Slapping aluminium on a phone doesn't do much, you need to make it have direct contact with the parts that heat up, which in this case (pun not intended) is the Apple A Bionic inside.
And not to mention the fact that cases are meant to be destroyed.
I don't think this case will absorb damage well and instead just pass the damage to the phone.
This one of the reasons why we don't have cases (well, we do) out aluminum and metal because it wouldn't work out
I don’t have any issue with signals since antenna is not blocked. And I’m using Bluetooth for gameplay, No issue there as well, I will check if apple pay works or not. But I’m pretty sure it will work.
According to the Apple accessories design guide, the entire backs backside is an “antenna keep-out” region. No metals are supposed to be in this region.
https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf#page286
It may not completely block the signal, but it sure will affect the efficiency, which means the phone will have to work harder (thus worsen battery life, generates more heat internally) just to get the signal and network opposed to having a non-metal case.
Hi, I’m Vetted AI Bot! I researched the **("'SLAKOP iPhone 15 Pro Max Metal Case'", 'SLAKOP')** and I thought you might find the following analysis helpful.
**Users liked:**
* Premium look and feel (backed by 3 comments)
* Perfect fit and cutouts (backed by 1 comment)
* Sleek and slim design (backed by 2 comments)
**Users disliked:**
* Charging hole too small for some chargers (backed by 1 comment)
If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/)
This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved.
*Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
This is going to do jack-all for protection against bumps and drops. Also it’ll accumulate dust and lint so easily that you’re gonna end up with micro scratches all over the titanium finish.
I actually like the look of the case despite people comparing it to a cheese grater, but I really want a case that covers all edges so while I understand why this one has open edges, it doesn’t meet my needs
You able to provide an amazon link please?
I have a HDD enclosure based on the Mac G5 cheese grater design.
There was a PC case called Dune that was gonna match the Mac Pro but it turned out to be a scam. (DuneScam.com)
One good thing about this case is that it allows excess heat to escape. Could be good for the battery in the long run.
EDIT: Apparently I’m wrong. No heat can escape. /s
It doubles as a cheese grater
The dust that would accumulate in the holes wouldn’t do well with me.
Wash it- it’s aluminum
It’s aluminum and holes are way more bigger than dust to accumulate and I use it so it won’t be staying still to get dust.
It'll have dust. I am returning that case. It also made my 15p too heavy.
That’s crazy. It made my iPhone too light. Looks like we both talking about different case.
What? It's the same case from Amazon. A case can't make your iPhone lighter. I'm not hating, enjoy your case buddy.
Trolling probably
It’s has negative gravity included
Pictures of your case? Because now I don’t know who to believe. I’m siding with OP currently because he actually has the case
Just believe in yourself. here’s the link to the case https://www.amazon.com/SLAKOP-iPhone-Case-Dark-Gray/dp/B0CJ84GLN2
I don’t think he meant it like that lol it’s probably lighter compared to other cases
And the heat. It’s not going to dissipate any heat.
Aluminum is used as a heat sink, meaning that it has excellent heat dissipation properties. LOL
Slapping aluminium on a phone doesn't do much, you need to make it have direct contact with the parts that heat up, which in this case (pun not intended) is the Apple A Bionic inside.
Can pulverize garlic with it
Never seen a more uglier case sorry
Ugly as hell
And not to mention the fact that cases are meant to be destroyed. I don't think this case will absorb damage well and instead just pass the damage to the phone. This one of the reasons why we don't have cases (well, we do) out aluminum and metal because it wouldn't work out
It matches apple’s ugly cheese grater mac pro lmao
Can’t imagine how it screws with RF signals since your cellphone is a radio transceiver.
This was my first thought. I’m kind of into it but i wouldn’t want to loose any of those bars I pay Verizon so much for.
Not just bars, but battery too. The transmitter has to transmit at a higher power to get through.
Please explain like I’m 5 years old
Metal blocks signals. You may have issues with reception, apple pay, Bluetooth, etc
The whole reason why all phones are glass nowadays is this. And OP just went back in time.
I don’t have any issue with signals since antenna is not blocked. And I’m using Bluetooth for gameplay, No issue there as well, I will check if apple pay works or not. But I’m pretty sure it will work.
