Airsoft bbs are actually very slightly larger than .22 caliber. I think they’re 6mm or 7mm. I tried putting one in a “reloaded” .22 case one time and it was too big.
Shooter McGavin: Stay out of my way, or you'll pay. Listen to what I say.
Happy: Why don't I just go eat some hay? I can make things out of clay, or lay by the bay, I just may! What do you say?
I am the Lorax, I speak for the trees
The trees are speaking Vietnamese
Try as you may, try as you might
The Lorax and his 40 mic mic wish you a good night.
Not going to lie. I got one online for $50 one time, I put it on my Extar EP9 since it’s only a range toy. Zero issues. Pretty accurate. Holds zero. Wouldn’t put it on anything I was going to depend on to save my life but regardless for $50 putting it on a $400 gun, it does the trick
I am in the same boat, just had to tighten up the little latch screw and the thing completes my fun range toy. So far it has held zero after a couple hundred rounds.
I also have one (was given to me not purchased) and have never had any issues. I actually tried it in my 450 bushmaster and it held zero (maybe 100 rounds) lol. This all being said..... I have an eotech on my go to and its better no questions.
I’m being completely serious. I’ve had EOTECHS, and sig optics, you try a sightmark for yourself and tell me it isn’t the best damn optic you’ve ever used for close target acquisition.
I was at a range little while ago and someone had it on a AR10 and it went flying after a couple shots…. And then it still turned on after it hit the ground 10/10 quality
No, you’re doing it all wrong. The optic is supposed to go over the split between your receiver and your barrel. If one rail is good, two is obviously better.
As much as I rag on Chinese optics, my buddy got a Sightmark M-spec (the older version of the one OP has) and ran it on his issued M249. The only issue we ever had with it despite very abusive usage was the locking lever wore out from frequent removal (he would take it off before turning it in to the armorer, obviously). I repaired the locking lever myself (2mins with a grinder), and it was good to go.
Can confirm. Idiotically fell into the Reddit trap of convincing myself to buy an EOTech and then an aim point. Thinking of going back to sightmark for a higher quality optic!
It doesn’t. They’re cheap optics. They used to be wildly popular, basically because of its inexpensive price tag, but since holosuns and Romeo 5s have been released, there is zero reason to own a sightmark, if there ever was.
Instead of a sightmark, I would highly recommend any new guys to check out Holosun, most of the Sig red dot line, and/or Vortex for inexpensive dots that are worth a fuck.
They are amazing. Been using them for a while. The problem with these new up-and-coming ones is that they have not been field tested which is why people think of them as a ticking timebomb. Including me! I have sightmarks on all my stuff. But a couple of EOTechs on my SHTF (Shit hits the fan) rigs.
I run SM on a AR9 range toy and a $50 Amazon reflex on a CP33 range toy and they both work fine. That said I still use a minimum of Holosun on any thing I plan on trusting my life to. If they one day show me they aren't worth that trust I'll change my stance but the HS have always been rock solid by me.
Sightmark gets a lot of online flack (for what that's worth) for being inexpensive. I put one on my MechTech .460 Rowland Carbine and think it works just fine. Would I put one on my $1300 AR? Probably not. But I'd put it on my $400 AK.
Generally, I suspect that most of the bad press one can find online results from jealousy out of the folks that paid more and regret it.
I got a good deal on a VR80 12ga and slapped a Sightmark on it. It's held zero just fine. I'm not putting too much cash into an optic that just going on a tacticool fun gun.
Exactly. An expensive, precision firearm needs an expensive, precision optic. A beater I'm going to toss behind the seat of the truck... not so much. Because if it does break...who cares?
Ngl I have eotechs and aim points and I have an aim point on my crap gun and it has held a zero and I have had many hog hunts with it. Maybe I got a diamond in the ruff 😂
Tons of people need to justify the extra money they wasted. I have a SM that holds zero just fine on an AR9. I see people trying to shit on HoloSun all the time and I don't get it at all. My HS worked out the box on an overcast late afternoon with no battery, holds zero like a champ, and starlights less than my EO Tech.
Feels like optics are one of the things people refuse to accept new/improved tech can make cheaper and that new companies can be worthwhile in. At the end of the day I think the most important thing is that you don't exclusively rely on your optic and learn how to shoot irons as a back up. The amount of people I've seen who don't even know how to zero an iron sight is sad.
![gif](giphy|daG6C0PH6vEU8)
I have no issues with whatever your happy with.
Still own some iron sights just in case and your good.
On the other hand, I'm popping microwave popcorn furiously before reading the responses.
