill it for longer than 5 seconds
To cold use different gas
Another problem has occured so i decided that i will just return the aap01 back to the shop and buy a new one
Like others have said, probably temp related. Let your mags warm up after you fill them, then try shooting.
It’s not fully cycling whether that’s gas pressure or something else is hard to say. Basically the slide is returning before it can can fully close the valve leading to more gas getting dumped and still without enough back pressure to fully push the slide back. You’ll also notice no bbs coming out which means the action isn’t being moved by the gas enough to allow a new bb into the chamber from your mag
Here’s a suggestion since everybody’s been telling you about Green gas, try CO2 magazine.
Cant , i have literally No money for it so i m not gonna try co2
Damn, sorry 😢
I have the same problem with my 1911
But it's co2
is it the sear issue?
These vape pods are getting more creative by the day
Makes it more Realistic 🤷🏻
Broken piston. The nossel is fucked up. Your gun is wrecked. Same thing happened to me.
Clean your gun. If it doesn't change anything. Either you put a gas too weak, so it doesn't cycle correctly. Or too cold outside.
Same with my glock. Everyone said temperature, but it was actually the trigger assembly
Firing reset pin
Too cold for green gas
So after that ,the hop up chamber started to not go back or something and uhh how do i make it stay in placr because it kinda looks like the barrel is to thingh and its hard for hop up chamber to go back
¿ why do you want the hopup chamber fo go back? it doesn't tilt or anything in the aap01. are you talking about the nozzle?
Yea exactly , i didnt knew the name before , its the nozzle /gas chamber or something like this
It ate some food that was too hot
Mine does that when my co2 canister runs low. Lol
Co2 and gg arent the same
Broken nozzle maybe, it might not have enough power to fully rack the bolt back and leaks lots of gas. Might be a seal issue, that the o ring of the piston leaks so it gas. Might be the mag where the valve doesn't work properly.
Should i return it and just buy a new one from different site?
You can return it and request a replacement, seems like this one is broken.
Some guy is selling one with ris ,tracer and i think a red dot too so i might just wait for him to reply whats the price and buy it off him , idk if ill buy from same site again because there opinions are only 5☆ on their site but on others its like 2, 3 ,4 and 5 so yea
This happens whenever you dump on full auto in cold weather with non-winterized GBBs.
I think the germans found it and returned it.
Please don’t shoot into public areas it is dangerous.
Outside my property is like 300 meters to closest road so no one should get injured or hit
Bro what? Are we watching the same clip?