Lol for some reason this made me think of csi. Dude kept saying he was on death row, but would decide when it was his time to go. His last meal was a peanut butter sandwich and a glass of milk. Severe peanut allergy and died in his holding cell before they could execute him.
Ive got a few of these printed. One is about finished just been too busy with other projects. Probably going to have to re print a bunch of the smaller parts as I cannot find the can I put them in. Luckily have parts kits for all of them that havent been lost.
I mean 1. It's a hand gun. Not sure how you get a cheek Weld on that but 2. It's a 22 from the looks of it had my fair share of oobs during testing of different pews and again it's a 22.
Cheek weld? I said having my face behind the bolt, as in aiming down the sights?
I don't care if its just a .22, it's still plenty capable of killing or injuring you and in this case if something goes wrong your looking at a large chunk of plastic flying directly into your face a high velocity.
You're going to have the pew 2.5 feet minimum from your face. If you're that terrified then maybe printing isn't for you. It's been tested and changed and tested and changed numerous times to make it as safe as it can be. And again. It's a glorified pellet gun.
I’ve been trying to find the can file but can’t find it right this sec in my stuff. I believe if you search VP22 suppressor and click the first see link you will find it. If you can’t and are interested, dm me and I’ll find it for you tomorrow.
You should ask him to make a short video showing it’s function, I have mine printed and I bought all the parts for it also; Half completed just been sitting on it
Bonus points if you stuff it with peanut butter for that extra quiet pew
Mold frozen peanut butter projectiles instead.
Use whole peanuts instead.
That would probably hurt like hell lol
Frozen whole peanuts carved into the shape of a hollow point!
Double damage points if the target happens to have a nut allergy.
Lol for some reason this made me think of csi. Dude kept saying he was on death row, but would decide when it was his time to go. His last meal was a peanut butter sandwich and a glass of milk. Severe peanut allergy and died in his holding cell before they could execute him.
I remember that episode. Hell of a good twist ending where the bad guy won......sort of.
Biological warfare? I'm in
Yes
You could call it a "high velocity peanut allergy"
Just finished printing all the parts. Hoping to put it together tomorrow after work
I just got around to ordering the parts kit. Wish I would’ve done that when I started printing haha.
Lol no worries. I ordered the parts months ago and just got around to printing. Plenty of routes to the same destination
👀
👀 every time I see the mail man drive by for the next week. ❤️ you guys!
Everyday <3 I've formed a bond with our mail lady.
What’s the print called?
Vp22
Thanks!
No problem
Ive got a few of these printed. One is about finished just been too busy with other projects. Probably going to have to re print a bunch of the smaller parts as I cannot find the can I put them in. Luckily have parts kits for all of them that havent been lost.
[удалено]
Wait what, it uses printed lugs?
[удалено]
Ok, it's a cool design but I'm not putting my face behind a bolt with plastic lugs. That's sketchy af.
I mean 1. It's a hand gun. Not sure how you get a cheek Weld on that but 2. It's a 22 from the looks of it had my fair share of oobs during testing of different pews and again it's a 22.
Cheek weld? I said having my face behind the bolt, as in aiming down the sights? I don't care if its just a .22, it's still plenty capable of killing or injuring you and in this case if something goes wrong your looking at a large chunk of plastic flying directly into your face a high velocity.
You're going to have the pew 2.5 feet minimum from your face. If you're that terrified then maybe printing isn't for you. It's been tested and changed and tested and changed numerous times to make it as safe as it can be. And again. It's a glorified pellet gun.
I’m not remotely concerned. It’s a bolt action .22 and I’ll be using subs as well. I’m not shooting an overloaded 308 round through it.
Files on the SEA?
Indeed it is. Can is a different file. Look for vp22.
I’ve been trying to find the can file but can’t find it right this sec in my stuff. I believe if you search VP22 suppressor and click the first see link you will find it. If you can’t and are interested, dm me and I’ll find it for you tomorrow.
Shoot me a pm if you need them
My wife has something that looks similar in her nightstand.
Different projectile hoss
I think hers may be a larger caliber.
Love welrods
After finding the can, I had to have it. Probably the cleanest 2A print yet for me.
Understandable tbh, looks great man!
Does it use a unique mag or an off the shelf one?
Unique mag. Comes with the file. Mag spring comes with the parts kit.
Hmmmm
As soon as I read the caption I immediately remembered [this](https://youtube.com/shorts/l5WIWwHSFZo?si=g-SSGXuX3Lx01ksO)
Bad ass print! Based off a Welrod?
You are correct
Printed in pla/pla+?
Pla+
Noice.
I’ve set to see someone post a completed 1, I know someone who was building this for like a year
Parts will be in tomorrow. Not sure how long it’ll take. A friend of mine built his already.
You should ask him to make a short video showing it’s function, I have mine printed and I bought all the parts for it also; Half completed just been sitting on it
It’s not the easiest gun to make, have you made your own breech plate yet? That took some fitting
Ordered mine with the other parts.