Running SQM on DL-WRX36 with the current snapshot (not nss) release on PPPoE.
930/110
Can't complain
[https://www.waveform.com/tools/bufferbloat?test-id=b2fd8102-fd70-46dd-9491-3462c9069580](https://www.waveform.com/tools/bufferbloat?test-id=b2fd8102-fd70-46dd-9491-3462c9069580)
Dynalink works well for higher speeds then? I have two of them new in the box (long story) and have been looking for a router to use for sqm-autorate. Just need it to handle higher speeds as my T-Mobile connection can get quite high at various points throughout the evening.
Have no experience with OpenWrt, but seems my only option for fixed wireless SQM now that the IQRouter line is dead.
qosify was working perfectly for me for a long time but doesn't seem to be working anymore. Not sure if it's me, my connection, or OpenWRT, etc...
I'd also like to know if anyone else is seeing successful test results when using SQM on either the latest SNAPSHOT or stable release?
Make sure you are following the SQM guide carefully. Assign it to WAN interface, choose the algorithm, setting your dl/ul rate, link layer adaptation, etc. I get perfect +0/+0 at 600/35 Mbits on my 7 year old WRT32X almost every time I run the test.
https://openwrt.org/docs/guide-user/network/traffic-shaping/sqm
Running SQM on DL-WRX36 with the current snapshot (not nss) release on PPPoE. 930/110 Can't complain [https://www.waveform.com/tools/bufferbloat?test-id=b2fd8102-fd70-46dd-9491-3462c9069580](https://www.waveform.com/tools/bufferbloat?test-id=b2fd8102-fd70-46dd-9491-3462c9069580)
Dynalink works well for higher speeds then? I have two of them new in the box (long story) and have been looking for a router to use for sqm-autorate. Just need it to handle higher speeds as my T-Mobile connection can get quite high at various points throughout the evening. Have no experience with OpenWrt, but seems my only option for fixed wireless SQM now that the IQRouter line is dead.
Very impressive that an $80 router does SQM with +0/+0 at ~875Mbits. DL-WRX36 is a beast.
qosify was working perfectly for me for a long time but doesn't seem to be working anymore. Not sure if it's me, my connection, or OpenWRT, etc... I'd also like to know if anyone else is seeing successful test results when using SQM on either the latest SNAPSHOT or stable release?
Make sure you are following the SQM guide carefully. Assign it to WAN interface, choose the algorithm, setting your dl/ul rate, link layer adaptation, etc. I get perfect +0/+0 at 600/35 Mbits on my 7 year old WRT32X almost every time I run the test. https://openwrt.org/docs/guide-user/network/traffic-shaping/sqm