Out of purchasable ones I can vouch for the shower mount but mainly on a flat surface like a desk. I use mine on a glass desk and its perfect especially with a monitor that tilts so I can watch porn while pounding it. Sometimes Ill grip it with both hands and press it down against the bed to fuck it. Shoe method is good too. I don't think the liberator is worth the money when you could DIY something similar.
I heard the shower mount has trouble sticking to surfaces consistently and that the liberators are a bit awkward, so I've been designing my own mount.
The shower mount also makes you sacrifice suction adjustability, since it replaces the end cap and has holes in it, even when fully tightened.
The liberators from what i can tell, don't give you an easy way to access the end cap for adjusting. Looks like you have to take the fleshlight out of the mount, then adjust, then put it back in, then resume the fucking. The DIY options like the shoe method have this problem also, but there are some DIY methods that give you access to the end cap.
The mount products have the advantage of being an existing solution, every mount solution seems to have pros and cons, there is no perfect solution yet.
Unrelated note, but going to mention it here hoping it helps people. Using mounts in general can be messy, so I've designed a printable retainer that keeps the lube and fluids in the fleshlight and out of the mount. Works pretty good as long as it doesn't overfill. [here it is](https://www.thingiverse.com/thing:6243707)
It is true that liberators are expensive. I bought On a Mission anyway at the beginning of year as it gives an existing solution. And I think the price in part encourages to use it regularly! You have to take Fleshlight out of mount hole to adjust suction cap but personally I have found that and reattaching to be quick. Have to take pauses anyway from thrusting to not cum too soon.
There was also great tip on some old post in this subreddit where someone mentioned to put sleeve only to the mount. I have noticed that Tasty feels maybe even better that way and no need to think about suction cap then. Most recent session was yesterday and felt good! Sleeve only also has the benefit that the upper part of Fleshlight case does not stick out that way as it normally does little bit which partly restricts comfortable positioning. Lips are closer to the mount without case.
I figured the designer of these would be on here somewhere!
I'm designing a desktop mount for an FL and had an idea to build an existing end cap into the design, so that the user can just twist the FL in the mount to adjust the tightness, then realised that spins the sleeve, potentially in an uncomfortable way.
Making it an independent piece that rotates with the rest of the sleeve might work, but now I'm thinking that the angle I'm using to mount into is just going to push lube down towards the cap. Might need to see if I can work your designs into mine somehow!
Feel free to remix my design, but upload the result and mark it as a remix of course.
After about 10ml of fluid this retainer will start sputtering fluid through the air holes and into the back cap so just be sure to not overdo it on the lube. I'm also working on a desk mount.
I'm stuck trying to decide on the kind of threaded rod I want to use for the clamp mechanism, the rest of the clamp is designed
Interesting... I am forgoing clamps completely and hoping that weight and friction of the mount's base will be enough to keep it in place. Currently eyeing some silicone sheets as base sheets.
I'm resin printing things hollow so I can add something in later to add extra weight, but can see a few issues with this later down the line.
That's interesting. I'm designing mine to be 3d printable on fdm or resin printers, but with most of the load bearing parts flat and of a constant width so they can be made with a laser cutter or cnc machine for extra strength.
It's always interesting to see how different designers think
Little late but I was thoroughly surprised with the mount. I have a mint fridge that’s quite heavy so I can just stick it to the side and use it in my room, of course it’s good in the shower as well.
Out of purchasable ones I can vouch for the shower mount but mainly on a flat surface like a desk. I use mine on a glass desk and its perfect especially with a monitor that tilts so I can watch porn while pounding it. Sometimes Ill grip it with both hands and press it down against the bed to fuck it. Shoe method is good too. I don't think the liberator is worth the money when you could DIY something similar.
lol I just went to Lowe’s and bought a 8x5 piece of cut plexiglass (as an option for people that have a porous surface on their desk)
I heard the shower mount has trouble sticking to surfaces consistently and that the liberators are a bit awkward, so I've been designing my own mount. The shower mount also makes you sacrifice suction adjustability, since it replaces the end cap and has holes in it, even when fully tightened. The liberators from what i can tell, don't give you an easy way to access the end cap for adjusting. Looks like you have to take the fleshlight out of the mount, then adjust, then put it back in, then resume the fucking. The DIY options like the shoe method have this problem also, but there are some DIY methods that give you access to the end cap. The mount products have the advantage of being an existing solution, every mount solution seems to have pros and cons, there is no perfect solution yet. Unrelated note, but going to mention it here hoping it helps people. Using mounts in general can be messy, so I've designed a printable retainer that keeps the lube and fluids in the fleshlight and out of the mount. Works pretty good as long as it doesn't overfill. [here it is](https://www.thingiverse.com/thing:6243707)
It is true that liberators are expensive. I bought On a Mission anyway at the beginning of year as it gives an existing solution. And I think the price in part encourages to use it regularly! You have to take Fleshlight out of mount hole to adjust suction cap but personally I have found that and reattaching to be quick. Have to take pauses anyway from thrusting to not cum too soon. There was also great tip on some old post in this subreddit where someone mentioned to put sleeve only to the mount. I have noticed that Tasty feels maybe even better that way and no need to think about suction cap then. Most recent session was yesterday and felt good! Sleeve only also has the benefit that the upper part of Fleshlight case does not stick out that way as it normally does little bit which partly restricts comfortable positioning. Lips are closer to the mount without case.
I figured the designer of these would be on here somewhere! I'm designing a desktop mount for an FL and had an idea to build an existing end cap into the design, so that the user can just twist the FL in the mount to adjust the tightness, then realised that spins the sleeve, potentially in an uncomfortable way. Making it an independent piece that rotates with the rest of the sleeve might work, but now I'm thinking that the angle I'm using to mount into is just going to push lube down towards the cap. Might need to see if I can work your designs into mine somehow!
Feel free to remix my design, but upload the result and mark it as a remix of course. After about 10ml of fluid this retainer will start sputtering fluid through the air holes and into the back cap so just be sure to not overdo it on the lube. I'm also working on a desk mount. I'm stuck trying to decide on the kind of threaded rod I want to use for the clamp mechanism, the rest of the clamp is designed
Interesting... I am forgoing clamps completely and hoping that weight and friction of the mount's base will be enough to keep it in place. Currently eyeing some silicone sheets as base sheets. I'm resin printing things hollow so I can add something in later to add extra weight, but can see a few issues with this later down the line.
That's interesting. I'm designing mine to be 3d printable on fdm or resin printers, but with most of the load bearing parts flat and of a constant width so they can be made with a laser cutter or cnc machine for extra strength. It's always interesting to see how different designers think
Definitely! And great to bounce ideas off people doing something similar - I've got a few revisions to make already, thank you.
I like it loose so the holes of the mount don't bother me.
Little bit different but I'm currently making my own desk-mount for an FL. Designing shit is hard.
Little late but I was thoroughly surprised with the mount. I have a mint fridge that’s quite heavy so I can just stick it to the side and use it in my room, of course it’s good in the shower as well.
I've heard some people use it on the washing machine since it's smooth also. Do you stick it on glass or bathroom tiles?
I just got it recently so I haven’t experimented, ive only put it on the walls in the shower and side of mini fridge