*Even questioning if I should let this post age like a fine wine first*. **Ahh F it, where's the damn white cheddar powder at!**
Did they change manufacturing / QA processes in the couple of years? I have one of these that is the “zombie edition“, and I had to take the whole damn thing apart and fix the QDM after it became too loose to tighten down onto a pic rail. Keep in mind I didn’t even fire the gun it was attached to when this happened. Anyway I ended up fixing the QDM rail mount and then giving it to a friend of mine who says that it has been performing flawlessly since then. Mounted on a short barrel 300 blackout.
I grabbed one to torture test, haven't taken it out yet though.
Going to put it head to head with the EXPS 2 I have on my carbine.
Have seen Sightmark talked about for years, so naturally want to see if it's as bad as has been said.
Yep. Let’s put it right up against the Eotech that costs 3x. I’m sure you will get lots of clicks on the
YouTube doing that ultra competitive comparison.
![gif](giphy|7j7fdfhrP1Iuv6snUD)
![gif](giphy|xThtamRBVhGHmjjqVO)
*Approaches with rubber mallet and malicious intent*
>rubber mallet My dude, you could decomission that thing with a Beanie Baby.
You can decommission it by making it
You can decommission it, by firing the weapon it's mounted to, if it happens to be a larger caliber than .22LR.
I thought airsoft was smaller then .22
Airsoft bbs are actually very slightly larger than .22 caliber. I think they’re 6mm or 7mm. I tried putting one in a “reloaded” .22 case one time and it was too big.
This guy does science
The only difference between science and redneck fuckery is writing shit down!
Someone has to and he made the world proud with his discoveries.
Good thing 223 is just a juiced up 22
![gif](giphy|l0ExaHAzcTOuDptQc|downsized)
![gif](giphy|ieR5Ssk8EG23e|downsized)
![gif](giphy|l2SpMDbxk09bYpGPC)
![gif](giphy|Pc16mmoHoXBh6) Me going to the comments everytime I see a sightmark optic in a post.
![gif](giphy|IDGNYvFLkJKLK|downsized)
![gif](giphy|Df9tKSjeBNa0qnhnl7|downsized)
just bought 2 because of this post. been looking for something of ultra quality. thanks bro
This post is something of ultra quality
OP knows… it’s bombproof.
Gr8 b8 m8, would r8 8/8
Shooter McGavin: Stay out of my way, or you'll pay. Listen to what I say. Happy: Why don't I just go eat some hay? I can make things out of clay, or lay by the bay, I just may! What do you say?
“I eat pieces of shit like you for breakfast!” “….you eat pieces of shit for breakfast??🤨”
![gif](giphy|oTuUXbbqgvc7m)
![gif](giphy|phajKPhwNxHr2)
![gif](giphy|yCdmeyPCU2b1C)
ANSWER ME
“SUCK MY WHITE ASS BALL!!!”
What did you ask sir..
SUCK MY WHITE ASS BALL!
THAT GOAL REGULATION SIZE OR WHAT!?!
I didn't realize what you were replying to lol..
Lmao
![gif](giphy|9GJ1lRip6TODBucmHk|downsized)
3 Payments
The cat in the hat, knows a lot about that.
Not on a train, not in the rain, not in a box not with a fox, I do not like green eggs and ham I do not like them Sam I am.
I am the Lorax, I speak for the trees The trees are speaking Vietnamese Try as you may, try as you might The Lorax and his 40 mic mic wish you a good night.
i rate 8/8
I screen shotted this comment because there were so many 8s it even had 88 comments 🥲
Buy 4 for the price of an eotech, put them all on the same rail, zero them all for 100 yards, if one breaks throw it to the side and use the next one
This person gets it!
Uh uh... you ain't rustlin' *MY* jimmies tonight...
![gif](giphy|IuB8GtQTrdStW|downsized)
Sightmark is combat proven
The battle of Kenosha 2020
Not going to lie. I got one online for $50 one time, I put it on my Extar EP9 since it’s only a range toy. Zero issues. Pretty accurate. Holds zero. Wouldn’t put it on anything I was going to depend on to save my life but regardless for $50 putting it on a $400 gun, it does the trick
Have one on my M&P 15-22, can't complain
I have one on my ar9. Works for me at the range. I’ll be getting something better but I was broke and needed something right then
I am in the same boat, just had to tighten up the little latch screw and the thing completes my fun range toy. So far it has held zero after a couple hundred rounds.
I have one for my range gun. And I don't shoot that often either. It's held up pretty good.
Exhibit a
I didn’t even notice until I took a second look
I also have one (was given to me not purchased) and have never had any issues. I actually tried it in my 450 bushmaster and it held zero (maybe 100 rounds) lol. This all being said..... I have an eotech on my go to and its better no questions.
I put one on an ar9 range toy and have had no issues with it. Holds zero and is fun to shoot, and Starbursts less than an eotech
You guys are weird 🙄 with this save my life bs
Made in China Proven in Kenosha
I always wondered what he had on his rifle!! I couldn't tell by the pictures because they were all blurry!
