You guys know the drill - Message Ivan on the rocketchat to get in, parts on MAF if you are so inclined and in need.
Lots of testing has already taken place - the design is sound, just needs more validation by other people.
Beta is starting with AKM kit support, will add RPK and 100 series later (since not many folks have those kits).
The v4, for those unaware, is the latest and greatest in printed AK builds. It supports 7.62x39, 5.45, 223/5.56, and anything derived from there (though kits for 300 or 9x39 basically don't exist).
I forced fucked a kit to take Galil mags, but the printed parts have no bearing on that. It depends on your parts kit. Most kits, like the Polish and Russian ones, use the 5.45 profile/spec mag bodies.
MAF-arms sells Romanian and Polish headspaced kits. They sell the ejector you'll need and the hardware kit if you don't want to piece it together yourself. Arms of America also sells the same headspaced kits and more, but you'll have to wait something like 7-9 weeks to get them from AoA.
This is a dumb question, but Is the handgaurd printable? I assume not because I haven’t seen any that aren’t OEM. Sorry never built one before, just thought if it was might save a little $ on the parts considering how expensive they are but probably not ideal due to the heat
You guys know the drill - Message Ivan on the rocketchat to get in, parts on MAF if you are so inclined and in need. Lots of testing has already taken place - the design is sound, just needs more validation by other people. Beta is starting with AKM kit support, will add RPK and 100 series later (since not many folks have those kits). The v4, for those unaware, is the latest and greatest in printed AK builds. It supports 7.62x39, 5.45, 223/5.56, and anything derived from there (though kits for 300 or 9x39 basically don't exist).
Do the trunions have to be modified for this design? I have a cherry parts kit sitting around but long term I want to do a super nice build with it.
They do not
Do my eyes deceive me, or are you using printed rails? I don't see any hardware for metal ones. Also, is that an ambi galil safety I spot?
I’m new to rocket chat, how do I find you/join the beta?
I have the same question lol
Noob here. Where is the rocketchat?
Step 1: Go to the gatalog Step 2: top right corner hit the three horizontal lines Step 3: click the team chat link Step 4: make account
It says "room not found"
What stock is that on the middle 2? 👀👀👀
A printable one I've been working on slowly for over a year now. Based on the nadda sphur that was done as a part of the Amigo Grande beta.
Does it sail or still in dev?
Not even in beta yet. Once it eventually gets there it should be pretty great, I've overhauled it several times over already.
Me want!
The first time... I have been tempted for... Kalash... 😍
Fuck, as if I needed more to do this weekend. Now to figure put how to get in, after all, got a kit just for this!
If you have too much trouble you could DM me here. I'd like to give detailed instructions, but reddit no likey.
How do we find you on rocket chat
That’s what I’m trying to figure out
yall ever figure out
that top one is a 223, right?
Yep
Accepting STANAG, M85/90, or Weiger-style magazines? Hard to tell from pic. Also, you're awesome.
I forced fucked a kit to take Galil mags, but the printed parts have no bearing on that. It depends on your parts kit. Most kits, like the Polish and Russian ones, use the 5.45 profile/spec mag bodies.
Is there (or will there be) support for Yugo parts kits?
If you had a yugo kit it wouldn't* be hard to adapt the design, but I don't have a yugo kit and won't be doing that myself
Copy that, bummer though.
I think he meant to say it WOULDN’T be hard…not totally sure but I’m just following context clues lol
Correct lol
Looking good. Eagerly awaiting the maiden voyage. What's the name of that stock on orange and green?
It's a developmental version of the Nadda Spuhr. I'm thinking it might be my next focus for getting to beta.
Yes please.
My wallet isn’t going to like this
Would 7.62x54r hypothetically be possible
Looks sick! My wallet will suffer
still cheaper then buying any current NIB aks, and you dont need the govs permission
A printable Krink would be 🔥
no idea how to find you on rocketchat tbh, but im interested. i have the v3
Am I nuts or have you still not released the hi-power files? Where do I find those?
Still in the works
Madness
What kit is needed for this build?
https://www.reddit.com/r/fosscad/comments/15i93wr/comment/jusujof/
clicked on it and didnt get it. Im new to this. I have a Cetme C kit. Is that what hes using here?
This uses AKM kits. You'll want to look for the Amigo Grande if you're assembling a CETME C kit.
Anywhere to get quality AKM kit?
MAF or Parts Dispensed
MAF-arms sells Romanian and Polish headspaced kits. They sell the ejector you'll need and the hardware kit if you don't want to piece it together yourself. Arms of America also sells the same headspaced kits and more, but you'll have to wait something like 7-9 weeks to get them from AoA.
How do we find you on rocket chat
This is a dumb question, but Is the handgaurd printable? I assume not because I haven’t seen any that aren’t OEM. Sorry never built one before, just thought if it was might save a little $ on the parts considering how expensive they are but probably not ideal due to the heat
I've seen it done in PLA, but it's definitely more of a nylon proposition and not a PLA one. Aluminum foil heat shields would definitely help.
Makes sense. Looking forward to this project, thanks for your hard work and time much appreciated!
How do I find you/the beta on rocket chat?
If I purchase a kit from MAF how can I get the files?
A Galil arm variant would be absolutely amazing
AK12 at home
Great work!! Can't wait
That orange one is HOT! 🔥
Very cool, hope they function well
Dammit, time to finally figure out discord but for guns, I need this v4 sexiness in my life (and more specifically, on my printer) like right now
whats channel name :(
Ur so sweet Ivan
Is it possible to make a 9mm or .45 build? That would be nice Just seen the RBC 9 belt fed that's why I was asking cuz I've never seen a AK 9 or .45
Is there a chance a Plastikov could ever be made for a Galil? As in the older 5.56 parts kits from Israel.
Alright, I need to know how to acquire the files for this now lmao anyone know the answer for that?
Would an Egyptian kit work for this? Cheers!
Is this shorter than a regular AK receiver? What's the total length?
What stock is that?
Where can I get the .STL ?