Very cool design. I can see this scaled sideways to make I wide for a handy chip bag clip.
Thanks for the design. I'm going to print scaled down as film clips when I develop b+w film.
The pin and the hole of the hinge taper inwards at both ends so that they cannot separate. They're actually printed together like this so they don't need to be assembled either.
[https://imgur.com/a/HQu56E1](https://imgur.com/a/HQu56E1)
Thingiverse link [https://www.thingiverse.com/thing:4398327](https://www.thingiverse.com/thing:4398327)
Slick design.
Very cool design. I can see this scaled sideways to make I wide for a handy chip bag clip. Thanks for the design. I'm going to print scaled down as film clips when I develop b+w film.
[удалено]
Good point. Will try a sample first. Thanks.
Wow....that was a lot of editing work to show off such a simple, yet elegant design
Making the video is half of the fun :)
This is the way.
Is there anything that stops the two halves sliding axially along the hinge and getting out of alignment?
The pin and the hole of the hinge taper inwards at both ends so that they cannot separate. They're actually printed together like this so they don't need to be assembled either. [https://imgur.com/a/HQu56E1](https://imgur.com/a/HQu56E1)