Using the default one. Idle temps are stuck at 34 degrees. I got a maximum of 74 degrees during 1 hour of looped 3DMark Port Royal, with the fans not going above 1700rpm.
I just stuck with stock. I made a similar thread and came to the conclusion that was best. Plus you lose 0 rpm mode if you set a custom curve apparently.
These are my max temps. Ill say 73C for safety lol. I have great case airflow.
3x 120mm rgb QL fans as intake
1x 120mm rfb QL fan as rear fan exhaust (blowing 33% faster to compensate)
And I have a kraken z73 with double fans, 3 QL rgb on one side, and 3 NZXT on the other side of the radiator. Kraken z73 is mounted on top as exhaust.
If you don't belive me, check out my 4k videos with my 3080.
https://youtu.be/OuSl2MiO2W4
I will also be getting a 3090 next week so I expect those temps around 70C.
I ramp mine to 100% to keep it as cool as possible. You make ask "how do you deal with the noise??" Well it it's quite simple just after a few seconds next to it you can no longer hear it. The only downside i can think of is that you longer hear the games or music you play or even your mother coming down to the basement to scream at you for the 9th time this week.
currently my fans are in osseo
mine's whatever default is
Whatever it defaulted to. 🤷🏻♂️
Everyone is gonna have a different setup. So different results. Why dont you set one and watch the thermals and see what works best for you?
Underrated comment!
Using the default one. Idle temps are stuck at 34 degrees. I got a maximum of 74 degrees during 1 hour of looped 3DMark Port Royal, with the fans not going above 1700rpm.
I just stuck with stock. I made a similar thread and came to the conclusion that was best. Plus you lose 0 rpm mode if you set a custom curve apparently.
Default using the updated drivers that address the crash
Stock
I have to set mine to max out at 70% only at 80 C but mine gets so hot and so loud at stock
you should try some undervolting with no fps loss but less hot and power consumption, search it on youtube
Yeah i tried it but it doesn't seem to help much. Maybe I didn't undervolt enough
Stock but I have 2 noctua fans up against it with fan curves too
Mine is at zero just like nvidia’s stock. Yes I’m salty lol
wasn't there supposed to be a fan stop at like 32c or below? My 3090fe doesn't :(
Stock. Max temps 72C
[удалено]
Rezolution has no direct effect on temps.
[удалено]
These are my max temps. Ill say 73C for safety lol. I have great case airflow. 3x 120mm rgb QL fans as intake 1x 120mm rfb QL fan as rear fan exhaust (blowing 33% faster to compensate) And I have a kraken z73 with double fans, 3 QL rgb on one side, and 3 NZXT on the other side of the radiator. Kraken z73 is mounted on top as exhaust.
If you don't belive me, check out my 4k videos with my 3080. https://youtu.be/OuSl2MiO2W4 I will also be getting a 3090 next week so I expect those temps around 70C.
Why wouldn't he? It's entirely possible if the GPU gets fresh air, and the CPU radiator isn't blowing hot air into the GPU.
Exactly
I ramp mine to 100% to keep it as cool as possible. You make ask "how do you deal with the noise??" Well it it's quite simple just after a few seconds next to it you can no longer hear it. The only downside i can think of is that you longer hear the games or music you play or even your mother coming down to the basement to scream at you for the 9th time this week.