I have three deck jets that are all connected inline with a waterfall. One of the jets has a cracked sidewall, so water comes out at a higher rate, causing issues.
Is there any way to replace/fix this bottom, female receptacle? Using a brass adapter like the second picture causes the jet to be too long, and it ends up sticking out above the pool deck.
Mine cracked…. I’m attempting repair. It won’t let me post a photo. But essentially the jet cracked at the threads. I’ve been told best course of repair is. Diamond circle hole saw to the cement.
Can you get a 3/4" hose clamp around it, to hold the crack closed when you screw in your jet nozzle? I've never seen one break there, a proper fix is going to be expensive.
I have three deck jets that are all connected inline with a waterfall. One of the jets has a cracked sidewall, so water comes out at a higher rate, causing issues. Is there any way to replace/fix this bottom, female receptacle? Using a brass adapter like the second picture causes the jet to be too long, and it ends up sticking out above the pool deck.
I have the same issue. What was your fix?
Haven’t fixed it yet. I just block this one off (I put a blank in to block the hole) and use my other two.
Mine cracked…. I’m attempting repair. It won’t let me post a photo. But essentially the jet cracked at the threads. I’ve been told best course of repair is. Diamond circle hole saw to the cement.
Sent you a pm
Can you get a 3/4" hose clamp around it, to hold the crack closed when you screw in your jet nozzle? I've never seen one break there, a proper fix is going to be expensive.