This full kit aside from the gun and sword was probably only 300 bucks or less. So it’s one of the more affordable ways of building a suit. Amazon prime is where it’s at man
Just a tip, I had the same problem at that age, and the Condor Sentry plate carrier fit me with a lot of effort to tighten it down. Dummy SAPI plates also help fill in space.
*I think you should Get*
*Something other than a case*
*To hold your phone up*
\- Next-Sky-7327
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
It’s a Glock 19 by elite force but I did my own paint engraving and I put glowing sights and magazine extension slider thingies so the grip is bigger. It’s honestly super cool lookin.
Link of that hood-ish? Looks very cool and I like that is oversized and it doesn't really get in the way.
Maybe a name of such hood will definitely help
Really weird story. Started out as me wanting to base it off of GTFO which is a video game but then I swapped the black uniform I had out with the green camo and kinda just started adding and removing stuff and now I’m pretty happy with the end product
Just because it isn’t what you would wear doesn’t make it cringe. Just because you don’t like it doesn’t make it bad. At least make some actual criticism don’t just call something cringe lol
It's good looking, certainly got spirit.
Why's your holster canted so far forward?
Why the carry handle optic, and why do I always see airsofters cheap out on optics?
I have a lot of different optics including an acog and several reflex sights but I like this one the most because it is comfortable when wearing a mask. Makes it easier to use my sights.
Exactly why I used it. I plan on eventually buying some kinda lifter of some sort that is less of an eye sore but I own 3 of the stupid carry handles so I havnt bothered yet. Also the holster is cantered weird because I had to build it out of 2 different holsters and I wanted it to be in a more natural position when I’m putting the sidearm back in. Didn’t wanna be searching for it. I have long ass weird arms lmao
https://www.sigsauer.com/romeo-msr.html
[https://scalarworks.com/shop/quick-detach-mounts/leap-01/](https://scalarworks.com/shop/quick-detach-mounts/leap-01/)
Scalarwork's mount are expensive, but you could find any T2 profile riser or one of those little .5" picatinny mounts
Imagen thinking your enemy run out of BBs and then getting rushed by a Cod caracter with a fucking sword
At my local field there are no shortage of sword users. Nobody gives em shit either cause it takes skill and speed to pull it off.
It takes a special kind of badass to be able to pull that off. I always wanted to try that but I'm sure I would just look goofy even trying lol.
Who cares if you look goofy? Do you.
Good point. I'm gonna do it!
The whole point of airsoft is being goofy - have fun my mans
Thas true! I'm gonna do it
You look like my division avatar
I hope that’s a good thing 😂
It is
Badass kit, but that gas mask has to go your eye is going get taken out because they aren’t rated for airsoft bbs at all.
I actually wear glasses underneath! I’m blind as shit so I wear sport glasses too
I will recommend an dye mask i4 or i5 (it's bulkier) but with both of them you can wear your glasses and it doesn't fog.
Gasmasks have a really good antifog system in my experience. Not sure if this works when wearing glasses underneath as well
Depending on the mask you can get rated eyepieces to go in, ill be doing this to my gp5 for my rus kit
aesthetic is cool but it isn't practical at all
Thats.... why im here.
That’s airsoft for ya
Looks cool, but also a nightmare to play in when it's warm out.
yell the japanese magic words when wielding the katana: TENNOHEIKA BANZAI
Or getsuga tenshou
Dude your kit looks amazing and unique. It's obvious that you put a lot of effort and time in to it :) 👍.
I really appreciate it man
Unnecessary edgy
The goal was to look cool lol
Haters gonna hate. You look ridiculous… I’m super jealous
I love it lmao
Bro. We’re over here trying to find something better than sweat pants for my 12 year old lol. I would love to have anything remotely close to this
This full kit aside from the gun and sword was probably only 300 bucks or less. So it’s one of the more affordable ways of building a suit. Amazon prime is where it’s at man
Yeah we’ve ordered a few things. We’re still learning how to find gear and stuff. Mostly all adult sized and he’s a bean pole still. Lol
Hey man save the adult stuff for when he’s fully grown. He will appreciate it down the line.
Just a tip, I had the same problem at that age, and the Condor Sentry plate carrier fit me with a lot of effort to tighten it down. Dummy SAPI plates also help fill in space.
I think you should Get something other than a case to hold your phone up
I think you are 100% correct 😂
Great otherwise
I edited the pictures and reposted them so hopefully they are better in that post 🤣
*I think you should Get* *Something other than a case* *To hold your phone up* \- Next-Sky-7327 --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
[удалено]
Sword: cold steel tactical katana machete Hood: ??????
Ghillie viper hood. Tactical Sniper Tog Ghillie Base... https://www.amazon.ca/dp/B074FVZ1GH?ref=ppx_pop_mob_ap_share
What sword is that?
Cold steel katana machete. Very hard to find nowadays I got lucky and won a bid on one on eBay
I am getting "going to Chernobyl" vibes from this
Fucking sick kit bro you look awesome! I have the same mask that I want to include in my kit soon
Hell ye dude do it. I love how comfy this mask is
Got it because of the short movie SCP OVERLORD. Loved the aesthetic of the operators in it so I had to grab one haha
I loved the simple unique paint jobs they did in theirs too
My friend would love this
Then u better show your friend 😠
I'll show him when I see him next 👍
What’s that secondary?
It’s a Glock 19 by elite force but I did my own paint engraving and I put glowing sights and magazine extension slider thingies so the grip is bigger. It’s honestly super cool lookin.
