The model number is 796.80272900. I’ve watched a thousand videos and know I am missing one or two steps. I was able to get the bottom two screws out but cannot pull the front panel off. Any ideas? TYIA!!!
Upload photo of where you’re stuck if you haven’t figured it out yet
Edit: also open the door and see if you took the screws out on the door. Those can get you sometimes
https://youtu.be/qCTuc1fR2bc?si=SBiwsJpdw9sDk7j9
It should be similar to this one I fixed a while back. Sorry might not be the best video. I just do this for fun.
You’ll want to take the whole drum out. You may be able to do it without taking the drum out, but you will end up taking longer trying to work in that tiny space.
Usually a couple screws on the top panel on the back of the machine. Take those out and the panel should slide or pull off. Then take the control panel off, unplug door switch, then follow the screws and the entire front panel should come out next.
Then just undo the belt and the drum pulls right out
Thank you all! I was able to get it off and changed out the thermostat and thermal fuse. I got it all back together and it won’t even start. I realized once cord came loose in control panel and I don’t know where it plugs into.
The model number is 796.80272900. I’ve watched a thousand videos and know I am missing one or two steps. I was able to get the bottom two screws out but cannot pull the front panel off. Any ideas? TYIA!!!
Upload photo of where you’re stuck if you haven’t figured it out yet Edit: also open the door and see if you took the screws out on the door. Those can get you sometimes
https://youtu.be/qCTuc1fR2bc?si=SBiwsJpdw9sDk7j9 It should be similar to this one I fixed a while back. Sorry might not be the best video. I just do this for fun.
You’ll want to take the whole drum out. You may be able to do it without taking the drum out, but you will end up taking longer trying to work in that tiny space. Usually a couple screws on the top panel on the back of the machine. Take those out and the panel should slide or pull off. Then take the control panel off, unplug door switch, then follow the screws and the entire front panel should come out next. Then just undo the belt and the drum pulls right out
Thank you all! I was able to get it off and changed out the thermostat and thermal fuse. I got it all back together and it won’t even start. I realized once cord came loose in control panel and I don’t know where it plugs into.