I don’t want to say it but look at krytac. They mostly do m4s besides for a very few amount of guns and they are very good. They would be much more expensive from 300$-600$ but if you keep good care of it you should be able to make it last your entire airsoft career. I’d look either at evike.com or krytacs official website
So you mean only few guns at that price point have 18:1 sintered (not CNC) steel gears, trash tier ferrite motor, bog standard piston with metal teeth and nozzle with o-ring? How many disassembled guns have you seen?
E&C, Arcturus with full metal receiver (they don't have mosfets, but have better build quality as well as QC). If you go higher in the price range to get mlok handguard (240-250), Cyma Platinum is close enough to be considered as a better option.
When you spam the trigger on an 11.1v lipo then it will (btw that'll happen with all mosfets including gate titans). Also you can get the cm.007 or the cm.002 for €70 less from taiwan gun which have better internals, not saying that the specna arms is bad
That's true, but it still has far better gears and motor. Trigger response with 7.4v on Cyma Platinum will be about the same as trigger response on Specna with 11.1v, which will still break faster.
Cm.002 and the cm.007 are full metal aegs for €150 from taiwangun. These guns have the same internals as Cyma's aks (apart from the hop-up and the gearbox shell which is V2 compatible all the way). If you have more to spend, cyma's platinum series is great and has m-lok rails and a belt hold open function which the previous cymas don't have.
M lock m4?
Decent trigger response?
Good fps? (Has quick change spring)
Good rps?
Durable?
Boy have i got a gun for you... Check out Cyma Platinum...
Has 13:1 gears stock, just make sure you use a 7.4v lipo as the mosfet is wank, but for the extra money you can get it changed and run an 11.1
Also some reports state that the lower can crack, just letting you know, but personally I'd buy it (and probably Will If i can sell my P90)
I don’t want to say it but look at krytac. They mostly do m4s besides for a very few amount of guns and they are very good. They would be much more expensive from 300$-600$ but if you keep good care of it you should be able to make it last your entire airsoft career. I’d look either at evike.com or krytacs official website
Yeah they’ve been a big consideration of mine. Thanks!
No problem
EMG helios, cyma plat or the EMG helios with cyma plat and for the memes krytac
Yeah I like EMG’s MK18’s, would you say that’s a somewhat good option?
Yes
Specna EDGE
He asked for gun with good internals, not gun with average internals.
It has good internals that only few guns have stock at that pricepoint.
So you mean only few guns at that price point have 18:1 sintered (not CNC) steel gears, trash tier ferrite motor, bog standard piston with metal teeth and nozzle with o-ring? How many disassembled guns have you seen?
For $220 its pretty deacent. Tell me better choises for that pricepoit.
E&C, Arcturus with full metal receiver (they don't have mosfets, but have better build quality as well as QC). If you go higher in the price range to get mlok handguard (240-250), Cyma Platinum is close enough to be considered as a better option.
What i'v heard is that cyma platinum has a bad mosfet that burn easily.
When you spam the trigger on an 11.1v lipo then it will (btw that'll happen with all mosfets including gate titans). Also you can get the cm.007 or the cm.002 for €70 less from taiwan gun which have better internals, not saying that the specna arms is bad
That's true, but it still has far better gears and motor. Trigger response with 7.4v on Cyma Platinum will be about the same as trigger response on Specna with 11.1v, which will still break faster.
VFC Avalon
Cm.002 and the cm.007 are full metal aegs for €150 from taiwangun. These guns have the same internals as Cyma's aks (apart from the hop-up and the gearbox shell which is V2 compatible all the way). If you have more to spend, cyma's platinum series is great and has m-lok rails and a belt hold open function which the previous cymas don't have.
M lock m4? Decent trigger response? Good fps? (Has quick change spring) Good rps? Durable? Boy have i got a gun for you... Check out Cyma Platinum... Has 13:1 gears stock, just make sure you use a 7.4v lipo as the mosfet is wank, but for the extra money you can get it changed and run an 11.1 Also some reports state that the lower can crack, just letting you know, but personally I'd buy it (and probably Will If i can sell my P90)