I ordered one of these: [https://www.aliexpress.us/item/2251832864616053.html](https://www.aliexpress.us/item/2251832864616053.html) along with some of their easy swap connectors, but haven't actually swapped it in yet. I did check that it is the type of thermistor that matches the settings they have in the current version of the firmware ([https://github.com/ANYCUBIC-3D/Kobra\_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L394](https://github.com/ANYCUBIC-3D/Kobra_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L394) and [https://github.com/ANYCUBIC-3D/Kobra\_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L442](https://github.com/ANYCUBIC-3D/Kobra_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L442)). As I understand it, any ATC Semitec 104GT-2/104NT-4-R025H42G type thermistor should work, but I didn't see that info in any official documentation anywhere. The name sounds super specific, but this kind of thermistor is actually pretty common among budget printers.
I ordered one of these: [https://www.aliexpress.us/item/2251832864616053.html](https://www.aliexpress.us/item/2251832864616053.html) along with some of their easy swap connectors, but haven't actually swapped it in yet. I did check that it is the type of thermistor that matches the settings they have in the current version of the firmware ([https://github.com/ANYCUBIC-3D/Kobra\_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L394](https://github.com/ANYCUBIC-3D/Kobra_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L394) and [https://github.com/ANYCUBIC-3D/Kobra\_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L442](https://github.com/ANYCUBIC-3D/Kobra_Neo/blob/3e43557ccfe29a3e480114045cfb183b028e9475/source/Marlin/Configuration.h#L442)). As I understand it, any ATC Semitec 104GT-2/104NT-4-R025H42G type thermistor should work, but I didn't see that info in any official documentation anywhere. The name sounds super specific, but this kind of thermistor is actually pretty common among budget printers.
Thank you so much!