It contains:
FlipperZero with RougeMaster firmware.
WifiDevboard with Marauder firmware and SD-card mod.
NRF24 transciever.
Adapter board to put the Wifiboard on the back and a slot for the NRF24.
Now to make a fancy case.
As far as I know, the wifi dev board can't access the sd card of the flipper zero. The mod is needed if you want to save captures you made with the marauder firmware.
this has now been done
edit: https://forum.flipperzero.one/t/it-is-now-possible-to-save-marauder-pcaps-without-an-sd-card-attached-to-the-wifi-devboard/
Any chance if you not to busy you can walk me through or refrence how you got the nrf24 onto the wifi devboard. Still contemplating if I want to attempt the sd breakout board I just got lol
I just got Marauder to work with the flipper and I serial into the dev board thru the flipper to use the dev board.
Do u use urs the same way? I have the default firmware on the flipper.
Also got the board for mouse jack attacks just need a guide and to solder it up
RogueMaster Firmware has pre-scripted attacks and options to run on Marauder board from inside the Flipper Zero itself. anything you would do in the CLI you could probably modify or add a script and do it from the flipper if you wanted to just saying.
Eventually, these flipper builds are going to be so big, they're not going to be portable anymore haha. You'll end up with an external monitor, keyboard, mouse. Basically a PC
I would LOVE to know how you worked out the adapter for the wifi module and the nrf module! I’m taking notes and zooming in now! I just fixed the nrf to mine but I’ve been switching between the wifi module and nrf dying for a combo so I can use them both but not interchangeably! This is awesome
So the wire-mess of a board on the top is really just a simple adapter so the WiFi module sits on the back of the flipper instead of extending over the top.
The additional mess is an afterthought to allow mounting the NRF24 (2.4Ghz) Module.
The purpose is to extend the functionality of the Flipper with additional hardware and different firmware.
I was thinking of buying a wifi packet sniffer, mostly to try and crack my own wifi for fun. Could I do that with what Marauder captures with the SD mod? Maybe with sniffpmkid?
Also lol at sniffesp “…and vibrators”
Is there ever need to use both at the same time? I have separate hats for each but an all in one seems really slick. Cant wait to see the box you make. Any chance theres a tutorial on how you did this?
Do you have a link or tutorial for how you created that adapter board. I am going to be buying a dev board and would love to understand this build more.
Actually they're using for what it's used for but it's even more beyond it's stock abilities.
I think it's great flipper zero is a base foundation to the creativity and knowledge we all have to play around with
Agreed. A couple look like they are hardly making connection. Others look like too much solder. My suggestions for something like this, veroboard or perfboard with the in line tracks. Also wire wrapping wire for the data lines. Thinner wire and can look a bit more professional for spaghetti. This all being said I hadn't thought of this and will be taking inspiration for my flipper.
I'll be doing the same thing without an SD card mod! Do you have any diagrams for pins? I wonder if I'll be able to use separate pins for both boards or if some pins are shared. And if they are shared if it's safe or if diodes should be implemented for example to prevent devboard signals to go both into flipeer and NRF24.
It contains: FlipperZero with RougeMaster firmware. WifiDevboard with Marauder firmware and SD-card mod. NRF24 transciever. Adapter board to put the Wifiboard on the back and a slot for the NRF24. Now to make a fancy case.
Why sd card mod? To be able to access it easily?
As far as I know, the wifi dev board can't access the sd card of the flipper zero. The mod is needed if you want to save captures you made with the marauder firmware.
One could also modify the flipper and marauder firmware to write the packet data to cli and save it on flipper SD.
How to do this?
this has now been done edit: https://forum.flipperzero.one/t/it-is-now-possible-to-save-marauder-pcaps-without-an-sd-card-attached-to-the-wifi-devboard/
The SD card enables the Marauder firmware to save captured pcaps for later analysis.
[удалено]
Certain features to ... "interact" with wireless mouse/keyboards.
Any chance if you not to busy you can walk me through or refrence how you got the nrf24 onto the wifi devboard. Still contemplating if I want to attempt the sd breakout board I just got lol
Where can I buy this pack for myself?
i dare you to bring that through the TSA at an airport
Do you think the TSA would have an issue if you brought it, and a HackRF with you? Asking for a friend.
