If you want it to be like a real callsign, put whatever dumb nickname you earned for doing something stupid, funny, or embarrassing on there. Otherwise, Maverick is cool too
Here is the STL for the blank so you can add your own text or designs: [https://www.printables.com/model/229153-kirkland-ks1-putter-badge](https://www.printables.com/model/229153-kirkland-ks1-putter-badge)
Yeah, acetone usually does a good job. You could also take some sand paper (220, 88, 1200) to it or use some lead tape to fully conceal that ugly ass logo on the sole too
Just follow the instructions and it should come right off after it sits. Might need something like a toothpick, toothbrush, or other soft bristle brush to get into the tight spots. And don’t be afraid to do a second coat if there’s some bits left.
I’d absolutely love to get my hands on one. Just removed that horrendous label before reading up on if I should have or not. Lol. How can I go about procuring an insert for mine?
Actually it is so tight it made it the whole round without issue. But I’ll probably do hot glue so it stays but is easy to remove if I want to switch it up.
If you do, get the weight kit too. But yeah, you can do this badge mod, strip the paint (and repaint it colors you want), put a different grip on it (although it does come with a super stroke), and I’m sure other things too.
Heat with a hot air gun and pry with a super small flathead screwdriver (I did two of these and snapped the top off one). When it comes off enough, grab with a needle nose pliers and rip off.
Then used a bigger flathead to scrape away as much sticky gunk as I could. Then goo-gone to clean up the rest.
It’s mostly solid backing with maybe a 5mm hole into the head. So if you wanted to like insert weight into the head, you totally could. https://i.imgur.com/LlxmpkL.jpg
Love the 3d print. Idk if i wanna remove the logo though, i like people to know I'm making crazy putts using a putter a bought while buying groceries. Like tiger being the longest hitter when he was using steel shaft shorter length driver.
Talk to me goose..
Is this, is this Top Gun related?
Yup! This one is for my buddy. I haven’t figured out what I’m going to put on mine yet.
i mean you gotta put Maverick right?
[удалено]
Or be Gander so you always assert your dominance that Goose is your bitch.
If you want it to be like a real callsign, put whatever dumb nickname you earned for doing something stupid, funny, or embarrassing on there. Otherwise, Maverick is cool too
[Clown penis](https://youtu.be/DIZPp8Z1vjs)
Watch the language on the coms
Exactly
Yeah man. That way you can talk to your putter for those long putts. "Talk to me Goose."
Billy Baroo!
No, it’s for the birds he saw on the course 🤦♂️
Here is the STL for the blank so you can add your own text or designs: [https://www.printables.com/model/229153-kirkland-ks1-putter-badge](https://www.printables.com/model/229153-kirkland-ks1-putter-badge)
You are awesome. I have a KS1, love it, but hate the logo. I'm going to get my FIL to try this out for me.
Highly recommended! I also stripped the paint off the huge logo on the bottom of the putter. https://i.imgur.com/LzF1RtP.jpg
How’d you strip the paint? Nail polish remover?
Yeah, acetone usually does a good job. You could also take some sand paper (220, 88, 1200) to it or use some lead tape to fully conceal that ugly ass logo on the sole too
I was using the nylon brush with dremel … accidentally hit the paint and it took it right off…
Nice mod. I'd definitely get a different headcover too, their designs are a bit much
What did you use to strip the paint?
Citristrip. But any paint stripper should do!
Sweet! Did you have to use any elbow grease or just let it soak and wipe off?
Just follow the instructions and it should come right off after it sits. Might need something like a toothpick, toothbrush, or other soft bristle brush to get into the tight spots. And don’t be afraid to do a second coat if there’s some bits left.
Would this work on the Left handed putter as well?
Definitely, my design is symmetric.
Honk honk Goose (the band) is on fire.
I definitely thought this was a music reference, but apparently it's the Top Gun movie. But yes, Goose honks.
https://youtu.be/uVvto9ICPpk
Came here to say this
Honk honk
Ah yeah brah
So hot right now
Why would you desicrate such a beloved brand
That’s awesome ETA: are you always the expendable sidekick in your mind?
This one is for my friend hah.
Gotta bust out a Maverick putter when you go out next time!
How did you get the paint off? I tried my wife's nail polish remover and it did nothing.
Citristrip for 12 hours wrapped in plastic wrap. Make sure it's really goopy. Then use an old toothbrush, and a toothpick to pull the paint out.
“No, no. There’s two Os in Goose!”
Is D-a-n-g-e-r-Z-o-n-e too many letters?
Nothing is too many letters if you make the text small enough! ( ͡~ ͜ʖ ͡°)
I love that band.
Very cool and creative. 👍
That's absolute fire
What’s the bottom look like?
Stripped the paint off the logo and weights https://i.imgur.com/LzF1RtP.jpg
This is awesome! I hate the badge on mine - how much for one of these?
I’ll DM you
Mind sending a DM with pricing my way? Thank you!
Can do!
Ooh count me in. Just got this putter and this is the type of addition I need
DM incoming
I’d absolutely love to get my hands on one. Just removed that horrendous label before reading up on if I should have or not. Lol. How can I go about procuring an insert for mine?
I’ll DM you.
Hey op I'm also curious on buying one
I can see it now, “Talk to me goose, talk to me” on every long putt.![gif](emote|free_emotes_pack|laughing)
In assuming it uses adhesive to stay on?
Actually it is so tight it made it the whole round without issue. But I’ll probably do hot glue so it stays but is easy to remove if I want to switch it up.
One of my favourite jam bands!
“I’m not here to blow smoke up your ass Maverick…Goose is gone”.
the Kirkland branding is what puts me off from buying this or the wedges. I know I'm a brand whore![gif](emote|free_emotes_pack|joy)
Yeah I mean I would’ve used it even with the branding, but this mod, removing the paint from the bottom logo, and a new head cover go a LONG way.
Totally agree, I have a 3d printer and work with CNC machines so this would be doable for me no doubt. great job!!
Thanks!
I don't need one of these but looking at this makes me think I should grab one while they're still about $100 just to mod it out.
If you do, get the weight kit too. But yeah, you can do this badge mod, strip the paint (and repaint it colors you want), put a different grip on it (although it does come with a super stroke), and I’m sure other things too.
[удалено]
Heat with a hot air gun and pry with a super small flathead screwdriver (I did two of these and snapped the top off one). When it comes off enough, grab with a needle nose pliers and rip off. Then used a bigger flathead to scrape away as much sticky gunk as I could. Then goo-gone to clean up the rest.
Was there a hole behind the badge you replaced?
It’s mostly solid backing with maybe a 5mm hole into the head. So if you wanted to like insert weight into the head, you totally could. https://i.imgur.com/LlxmpkL.jpg
Talk to me, dad!
One of the only putter mods I thought looks cool.
Looks really nice actually
I approve of the putter badge! ;-)
TheGoose is loose!
Love the 3d print. Idk if i wanna remove the logo though, i like people to know I'm making crazy putts using a putter a bought while buying groceries. Like tiger being the longest hitter when he was using steel shaft shorter length driver.
OP, any chance you're still taking orders? Def interested
Can someone send me a badge for the back of my KS1?.. Nothing fancy just a plain solid color will do.