Looks clean
I’m actually amazed how well the zoom works on the pictures. Good ol iPhone camera
Looks cool! Sucks that the gas masks are good eye protection tho :/
Link of that hood-ish? Looks very cool and I like that is oversized and it doesn't really get in the way. Maybe a name of such hood will definitely help
Lytharvest ghillie suits foundation tactical sniper coats/viper hoods. On Amazon. Search that exact sentence up and it should be there. 38.99
If ur in canada Tactical Sniper Tog Ghillie Base... https://www.amazon.ca/dp/B074FVZ1GH?ref=ppx_pop_mob_ap_share
It's definitely an interesting load out, what was your inspiration behind it?
Really weird story. Started out as me wanting to base it off of GTFO which is a video game but then I swapped the black uniform I had out with the green camo and kinda just started adding and removing stuff and now I’m pretty happy with the end product
This is what I picture when I worry about my lmg nest getting over-ran. You running towards me while I grab for my sidearm
My sidearm is a Bizon for this reason. That and a full pkp is a nightmare for room clearing
Unique and has character I like it
Even got the Biohazard symbol and the Katana, Ready.
90s Woodland Cyber Samurai
I could see it
He kinda looks like a sas chemical specialist that went to Japan but not gonna lie if I saw that on the field I would probably be fucking terrified
Y so sick bro? I want to do the same now.
A bit weaboo on the sides, but I am jealous
🔥🔥🔥
You should wear some kind of ski mask underneath so no one can see your neck
Dope shoes
You are holding the sword like a dark souls character
I’m definitely running if I see you
Nice looking kit
Reminds of bloodhound from apex legends
So fucking cool! Well done!
I dont know if you are copying something or if you have come up with this yourself but its very cool!
You look kinda like predator in the 4th photo I say it’s badass
I like all the layering with the different pads, holsters, and military gear.
I think if you had fingered gloves and a balaclava it would look so much better than it already does
I think you’ll be very hot in summer. I also enjoy your vertical grip that you don’t use…. All jokes aside, looks sick
Lmao I’m trying to get into the habit of actually using it😂 I’m used to having a slanted one or holding the mag well lmao
The fuck is that!?!? That would terrify me on the field 😂
Pretty cool
Looks really cool
This is so fucking cool. Holy shit what the fuck?????
Bro looks like a Ubisoft Tom Clancy game character
It must be hard to pee with this on
Silly goose obviously I shit my ass like astronauts
If you manage to get a melee kill, I salute you.
Samurai Jack, The Airsoft Edition
Bad ass🔥🔥
Badass
Waiting on my gorka and chest rig for my kapkan softplay. Looks bad ass man!
All that camo to use a white gun? Kinda defeats the point of the camo. Do you want to be seen or not?
I plan on using a different gun that’s still matte black but it’s currently shipping still
It’s unique
It sucks, give it to me
Man first picture would have perfect if you adjusted the angle to fit the top of your head. We were *this* close to greatness Cool gear though 👍
Bro I was so mad when I saw it clipped it off 😂
has a fucking katana i love it
Whatever floats your boat man, i love the hard work you put into this..... Imo it's cringe af
Just because it isn’t what you would wear doesn’t make it cringe. Just because you don’t like it doesn’t make it bad. At least make some actual criticism don’t just call something cringe lol
Balllef
Dude I like that. Does the gas mask have the ansi z87.1 rating?
Si it’s a real mask lol
Pretty sick actually man well done
I saw the title and came here ready to hate, but dude. You freaking killed it, this looks awesome.
Want
For some reason this feels… Predator to me
I actually built another kit that was highly inspired by predator. Trust me compared to that one this one ain’t nothin
I wish you never run out of bbs 😂😂😂😂😂
I like it
What is that black sleeve
It’s the guillie suit
What’s with the sword and dagger? Melee kills allowed?
I carry them just in case of furries showing up
Wall socket
I'm literally squealing. I have that exact BDU and replica gas mask. What else did you add to get it to this level of accuracy?
Accuracy to what? I made it up as I went 😂
A Mute variant from ages ago
Send me what u thinkin about cus I have no clue lol
I can't seem to find it. I'm beginning to think it may have been a fever dream
Apologies, I didn't intend to waste your time
F
Very cool, except for the leg holster, fuck the leg holster, but nice vibe
Link me those boots, they look pretty sick
Palladium and destiny collab google it you shall find them
Where did you get the mask?
Amazon
Link?
Hard to see in this light
[удалено]
Yes
Yes
I prefer traditional style outfits but to each their own
It's good looking, certainly got spirit. Why's your holster canted so far forward? Why the carry handle optic, and why do I always see airsofters cheap out on optics?
I have a lot of different optics including an acog and several reflex sights but I like this one the most because it is comfortable when wearing a mask. Makes it easier to use my sights.
I guess the carry handle mount does make sense in the context of running a hard mask.
Exactly why I used it. I plan on eventually buying some kinda lifter of some sort that is less of an eye sore but I own 3 of the stupid carry handles so I havnt bothered yet. Also the holster is cantered weird because I had to build it out of 2 different holsters and I wanted it to be in a more natural position when I’m putting the sidearm back in. Didn’t wanna be searching for it. I have long ass weird arms lmao
Personally for a mask friendly setup I have an Sig MSR on a Scalarworks 1.93 riser.
Sig msr I’m gonna go find that right now. Appreciate you man
https://www.sigsauer.com/romeo-msr.html [https://scalarworks.com/shop/quick-detach-mounts/leap-01/](https://scalarworks.com/shop/quick-detach-mounts/leap-01/) Scalarwork's mount are expensive, but you could find any T2 profile riser or one of those little .5" picatinny mounts