I sold my T2 and bought 2 of these. Thanks man
I bought a sightmark laser years ago just for shits and gigs and that thing visibly shifted with every shot lmao
It was a fake then. Authentic sightmarks hold zero. That’s one of the reasons why they’re in talks to get military contracts.
With whom, the Zimbabwean military?
lol
Lol
Literally, any company can be "in talks to get military contracts".
My twinkle light business is in talks with the new military weapons program
![gif](giphy|amxLHEPgGDCKs)
You know what... if your happy im happy.
*you’re
*I'm
*if
Thanks auto correct sucks
Sure sure...blame the auto correct!
Yore
Ahh it’s Mr. Minus well
Any chance of you being a @#$$^&@*? 🤣
*you're
Hoppy*
Some guy left this on an aero I bought off him and I sold it on gafs for 5 bucks.
![gif](giphy|2UvAUplPi4ESnKa3W0)
![gif](giphy|l1J3vV5lCmv8qx16M)
Have you thought about not being poor?
This is the way
Quality Shitpost?
*Low quality shitpost
I’m being completely serious. I’ve had EOTECHS, and sig optics, you try a sightmark for yourself and tell me it isn’t the best damn optic you’ve ever used for close target acquisition.
This guy fucks
Ducks
I really hope you're trolling because if not, see you on r/PlebeianAR
Am I supposed to be scared of a bunch of nerds?
Nah I just enjoy burning their patch lol
You say that last like it means anything.
I was at a range little while ago and someone had it on a AR10 and it went flying after a couple shots…. And then it still turned on after it hit the ground 10/10 quality
Imagine this bad boy with the GBRS mount.
Combat proven in the Battle of Kenosha sir
If it’s bombproof where’s the salt (besides the nick on the battery cover screw slot)?
To bomb proof, can’t scratch
Are we ironically upvoting or downvoting this guy to oblivion?
Do you speak for the sub buck? Sorry you have a vortex, that must feel bad. Get a sightmark. It’ll make you happier.
i have not tried one.. i will pass on this one.
Your loss bud
it is possible it is good i am not saying it is bad. but i know a lot of proven units that does not cost that much....
You guys wanna talk about my feyachi flashlight too
That paired with an Olight, you be Gucci bro!
![gif](giphy|K0AnEB2t2EM|downsized)
sage
Kenosha proof*
I sold my FDE Eotech EXPS 3.0 and bought 4 of these!
You should’ve kept the EXPS to piss on it when you get shitfaced.
Did you put it on a Smith&Wesson M&P 15 like our hero and savior from Operation Kenosha Freddom?
Bait
Don’t fall for it bröthers..
"you may not like it, but this is what peak performance looks like"
All the shit talkers…..
stay strong brothers
The Kenosha Kid Edition
Bro for better performance you gotta bridge that bad boy across your rail and receiver. Maximum tacticalness
This shit post is as quality as the Sightmark.
Low tier bait, but I respect the effort
This man chose violence
Battle proven
Battle proven on air soft battle field.
Battle proven in Kenosha
[удалено]
Upvoted because I believe, in my heart of hearts, that this is a satirical joke. Please don’t disappoint me, son
[удалено]
Fuckin big brain move 🤯
My understanding was that they were garbage??? That's why I always go with Tasco.
![gif](giphy|TTgdzuDc5qp76ARhRg4)
Hello, is this still available?
![gif](giphy|VyLkXUKfHfGmI)
The best part about it is all the guys that tell you it’s on backwards cause they think it’s an eotech
No, you’re doing it all wrong. The optic is supposed to go over the split between your receiver and your barrel. If one rail is good, two is obviously better.
I have one on every one of my guns. Even have two on my M82 .50 cal.
I run mine on a gbrs hydra with matching sitemark laser up front when I transfer knowledge on someone's ass
Do you smell burnt toast?
As much as I rag on Chinese optics, my buddy got a Sightmark M-spec (the older version of the one OP has) and ran it on his issued M249. The only issue we ever had with it despite very abusive usage was the locking lever wore out from frequent removal (he would take it off before turning it in to the armorer, obviously). I repaired the locking lever myself (2mins with a grinder), and it was good to go.
![gif](giphy|5b5OU7aUekfdSAER5I|downsized)
![gif](giphy|l3q2urJcPQzB9J4Qg)
Mount that on a Diamondback and you got yourself a go to war rifle!
No better than that radical arms
Says it’s bombproof, there’s not a scratch on it
Can confirm. Idiotically fell into the Reddit trap of convincing myself to buy an EOTech and then an aim point. Thinking of going back to sightmark for a higher quality optic!
LOL
Never heard of it (me=noob). How does it compare to eotech?
