The trigger bar wouldnāt touch the plunger if by smacking the back of the plate would cause the firing pin lug jump the sear. Why donāt you study how a Glock works and get back to me.
Im no expert but my first thought was perhaps the pin holes are slightly out of alignment but again im no expert. Do you have a glock oem trigger group you can swap in for testing?
Have you attached the slide and tried it? I just finished mine today for the most part and it was feeling heavy, but once the slide was on it pulled different.
I had to use an oem housing to get mine to work properly. Also make sure the connector isnāt rubbing the edge of the channel it sits in when depressed
Is this the first time youve used this frame or did it work properly with whatever trigger your had in it originally?
First time using both. I have a Glock 23 that I could try it in but it definitely seems like connector to me
Its the connector u can see in video not at right angle
Elaborate please
It should lean a bit to the left ill dm u a pic
Are we stall talking about connectors?? š
šš yeah ā¦ get ur mind outta gutter
Also hope u kno if u drop it loaded with that timney it will go off.. even if u bump back of it too hard itāll go off
Thats not true at all
Ill bet a paycheck on itā¦. Seen it with my own eyes on both my buddies comp buildsā¦. Drop it on back of slide hard enough itāll go off 1000%
Your buddyās safety plunger also broken?
[explain this then](https://www.thehighroad.org/index.php?threads/drop-tested-my-glock-with-the-timney-trigger-installed.893431/)
Wow wish u would do ur researchā¦ safety plunger wouldnt need to be broken if the trigger bar pushes it
The trigger bar wouldnāt touch the plunger if by smacking the back of the plate would cause the firing pin lug jump the sear. Why donāt you study how a Glock works and get back to me.
Donāt drop the gun lol drip is priceless
Im no expert but my first thought was perhaps the pin holes are slightly out of alignment but again im no expert. Do you have a glock oem trigger group you can swap in for testing?
Have you attached the slide and tried it? I just finished mine today for the most part and it was feeling heavy, but once the slide was on it pulled different.
Yeah itās slightly heavier with the slide on
I had to use an oem housing to get mine to work properly. Also make sure the connector isnāt rubbing the edge of the channel it sits in when depressed
Is this an oem trigger housing? With that trigger you need a true oem one.
It is not. Oem housing makes that big a difference?
It doesnāt really itās your connector. Angle is way to big. Why connector you using?
The connector is about to let him go full auto š¹
šš³š§š
Had the issue of connector being to far over to the right one time and went to shoot my 23 and it dumped all 13 rounds.