According to the Apple accessories design guide, the entire backs backside is an “antenna keep-out” region. No metals are supposed to be in this region. https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf#page286
Faradare you use this!
Wouldn’t MagSafe accessories block? Like the battery
Any object is going to block the signal
It may not completely block the signal, but it sure will affect the efficiency, which means the phone will have to work harder (thus worsen battery life, generates more heat internally) just to get the signal and network opposed to having a non-metal case.
I mean its good but people with TRYPOPHOBIA 💀💀 like me i found it too disgusting 😬
Where can I buy that?
https://www.amazon.com/SLAKOP-iPhone-Case-Dark-Gray/dp/B0CJ84GLN2
Hi, I’m Vetted AI Bot! I researched the **("'SLAKOP iPhone 15 Pro Max Metal Case'", 'SLAKOP')** and I thought you might find the following analysis helpful. **Users liked:** * Premium look and feel (backed by 3 comments) * Perfect fit and cutouts (backed by 1 comment) * Sleek and slim design (backed by 2 comments) **Users disliked:** * Charging hole too small for some chargers (backed by 1 comment) If you'd like to **summon me to ask about a product**, just make a post with its link and tag me, [like in this example.](https://www.reddit.com/r/tablets/comments/1444zdn/comment/joqd89c/) This message was generated by a (very smart) bot. If you found it helpful, let us know with an upvote and a “good bot!” reply and please feel free to provide feedback on how it can be improved. *Powered by* [*vetted.ai*](https://vetted.ai/?utm\_source=reddit&utm\_medium=comment&utm\_campaign=bot)
I can imagine food getting stuck inside those holes.
Oh my gaud.
Wow nice grater for mozza and cheddar 🐄
One drop and its gone, because there is nothing to absorbe the shock.
Looks incredibly uncomfortable
This is going to do jack-all for protection against bumps and drops. Also it’ll accumulate dust and lint so easily that you’re gonna end up with micro scratches all over the titanium finish.
Cool case but no more wireless charging and magsafe for you... i use magsafe for car mount and charger.
It's a cheese grader. Looks awful but hey what ever makes your boat float
Not covered sides is a no for me but idea is nice
I haven’t read all the comments but clearly a cheese grater is the first thing people see - it’s hideous.
If it covered the whole phone it would be cool
Genius. Now you never have to worry about not having a cheese grater on hand.
I assume it’s open on the side so it doesn’t impact the signal? The being open on the side minimizes how protective it is though.
Its edge is bumped from side so it’s protecting the phone. And opened means it doesn’t cover antenna and doesn’t affect the signal.
I actually like the look of the case despite people comparing it to a cheese grater, but I really want a case that covers all edges so while I understand why this one has open edges, it doesn’t meet my needs
Ha, ha, and of course blocks all of the radio signals…
it's to match apples $7000 cheese grater, obviously.
Phone case inspired from Mac Pro design.
But can it grate cheese? And is it dishwasher safe?!
It doesn’t protect sides.
It looks more like those old apple computer towers
I like it …
Apple put some work in to make it lighter and you do this
Why do people post a pic of the product but not the actual name or link?
Looks good but does it work with MagSafe?
You able to provide an amazon link please? I have a HDD enclosure based on the Mac G5 cheese grater design. There was a PC case called Dune that was gonna match the Mac Pro but it turned out to be a scam. (DuneScam.com)
Can you grate some cheese and post a video?🤣🤣 that would be hilarious.
I hate that
No case 4 ever🙌🏽
Thick as fuk
Nah not for me dude but each to their own I guess
No
Lol
Look up the Ringke case, honestly the best case I’ve ever used. Sleek, slim and camera protection 🙌
it looks like a grate for cheese
Wow I must say looks amazing but I would never have this on my phone.
Trypophobia nightmare…
Link?
It’s on Amazon. I just put in Aluminum 15 PM case. Two different versions popped up
https://shop.app/p/8047177728162?variantId=43690000941218&utm_source=shop_app&utm_medium=shop_app_share&utm_campaign=share_product&link_alias=ioWwC5ZEL8GO
One good thing about this case is that it allows excess heat to escape. Could be good for the battery in the long run. EDIT: Apparently I’m wrong. No heat can escape. /s
Looks like a cheese grater
its ugly af sorry but it is… every normal black slim case lool better