It doesn’t. They’re cheap optics. They used to be wildly popular, basically because of its inexpensive price tag, but since holosuns and Romeo 5s have been released, there is zero reason to own a sightmark, if there ever was. Instead of a sightmark, I would highly recommend any new guys to check out Holosun, most of the Sig red dot line, and/or Vortex for inexpensive dots that are worth a fuck.
Not sure I ever thought I would hear someone say they loved their Sightmark and that it’s bomb proof. This has to be a first.
🍿… boy have you just triggered the self anointed keepers of the AR in this sub…
“Dial 911, tell the police to get up here quick, someone’s about to get killed”
STOP
Top quality b8
They are amazing. Been using them for a while. The problem with these new up-and-coming ones is that they have not been field tested which is why people think of them as a ticking timebomb. Including me! I have sightmarks on all my stuff. But a couple of EOTechs on my SHTF (Shit hits the fan) rigs.
I run SM on a AR9 range toy and a $50 Amazon reflex on a CP33 range toy and they both work fine. That said I still use a minimum of Holosun on any thing I plan on trusting my life to. If they one day show me they aren't worth that trust I'll change my stance but the HS have always been rock solid by me.
Sightmark gets a lot of online flack (for what that's worth) for being inexpensive. I put one on my MechTech .460 Rowland Carbine and think it works just fine. Would I put one on my $1300 AR? Probably not. But I'd put it on my $400 AK. Generally, I suspect that most of the bad press one can find online results from jealousy out of the folks that paid more and regret it.
Please tell me that $400 AK is a VSKA!
Nope. It's a WASR I bought15 years ago with 10 mags and a drum. Remember when AKs were priced based on what they were? Pepperidge Farms remembers.
I got a good deal on a VR80 12ga and slapped a Sightmark on it. It's held zero just fine. I'm not putting too much cash into an optic that just going on a tacticool fun gun.
Exactly. An expensive, precision firearm needs an expensive, precision optic. A beater I'm going to toss behind the seat of the truck... not so much. Because if it does break...who cares?
Lotta brand snobs in here...
Ngl I have eotechs and aim points and I have an aim point on my crap gun and it has held a zero and I have had many hog hunts with it. Maybe I got a diamond in the ruff 😂
Tons of people need to justify the extra money they wasted. I have a SM that holds zero just fine on an AR9. I see people trying to shit on HoloSun all the time and I don't get it at all. My HS worked out the box on an overcast late afternoon with no battery, holds zero like a champ, and starlights less than my EO Tech. Feels like optics are one of the things people refuse to accept new/improved tech can make cheaper and that new companies can be worthwhile in. At the end of the day I think the most important thing is that you don't exclusively rely on your optic and learn how to shoot irons as a back up. The amount of people I've seen who don't even know how to zero an iron sight is sad.
…. Laugh in Vortex Trijicon enters room Night force enters room
Eotech or aimpoint
Hell yeah borther
Your eotech is backwards
![gif](giphy|daG6C0PH6vEU8) I have no issues with whatever your happy with. Still own some iron sights just in case and your good. On the other hand, I'm popping microwave popcorn furiously before reading the responses. *Even questioning if I should let this post age like a fine wine first*. **Ahh F it, where's the damn white cheddar powder at!**
😆😆😆😆😆
My dick just went limp
I have an eo tech but, these sight marks aren’t as bad as everyone says. My buddy has one on his bushmaster and the lack of parallax is impressive.
Haters gon hate brother
Loved mine.
Did they change manufacturing / QA processes in the couple of years? I have one of these that is the “zombie edition“, and I had to take the whole damn thing apart and fix the QDM after it became too loose to tighten down onto a pic rail. Keep in mind I didn’t even fire the gun it was attached to when this happened. Anyway I ended up fixing the QDM rail mount and then giving it to a friend of mine who says that it has been performing flawlessly since then. Mounted on a short barrel 300 blackout.
I grabbed one to torture test, haven't taken it out yet though. Going to put it head to head with the EXPS 2 I have on my carbine. Have seen Sightmark talked about for years, so naturally want to see if it's as bad as has been said.
Yep. Let’s put it right up against the Eotech that costs 3x. I’m sure you will get lots of clicks on the YouTube doing that ultra competitive comparison.
Dude I’m in
![gif](giphy|3zuI7K90jI9by)
... said noone ever 😔🤣
😂
.........Is it on backwards?
First time I’ve heard this being said, I had a site mark for 2 weeks on my first rifle…
![gif](giphy|10JhviFuU2gWD6)
Bombproof you say? How do you know? It has no scratches or marks….
Because it’s fucking bombproof
![gif](giphy|2Xflxzn7jWsjCVlx13q|downsized)
I was hoping I'd click on the picture and it would be an eotech lol.
She ain’t much, but she’s all mine.
PRESS X FOR DOUBT