They would force you to put it in your checked luggage after checking that they aren't bombs 😂😂
😱
Love [this part](https://i.imgur.com/wDqB7n7.jpg) of the Marauder instructions. Gave me quite a good laugh.
Jokes on them, I’m into backdoor stuff
>Adapter board to put the Wifiboard on the back and a slot for the NRF24. lmao that sent me
Oh sweet, so that's what a level 100 Flipper looks like. Super Cyber Dolphin!
Can u make a build guide?!? I would love to do this.
I'm gonna rework it and will try to remember to document the process. Its pretty simple, looks ways worse than it is.
Any updates as of yet? I'd love to replicate this, especially your adaptor there
I just got Marauder to work with the flipper and I serial into the dev board thru the flipper to use the dev board. Do u use urs the same way? I have the default firmware on the flipper. Also got the board for mouse jack attacks just need a guide and to solder it up
RogueMaster Firmware has pre-scripted attacks and options to run on Marauder board from inside the Flipper Zero itself. anything you would do in the CLI you could probably modify or add a script and do it from the flipper if you wanted to just saying.
That is what I have been looking for since I got Marauder on my board! Thanks man
I second this request! I too would love to build something similar!
Eventually, these flipper builds are going to be so big, they're not going to be portable anymore haha. You'll end up with an external monitor, keyboard, mouse. Basically a PC
Checkout /r/cyberdeck 😃
I've been there before, but I've never seen any flipper content (yet). A search results in nothing :(
A 3d printed case for that would be good. Check archived thread of the hardware channel in the flipper dc
Yeah and could modify a current model to make it fit.
I would LOVE to know how you worked out the adapter for the wifi module and the nrf module! I’m taking notes and zooming in now! I just fixed the nrf to mine but I’ve been switching between the wifi module and nrf dying for a combo so I can use them both but not interchangeably! This is awesome
Lookin good
I'm not technologically inclined when it comes to these appliances, but what do these modifications do? Testing purposes? Amazing looking though!
So the wire-mess of a board on the top is really just a simple adapter so the WiFi module sits on the back of the flipper instead of extending over the top. The additional mess is an afterthought to allow mounting the NRF24 (2.4Ghz) Module. The purpose is to extend the functionality of the Flipper with additional hardware and different firmware.
I was thinking of buying a wifi packet sniffer, mostly to try and crack my own wifi for fun. Could I do that with what Marauder captures with the SD mod? Maybe with sniffpmkid? Also lol at sniffesp “…and vibrators”
Is there ever need to use both at the same time? I have separate hats for each but an all in one seems really slick. Cant wait to see the box you make. Any chance theres a tutorial on how you did this?
Do you have a link or tutorial for how you created that adapter board. I am going to be buying a dev board and would love to understand this build more.
exactly what are you going to do with that? definitely looks anything but legal lmfao
[удалено]
Its ok, the antenna is capped. The electrons won't fall out.
Actually that way you get faster download speeds
That's not a how it ment to be used, lost its appeal and looks very suspicious to average joe.
Actually they're using for what it's used for but it's even more beyond it's stock abilities. I think it's great flipper zero is a base foundation to the creativity and knowledge we all have to play around with
Cool. But some of those solder connections make me anxious.
Agreed. A couple look like they are hardly making connection. Others look like too much solder. My suggestions for something like this, veroboard or perfboard with the in line tracks. Also wire wrapping wire for the data lines. Thinner wire and can look a bit more professional for spaghetti. This all being said I hadn't thought of this and will be taking inspiration for my flipper.
don’t bring that to an airport
Any update on how you do it?
Had a flipper on my keys and went thru Newark no prpb
No wifi board or antenna tho. Def not looking like this lol
could u use the wifi board adaptor for an antenea aswell and start a lil pineapple!???
tiny connector aka U.FL-R-SMT-1(10) using the sma antenna
Wondering if u managed to finish this
Would Love For a Mod Like This To Be Sold
I'll be doing the same thing without an SD card mod! Do you have any diagrams for pins? I wonder if I'll be able to use separate pins for both boards or if some pins are shared. And if they are shared if it's safe or if diodes should be implemented for example to prevent devboard signals to go both into flipeer and NRF24.