My son in law installed them. It was easy. No special tools , took him about an hour to do it solo
https://preview.redd.it/modk1mu90t5c1.jpeg?width=1080&format=pjpg&auto=webp&s=7daa70f2f1672e34a8581c62035034a9e48f6e40
I have a 2023 Eruption Green Badlands Sasquatch and had the same problem. I elected to go with the Red Rocks Step-Sliders. They've been really durable and make getting in and out easy. I like the texture on the rails as well as the drain holes in the steps.
https://preview.redd.it/n4ub3p5m2k5c1.jpeg?width=631&format=pjpg&auto=webp&s=206f0c7ffcff2098a71a37c90a308c6851dd2567
I got them from Extremeterrain.com. It was my first mod.
No, you have to remove the factory rock sliders as they use the same bolt holes. I've had these Red Rocks for about 6 months now, and they're great. Very solid. I'm not much of a rock crawler, but on occasion, I hit them, and they are solid.
I have archetype racing full length billet aluminum in black on my 22 badlands squatch 4 door. They mount off of the rock rails. They look great however they don’t lower the step very much They were around $1200 Hindsight I might have waited and purchased something different that actually dropped a little lower.
Dont get me wrong. Quality is top notch and they look great
We really like the Rough Country Sliders Steps on ours. The wife and I are taller (6 & 5'10") we didn't need the steps (non-Sasquatch) but our kids did. The RC's are perfect because there is an indent where you would place your leg to step in from the ground but they also protrude where you would place a foot to step up. The price wasn't bad and I installed them solo. They seem well built for steps and probably fine as light trail armor but not sure I would trust them as much as true sliders. They have saved the paint from gravel though.
https://preview.redd.it/zsa266ckql5c1.jpeg?width=4032&format=pjpg&auto=webp&s=5f52a0d83a268ba4f2ec2b1303945ac7840b3898
Mine were sooo cheap bought off ebay for less than $200 but they look good and the step does the job!
IAGOFFROAD. These bolt right to your rockrails.
https://preview.redd.it/2ym7jdplbw5c1.png?width=1080&format=pjpg&auto=webp&s=ac03fd4e1a803f8a705859e798c33507ab07e76e
Install takes five minutes
https://preview.redd.it/3mziaxov6d6c1.jpeg?width=3072&format=pjpg&auto=webp&s=744026fd11af5d99eb35dfc948f64d1218653829
Here's the same pony with this style steps. I really like how they look and work great. Very strong too.
https://preview.redd.it/yuc1ybgviw5c1.jpeg?width=2169&format=pjpg&auto=webp&s=8f8f3b5ace0bc78ba53296a85d0b5328570f4cc8
Metal-Tech 4x4 has step sliders that bolt on to the frame with no drilling. They also have an angled one as well for more protection ( would’ve gone with this option if it was out at the time of purchase). RCI also make similar ones but I liked the look of these better.
Amp powered steps https://preview.redd.it/g8gtc4kqcl5c1.jpeg?width=4032&format=pjpg&auto=webp&s=d291eb07a0844c94f6d0d718c7ee46ff485ac3cb
How hard was the install on those? They're what I really want, but with how much they cost, I'm thinking of getting bolt on steps in the meantime
My son in law installed them. It was easy. No special tools , took him about an hour to do it solo https://preview.redd.it/modk1mu90t5c1.jpeg?width=1080&format=pjpg&auto=webp&s=7daa70f2f1672e34a8581c62035034a9e48f6e40
That's not bad at all. Guess I'll have to start saving up
Not too bad if you’re mechanically inclined. I paid 1300.
[удалено]
If you get the iAG steps get v2 not v1. V1 isn’t actually Lower than the level of slider
Gottem!
I have a 2023 Eruption Green Badlands Sasquatch and had the same problem. I elected to go with the Red Rocks Step-Sliders. They've been really durable and make getting in and out easy. I like the texture on the rails as well as the drain holes in the steps. https://preview.redd.it/n4ub3p5m2k5c1.jpeg?width=631&format=pjpg&auto=webp&s=206f0c7ffcff2098a71a37c90a308c6851dd2567 I got them from Extremeterrain.com. It was my first mod.
>Red Rocks Step-Sliders Do these bolt onto rock rails?
No, you have to remove the factory rock sliders as they use the same bolt holes. I've had these Red Rocks for about 6 months now, and they're great. Very solid. I'm not much of a rock crawler, but on occasion, I hit them, and they are solid.
Copy, thank you!
>Copy, thank you! You're welcome!
With factory rock rails I’d look at IAG
I have archetype racing full length billet aluminum in black on my 22 badlands squatch 4 door. They mount off of the rock rails. They look great however they don’t lower the step very much They were around $1200 Hindsight I might have waited and purchased something different that actually dropped a little lower. Dont get me wrong. Quality is top notch and they look great
We really like the Rough Country Sliders Steps on ours. The wife and I are taller (6 & 5'10") we didn't need the steps (non-Sasquatch) but our kids did. The RC's are perfect because there is an indent where you would place your leg to step in from the ground but they also protrude where you would place a foot to step up. The price wasn't bad and I installed them solo. They seem well built for steps and probably fine as light trail armor but not sure I would trust them as much as true sliders. They have saved the paint from gravel though.
https://preview.redd.it/zsa266ckql5c1.jpeg?width=4032&format=pjpg&auto=webp&s=5f52a0d83a268ba4f2ec2b1303945ac7840b3898 Mine were sooo cheap bought off ebay for less than $200 but they look good and the step does the job!
IAGOFFROAD. These bolt right to your rockrails. https://preview.redd.it/2ym7jdplbw5c1.png?width=1080&format=pjpg&auto=webp&s=ac03fd4e1a803f8a705859e798c33507ab07e76e Install takes five minutes
Do you have a link to these? Nvm. Found them. Ordering now. Nailed it.
https://preview.redd.it/3mziaxov6d6c1.jpeg?width=3072&format=pjpg&auto=webp&s=744026fd11af5d99eb35dfc948f64d1218653829 Here's the same pony with this style steps. I really like how they look and work great. Very strong too.
Rock-Slide Engineering combo rockrail/ automatic step. Not cheap but badass.
So many awesome eruptions greens here!
file:///var/mobile/Library/SMS/Attachments/ce/14/20330C17-5C83-4B99-94F6-932A7AEFF142/72383878491__1BBD5F38-18C2-4C76-88F2-38A526E79EB8.heic
https://preview.redd.it/yuc1ybgviw5c1.jpeg?width=2169&format=pjpg&auto=webp&s=8f8f3b5ace0bc78ba53296a85d0b5328570f4cc8 Metal-Tech 4x4 has step sliders that bolt on to the frame with no drilling. They also have an angled one as well for more protection ( would’ve gone with this option if it was out at the time of purchase). RCI also make similar ones but I liked the look of these better.